[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160129142625.GH10187@pd.tnic>
Date: Fri, 29 Jan 2016 15:26:25 +0100
From: Borislav Petkov <bp@...en8.de>
To: Andy Lutomirski <luto@...nel.org>
Cc: x86@...nel.org, linux-kernel@...r.kernel.org,
Brian Gerst <brgerst@...il.com>,
Dave Hansen <dave.hansen@...ux.intel.com>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Oleg Nesterov <oleg@...hat.com>,
"linux-mm@...ck.org" <linux-mm@...ck.org>,
Andrey Ryabinin <aryabinin@...tuozzo.com>
Subject: Re: [PATCH v2 3/3] x86/mm: If INVPCID is available, use it to flush
global mappings
On Mon, Jan 25, 2016 at 10:37:44AM -0800, Andy Lutomirski wrote:
> On my Skylake laptop, INVPCID function 2 (flush absolutely
> everything) takes about 376ns, whereas saving flags, twiddling
> CR4.PGE to flush global mappings, and restoring flags takes about
> 539ns.
FWIW, I ran your microbenchmark on the IVB laptop I have here 3 times
and some of the numbers from each run are pretty unstable. Not that it
means a whole lot - the thing doesn't have INVPCID support.
I'm just questioning the microbenchmark and whether we should be rather
doing those measurements with a real benchmark, whatever that means. My
limited experience says that measuring TLB performance is hard.
./context_switch_latency 0 thread same
use_xstate = 0
Using threads
1: 100000 iters at 2676.2 ns/switch
2: 100000 iters at 2700.2 ns/switch
3: 100000 iters at 2656.1 ns/switch
./context_switch_latency 0 thread different
use_xstate = 0
Using threads
1: 100000 iters at 5174.8 ns/switch
2: 100000 iters at 5140.5 ns/switch
3: 100000 iters at 5292.9 ns/switch
./context_switch_latency 0 process same
use_xstate = 0
Using a subprocess
1: 100000 iters at 2361.2 ns/switch
2: 100000 iters at 2332.2 ns/switch
3: 100000 iters at 3436.9 ns/switch
./context_switch_latency 0 process different
use_xstate = 0
Using a subprocess
1: 100000 iters at 4713.6 ns/switch
2: 100000 iters at 4957.5 ns/switch
3: 100000 iters at 5012.2 ns/switch
./context_switch_latency 1 thread same
use_xstate = 1
Using threads
1: 100000 iters at 2505.6 ns/switch
2: 100000 iters at 2483.1 ns/switch
3: 100000 iters at 2479.7 ns/switch
./context_switch_latency 1 thread different
use_xstate = 1
Using threads
1: 100000 iters at 5245.9 ns/switch
2: 100000 iters at 5241.1 ns/switch
3: 100000 iters at 5220.3 ns/switch
./context_switch_latency 1 process same
use_xstate = 1
Using a subprocess
1: 100000 iters at 2329.8 ns/switch
2: 100000 iters at 2350.2 ns/switch
3: 100000 iters at 2500.9 ns/switch
./context_switch_latency 1 process different
use_xstate = 1
Using a subprocess
1: 100000 iters at 4970.7 ns/switch
2: 100000 iters at 5034.0 ns/switch
3: 100000 iters at 4991.6 ns/switch
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
Powered by blists - more mailing lists