[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <01cc31083ab67299d18425b6d9a6099479dbb549.1454530144.git.vilhelm.gray@gmail.com>
Date: Wed, 3 Feb 2016 15:15:22 -0500
From: William Breathitt Gray <vilhelm.gray@...il.com>
To: linus.walleij@...aro.org, gnurou@...il.com
Cc: linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/7] gpio: 104-idi-48: Use devm_request_region
By the time request_region is called in the ACCES 104-IDI-48 GPIO
driver, a corresponding device structure has already been allocated. The
devm_request_region function should be used to help simplify the cleanup
code and reduce the possible points of failure.
Signed-off-by: William Breathitt Gray <vilhelm.gray@...il.com>
Reviewed-by: Alexandre Courbot <acourbot@...dia.com>
---
drivers/gpio/gpio-104-idi-48.c | 25 ++++++++-----------------
1 file changed, 8 insertions(+), 17 deletions(-)
diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
index 285a075..81c98d5 100644
--- a/drivers/gpio/gpio-104-idi-48.c
+++ b/drivers/gpio/gpio-104-idi-48.c
@@ -39,7 +39,6 @@ MODULE_PARM_DESC(idi_48_irq, "ACCES 104-IDI-48 interrupt line number");
* @ack_lock: synchronization lock to prevent IRQ handler race conditions
* @irq_mask: input bits affected by interrupts
* @base: base port address of the GPIO device
- * @extent: extent of port address region of the GPIO device
* @irq: Interrupt line number
* @cos_enb: Change-Of-State IRQ enable boundaries mask
*/
@@ -49,7 +48,6 @@ struct idi_48_gpio {
spinlock_t ack_lock;
unsigned char irq_mask[6];
unsigned base;
- unsigned extent;
unsigned irq;
unsigned char cos_enb;
};
@@ -227,11 +225,10 @@ static int __init idi_48_probe(struct platform_device *pdev)
if (!idi48gpio)
return -ENOMEM;
- if (!request_region(base, extent, name)) {
- dev_err(dev, "Unable to lock %s port addresses (0x%X-0x%X)\n",
- name, base, base + extent);
- err = -EBUSY;
- goto err_lock_io_port;
+ if (!devm_request_region(dev, base, extent, name)) {
+ dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+ base, base + extent);
+ return -EBUSY;
}
idi48gpio->chip.label = name;
@@ -243,7 +240,6 @@ static int __init idi_48_probe(struct platform_device *pdev)
idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
idi48gpio->chip.get = idi_48_gpio_get;
idi48gpio->base = base;
- idi48gpio->extent = extent;
idi48gpio->irq = irq;
spin_lock_init(&idi48gpio->lock);
@@ -253,7 +249,7 @@ static int __init idi_48_probe(struct platform_device *pdev)
err = gpiochip_add_data(&idi48gpio->chip, idi48gpio);
if (err) {
dev_err(dev, "GPIO registering failed (%d)\n", err);
- goto err_gpio_register;
+ return err;
}
/* Disable IRQ by default */
@@ -264,24 +260,20 @@ static int __init idi_48_probe(struct platform_device *pdev)
handle_edge_irq, IRQ_TYPE_NONE);
if (err) {
dev_err(dev, "Could not add irqchip (%d)\n", err);
- goto err_gpiochip_irqchip_add;
+ goto err_gpiochip_remove;
}
err = request_irq(irq, idi_48_irq_handler, IRQF_SHARED, name,
idi48gpio);
if (err) {
dev_err(dev, "IRQ handler registering failed (%d)\n", err);
- goto err_request_irq;
+ goto err_gpiochip_remove;
}
return 0;
-err_request_irq:
-err_gpiochip_irqchip_add:
+err_gpiochip_remove:
gpiochip_remove(&idi48gpio->chip);
-err_gpio_register:
- release_region(base, extent);
-err_lock_io_port:
return err;
}
@@ -291,7 +283,6 @@ static int idi_48_remove(struct platform_device *pdev)
free_irq(idi48gpio->irq, idi48gpio);
gpiochip_remove(&idi48gpio->chip);
- release_region(idi48gpio->base, idi48gpio->extent);
return 0;
}
--
2.4.10
Powered by blists - more mailing lists