linux-kernel - Applied "regulator: axp20x: Remove voltage readout support for switch regulators" to the regulator tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1aR1uJ-0006M5-9e@debutante>
Date:	Wed, 03 Feb 2016 18:11:59 +0000
From:	Mark Brown <broonie@...nel.org>
To:	Chen-Yu Tsai <wens@...e.org>, Mark Brown <broonie@...nel.org>
Cc:	linux-kernel@...r.kernel.org
Subject: Applied "regulator: axp20x: Remove voltage readout support for switch regulators" to the regulator tree

The patch

   regulator: axp20x: Remove voltage readout support for switch regulators

has been applied to the regulator tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 94c39041ae0c0e83d10bc1a56974a2eefd9386c8 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@...e.org>
Date: Tue, 2 Feb 2016 18:27:37 +0800
Subject: [PATCH] regulator: axp20x: Remove voltage readout support for switch
 regulators

Switch-type regulators, such as DC1SW on AXP22X, are a secondary output
from DCDC1. They are just an on/off switch, and the driver should not
try to read its voltage directly from the DCDC1 control registers.

Instead, the core will pass down the voltage from the regulator supply
chain.

Signed-off-by: Chen-Yu Tsai <wens@...e.org>
Signed-off-by: Mark Brown <broonie@...nel.org>
---
 drivers/regulator/axp20x-regulator.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index f2e1a39ce0f3..fafaaa8eb8b3 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -78,8 +78,7 @@
 		.ops		= &axp20x_ops,					\
 	}
 
-#define AXP_DESC_SW(_family, _id, _match, _supply, _min, _max, _step, _vreg,	\
-		    _vmask, _ereg, _emask) 					\
+#define AXP_DESC_SW(_family, _id, _match, _supply, _ereg, _emask)		\
 	[_family##_##_id] = {							\
 		.name		= #_id,						\
 		.supply_name	= (_supply),					\
@@ -87,12 +86,7 @@
 		.regulators_node = of_match_ptr("regulators"),			\
 		.type		= REGULATOR_VOLTAGE,				\
 		.id		= _family##_##_id,				\
-		.n_voltages	= (((_max) - (_min)) / (_step) + 1),		\
 		.owner		= THIS_MODULE,					\
-		.min_uV		= (_min) * 1000,				\
-		.uV_step	= (_step) * 1000,				\
-		.vsel_reg	= (_vreg),					\
-		.vsel_mask	= (_vmask),					\
 		.enable_reg	= (_ereg),					\
 		.enable_mask	= (_emask),					\
 		.ops		= &axp20x_ops_sw,				\
@@ -160,8 +154,6 @@ static struct regulator_ops axp20x_ops = {
 };
 
 static struct regulator_ops axp20x_ops_sw = {
-	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
-	.list_voltage		= regulator_list_voltage_linear,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -196,8 +188,8 @@ static const struct regulator_desc axp22x_regulators[] = {
 	AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
 		 AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
 	/* secondary switchable output of DCDC1 */
-	AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, 1600, 3400, 100,
-		    AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)),
+	AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
+		    BIT(7)),
 	/* LDO regulator internally chained to DCDC5 */
 	AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
 		 AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
-- 
2.7.0.rc3