[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAGS+omAaj6afPrFYyFB3M-g6bpJeVDgJvYJx5rtu5kjCH=Gtzg@mail.gmail.com>
Date: Mon, 1 Feb 2016 19:42:37 +0800
From: Daniel Kurtz <djkurtz@...omium.org>
To: Liguo Zhang <liguo.zhang@...iatek.com>
Cc: Wolfram Sang <wsa@...-dreams.de>,
srv_heupstream <srv_heupstream@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Eddie Huang <eddie.huang@...iatek.com>,
Xudong Chen <xudong.chen@...iatek.com>,
Sascha Hauer <s.hauer@...gutronix.de>,
Linux I2C <linux-i2c@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH v5] i2c: mt8173: add 4GB mode support in i2c driver.
On Mon, Feb 1, 2016 at 9:58 AM, Liguo Zhang <liguo.zhang@...iatek.com> wrote:
> If 4GB mode is enable, we should add 4gb mode support in i2c driver.
> Set 4GB mode register to support 4GB mode.
>
> Signed-off-by: Liguo Zhang <liguo.zhang@...iatek.com>
> ---
> change in v5:
> Use BIT_ULL() to fix kernel building warning.
> change in v4:
> Use BIT_ULL() to fix kernel building warning.
> change in v3:
> Only inline the computation of reg_4g_mode in mtk_i2c_set_4g_mode().
> change in v2:
> Define a static inline function mtk_i2c_set_4g_mode() for support 4g mode.
> ---
> drivers/i2c/busses/i2c-mt65xx.c | 42 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index aec8e6c..e054205 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -60,6 +60,7 @@
> #define I2C_DMA_INT_FLAG_NONE 0x0000
> #define I2C_DMA_CLR_FLAG 0x0000
> #define I2C_DMA_HARD_RST 0x0002
> +#define I2C_DMA_4G_MODE 0x0001
>
> #define I2C_DEFAULT_SPEED 100000 /* hz */
> #define MAX_FS_MODE_SPEED 400000
> @@ -88,6 +89,8 @@ enum DMA_REGS_OFFSET {
> OFFSET_RX_MEM_ADDR = 0x20,
> OFFSET_TX_LEN = 0x24,
> OFFSET_RX_LEN = 0x28,
> + OFFSET_TX_4G_MODE = 0x54,
> + OFFSET_RX_4G_MODE = 0x58,
> };
>
> enum i2c_trans_st_rs {
> @@ -133,6 +136,7 @@ struct mtk_i2c_compatible {
> unsigned char dcm: 1;
> unsigned char auto_restart: 1;
> unsigned char aux_len_reg: 1;
> + unsigned char support_33bits: 1;
> };
>
> struct mtk_i2c {
> @@ -182,6 +186,7 @@ static const struct mtk_i2c_compatible mt6577_compat = {
> .dcm = 1,
> .auto_restart = 0,
> .aux_len_reg = 0,
> + .support_33bits = 0,
> };
>
> static const struct mtk_i2c_compatible mt6589_compat = {
> @@ -190,6 +195,7 @@ static const struct mtk_i2c_compatible mt6589_compat = {
> .dcm = 0,
> .auto_restart = 0,
> .aux_len_reg = 0,
> + .support_33bits = 0,
> };
>
> static const struct mtk_i2c_compatible mt8173_compat = {
> @@ -198,6 +204,7 @@ static const struct mtk_i2c_compatible mt8173_compat = {
> .dcm = 1,
> .auto_restart = 1,
> .aux_len_reg = 1,
> + .support_33bits = 1,
> };
>
> static const struct of_device_id mtk_i2c_of_match[] = {
> @@ -366,6 +373,11 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk,
> return 0;
> }
>
> +static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
> +{
> + return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
> +}
> +
> static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> int num, int left_num)
> {
> @@ -373,6 +385,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> u16 start_reg;
> u16 control_reg;
> u16 restart_flag = 0;
> + u32 reg_4g_mode = 0;
nit: unnecessary init (as Yingjoe mentioned earlier).
Otherwise, this one is:
Reviewed-by: Daniel Kurtz <djkurtz@...omium.org>
Powered by blists - more mailing lists