lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160130201452.GC30429@amd>
Date:	Sat, 30 Jan 2016 21:14:52 +0100
From:	Pavel Machek <pavel@....cz>
To:	Tony Lindgren <tony@...mide.com>
Cc:	pali.rohar@...il.com, sre@...nel.org,
	kernel list <linux-kernel@...r.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
	linux-omap@...r.kernel.org, khilman@...nel.org,
	aaro.koskinen@....fi, ivo.g.dimitrov.75@...il.com,
	patrikbachan@...il.com, serge@...lyn.com
Subject: Re: N900 sleep mode (in 4.5-rc0, if that matters)

On Sat 2016-01-30 21:02:45, Pavel Machek wrote:
> Hi!
> 
> > > ffdffe8d 48004a20 (fa004a20) cm_idlest1_core blocking bits: 00200072
> > > 0000000d 48004a28 (fa004a28) cm_idlest3_core
> > > 
> > > cm_idlest1_core changes periodicall often, to 00218072. The rest seems
> > > constant.
> > 
> > For cm_idlest1_core 42 is the answer.. Here you have bits 4 and 5
> > blocking which is for OTG and it's PHY. That's a known issue with
> > musb and setting pm_runtime_irq_safe() on the MUSB parent.
> > 
> > If you do rmmod omap2430 and phy-twl4030usb chances are the LEDs will
> > start going off assuming the McSPI bit goes low with WLAN idling.
> 
> Ok, so I tried to compile kernel without omap2430/phy-twl4030usb
> . That did not help. So I thought, ok, maybe rmmod is needed to
> trigger some powersaving? But that is not exactly easy to do:
> 
> pavel@...0:/my/tui/ofone$ sudo insmod /my/modules/omap2430.ko
> pavel@...0:/my/tui/ofone$ sudo insmod /my/modules/phy-twl4030-usb.ko
> pavel@...0:/my/tui/ofone$ sudo rmmod phy-twl4030-usb.ko
> Error: Module phy_twl4030_usb is in use
> pavel@...0:/my/tui/ofone$
> 
> Any ideas what jumps to use the modules? Charger code?

I tried a kernel without charger code, and no luck, rmmod fails the
same way. dmesg says:
[  111.093078] wlan0: authenticated
[  111.097442] wlan0: associate with 06:27:22:f9:10:6a (try 1/3)
[  111.104553] wlan0: RX AssocResp from 06:27:22:f9:10:6a (capab=0x421
status=0 aid=2)
[  111.104705] wlan0: AP has invalid WMM params (AIFSN=1 for ACI 2),
will use 2
[  111.104736] wlan0: AP has invalid WMM params (AIFSN=1 for ACI 3),
will use 2
[  111.256652] wlan0: associated
[  184.681427] HS USB OTG: no transceiver configured
[  184.681488] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
with status -517
[  184.681976] HS USB OTG: no transceiver configured
[  184.682006] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
with status -517
[  187.690338] twl4030_usb 48070000.i2c:twl@48:twl4030-usb:
Initialized TWL4030 USB module
[  187.698303] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk
combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[  187.698333] musb-hdrc: MHDRC RTL version 1.400
[  187.698333] musb-hdrc: setup fifo_mode 4
[  187.698394] musb-hdrc: 28/31 max ep, 16384/16384 memory
pavel@...0:/my/tui/ofone$

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ