[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160202223115.GE4652@lukather>
Date: Tue, 2 Feb 2016 23:31:15 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: codekipper@...il.com
Cc: linux-arm-kernel@...ts.infradead.org, linux-sunxi@...glegroups.com,
lgirdwood@...il.com, broonie@...nel.org,
linux-kernel@...r.kernel.org, alsa-devel@...a-project.org,
be17068@...rbole.bo.it
Subject: Re: [PATCH v3 1/2] dt-bindings: add sun4i SPDIF transceiver bindings
Hi,
On Tue, Feb 02, 2016 at 03:49:53PM +0100, codekipper@...il.com wrote:
> From: Marcus Cooper <codekipper@...il.com>
>
> Add devicetree bindings for the SPDIF transceiver found on
> found on Allwinners A10 and A20 SoCs.
>
> Signed-off-by: Marcus Cooper <codekipper@...il.com>
> ---
> .../devicetree/bindings/sound/sun4i,spdif.txt | 46 ++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/sun4i,spdif.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/sun4i,spdif.txt b/Documentation/devicetree/bindings/sound/sun4i,spdif.txt
> new file mode 100644
> index 0000000..55ed2f6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/sun4i,spdif.txt
> @@ -0,0 +1,46 @@
> +Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller
> +
> +The Allwinner S/PDIF audio block is a transceiver that allows the
> +processor to receive and transmit digital audio via an coaxial cable or
> +a fibre cable.
> +
> +Required properties:
> +
> + - compatible : should be one of the following:
> + - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
> +
> + - reg : Offset and length of the register set for the device.
> +
> + - interrupts : Contains the spdif interrupt.
> +
> + - dmas : Generic dma devicetree binding as described in
> + Documentation/devicetree/bindings/dma/dma.txt.
> +
> + - dma-names : Two dmas have to be defined, "tx" and "rx".
> +
> + - clocks : Contains an entry for each entry in clock-names.
> +
> + - clock-names : Includes the following entries:
> + "apb" clock for the spdif bus.
> + "spdif" clock for spdif controller.
> +
> +Optional:
> +
> + - spdif-in : Enable block for capturing an SPDIF signal.
> +
> + - spdif-out : Enable block for transmitting an SPDIF signal.
Is that a generic property? What values can it hold?
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists