| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <56AF44B2.5080705@ti.com>
Date: Mon, 1 Feb 2016 17:12:42 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Alban Bedel <albeu@...e.fr>, <linux-kernel@...r.kernel.org>
CC: Andrew Morton <akpm@...ux-foundation.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"David S. Miller" <davem@...emloft.net>,
Mauro Carvalho Chehab <mchehab@....samsung.com>,
Joe Perches <joe@...ches.com>, Jiri Slaby <jslaby@...e.com>
Subject: Re: [PATCH v3 1/2] phy: Add a driver for simple phy
Hi,
On Friday 29 January 2016 01:22 AM, Alban Bedel wrote:
> This driver is meant to take care of all trivial phys that don't need
> any special configuration, it just enable a regulator, a clock and
> deassert a reset. A public API is also included to allow re-using the
> code in other drivers.
>
> Signed-off-by: Alban Bedel <albeu@...e.fr>
> ---
please also include what changed from the previous versions here or in the
cover letter.
> drivers/phy/Kconfig | 12 +++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-simple.c | 204 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/phy/simple.h | 39 +++++++++
> 4 files changed, 256 insertions(+)
> create mode 100644 drivers/phy/phy-simple.c
> create mode 100644 include/linux/phy/simple.h
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index e7e117d..efbaee4 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -125,6 +125,18 @@ config PHY_RCAR_GEN3_USB2
> help
> Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
>
> +config PHY_SIMPLE
> + tristate
> + select GENERIC_PHY
> + help
> +
> +config PHY_SIMPLE_PDEV
> + tristate "Simple PHY driver"
> + select PHY_SIMPLE
> + help
> + A PHY driver for simple devices that only need a regulator, clock
> + and reset for power up and shutdown.
> +
> config OMAP_CONTROL_PHY
> tristate "OMAP CONTROL PHY Driver"
> depends on ARCH_OMAP2PLUS || COMPILE_TEST
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index c80f09d..1cc7268 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
> obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
> obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
> obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
> +obj-$(CONFIG_PHY_SIMPLE) += phy-simple.o
> obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
> obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
> obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
> diff --git a/drivers/phy/phy-simple.c b/drivers/phy/phy-simple.c
> new file mode 100644
> index 0000000..013f846
> --- /dev/null
> +++ b/drivers/phy/phy-simple.c
> @@ -0,0 +1,204 @@
> +/*
> + * Copyright (C) 2015 Alban Bedel <albeu@...e.fr>
2016?
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/phy/simple.h>
> +#include <linux/clk.h>
> +#include <linux/reset.h>
> +
> +int simple_phy_power_on(struct phy *phy)
> +{
> + struct simple_phy *sphy = phy_get_drvdata(phy);
> + int err;
> +
> + if (sphy->regulator) {
> + err = regulator_enable(sphy->regulator);
> + if (err)
> + return err;
> + }
phy_power_on already enables the regulator, so this might be redundant. A
simple PHY can have multiple regulators?
Also this doesn't have reference count. I think we should try to reuse the
existing phy_* APIs for simple PHY.
> +
> + if (sphy->clk) {
> + err = clk_prepare_enable(sphy->clk);
> + if (err)
> + goto regulator_disable;
> + }
how do we enable multiple clocks?
> +
> + if (sphy->reset) {
> + err = reset_control_deassert(sphy->reset);
> + if (err)
> + goto clock_disable;
> + }
> +
> + return 0;
> +
> +clock_disable:
> + if (sphy->clk)
> + clk_disable_unprepare(sphy->clk);
> +regulator_disable:
> + if (sphy->regulator)
> + WARN_ON(regulator_disable(sphy->regulator));
> +
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(simple_phy_power_on);
> +
> +int simple_phy_power_off(struct phy *phy)
> +{
> + struct simple_phy *sphy = phy_get_drvdata(phy);
> + int err;
> +
> + if (sphy->reset) {
> + err = reset_control_assert(sphy->reset);
> + if (err)
> + return err;
> + }
> +
> + if (sphy->clk)
> + clk_disable_unprepare(sphy->clk);
> +
> + if (sphy->regulator) {
> + err = regulator_disable(sphy->regulator);
> + if (err)
> + goto clock_enable;
> + }
> +
> + return 0;
> +
> +clock_enable:
> + if (sphy->clk)
> + WARN_ON(clk_prepare_enable(sphy->clk));
> + if (sphy->reset)
> + WARN_ON(reset_control_deassert(sphy->reset));
> +
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(simple_phy_power_off);
> +
> +static const struct phy_ops simple_phy_ops = {
> + .power_on = simple_phy_power_on,
> + .power_off = simple_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +struct phy *devm_simple_phy_create(struct device *dev,
> + const struct simple_phy_desc *desc,
> + struct simple_phy *sphy)
> +{
> + struct phy *phy;
> +
> + if (!dev || !desc)
> + return ERR_PTR(-EINVAL);
> +
> + if (!sphy) {
> + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
> + if (!sphy)
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + if (!IS_ERR_OR_NULL(desc->regulator)) {
> + sphy->regulator = devm_regulator_get(dev, desc->regulator);
> + if (IS_ERR(sphy->regulator)) {
> + if (PTR_ERR(sphy->regulator) == -ENOENT)
> + sphy->regulator = NULL;
> + else
> + return ERR_PTR(PTR_ERR(sphy->regulator));
> + }
> + }
> +
> + if (!IS_ERR(desc->clk)) {
> + sphy->clk = devm_clk_get(dev, desc->clk);
> + if (IS_ERR(sphy->clk)) {
> + if (PTR_ERR(sphy->clk) == -ENOENT)
> + sphy->clk = NULL;
> + else
> + return ERR_PTR(PTR_ERR(sphy->clk));
> + }
> + }
> +
> + if (!IS_ERR(desc->reset)) {
> + sphy->reset = devm_reset_control_get(dev, desc->reset);
> + if (IS_ERR(sphy->reset)) {
> + int err = PTR_ERR(sphy->reset);
> +
> + if (err == -ENOENT || err == -ENOTSUPP)
> + sphy->reset = NULL;
> + else
> + return ERR_PTR(err);
> + }
> + }
> +
> + phy = devm_phy_create(dev, NULL, desc->ops ?: &simple_phy_ops);
> + if (IS_ERR(phy))
> + return ERR_PTR(PTR_ERR(phy));
> +
> + phy_set_drvdata(phy, sphy);
> +
> + return phy;
> +}
> +EXPORT_SYMBOL_GPL(devm_simple_phy_create);
> +
> +#ifdef CONFIG_PHY_SIMPLE_PDEV
> +#ifdef CONFIG_OF
> +/* Default config, no regulator, default clock and reset if any */
> +static const struct simple_phy_desc simple_phy_default_desc = {};
> +
> +static const struct of_device_id simple_phy_of_match[] = {
> + { .compatible = "simple-phy", .data = &simple_phy_default_desc },
the compatible string should be documented.
Thanks
Kishon
Powered by blists - more mailing lists