| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160203202926.GE3327@lukather>
Date: Wed, 3 Feb 2016 21:29:26 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Chen-Yu Tsai <wens@...e.org>
Cc: Mike Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
David Airlie <airlied@...ux.ie>,
Thierry Reding <thierry.reding@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
devicetree <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-clk <linux-clk@...r.kernel.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
linux-sunxi <linux-sunxi@...glegroups.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Hans de Goede <hdegoede@...hat.com>,
Alexander Kaplan <alex@...tthing.co>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Wynter Woods <wynter@...tthing.co>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Rob Clark <robdclark@...il.com>,
Daniel Vetter <daniel@...ll.ch>
Subject: Re: [PATCH v2 07/26] clk: sunxi: Add TCON channel1 clock
Hi,
On Sun, Jan 17, 2016 at 12:36:20AM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Thu, Jan 14, 2016 at 11:24 PM, Maxime Ripard
> <maxime.ripard@...e-electrons.com> wrote:
> > The TCON is a controller generating the timings to output videos signals,
> > acting like both a CRTC and an encoder.
> >
> > It has two channels depending on the output, each channel being driven by
> > its own clock (and own clock controller).
> >
> > Add a driver for the channel 1 clock.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
> > ---
> > Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
> > drivers/clk/sunxi/Makefile | 1 +
> > drivers/clk/sunxi/clk-sun4i-tcon-ch1.c | 154 ++++++++++++++++++++++
> > 3 files changed, 156 insertions(+)
> > create mode 100644 drivers/clk/sunxi/clk-sun4i-tcon-ch1.c
> >
> > diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> > index bb9fb78dcff8..fe34fc56e803 100644
> > --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> > +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> > @@ -67,6 +67,7 @@ Required properties:
> > "allwinner,sun7i-a20-out-clk" - for the external output clocks
> > "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
> > "allwinner,sun4i-a10-tcon-ch0-clk" - for the TCON channel 0 clock on the A10
> > + "allwinner,sun4i-a10-tcon-ch1-clk" - for the TCON channel 1 clock on the A10
> > "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
> > "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
> > "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
> > diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
> > index 40c32ffd912c..0a20873cd103 100644
> > --- a/drivers/clk/sunxi/Makefile
> > +++ b/drivers/clk/sunxi/Makefile
> > @@ -12,6 +12,7 @@ obj-y += clk-mod0.o
> > obj-y += clk-simple-gates.o
> > obj-y += clk-sun4i-display.o
> > obj-y += clk-sun4i-pll3.o
> > +obj-y += clk-sun4i-tcon-ch1.o
> > obj-y += clk-sun8i-mbus.o
> > obj-y += clk-sun9i-core.o
> > obj-y += clk-sun9i-mmc.o
> > diff --git a/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c b/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c
> > new file mode 100644
> > index 000000000000..51ddc38821f7
> > --- /dev/null
> > +++ b/drivers/clk/sunxi/clk-sun4i-tcon-ch1.c
> > @@ -0,0 +1,154 @@
> > +/*
> > + * Copyright 2015 Maxime Ripard
> > + *
> > + * Maxime Ripard <maxime.ripard@...e-electrons.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/slab.h>
> > +#include <linux/spinlock.h>
> > +
> > +#define SUN4I_TCON_CH1_SCLK_NAME_LEN 32
> > +
> > +#define SUN4I_A10_TCON_CH1_SCLK2_PARENTS 4
> > +
> > +#define SUN4I_A10_TCON_CH1_SCLK2_GATE_BIT 31
> > +#define SUN4I_A10_TCON_CH1_SCLK2_MUX_MASK 3
> > +#define SUN4I_A10_TCON_CH1_SCLK2_MUX_SHIFT 24
> > +#define SUN4I_A10_TCON_CH1_SCLK2_DIV_WIDTH 4
> > +#define SUN4I_A10_TCON_CH1_SCLK2_DIV_SHIFT 0
> > +
> > +#define SUN4I_A10_TCON_CH1_SCLK1_GATE_BIT 15
> > +#define SUN4I_A10_TCON_CH1_SCLK1_DIV_WIDTH 1
> > +#define SUN4I_A10_TCON_CH1_SCLK1_DIV_SHIFT 11
> > +
> > +static DEFINE_SPINLOCK(sun4i_a10_tcon_ch1_lock);
> > +
> > +static void __init sun4i_a10_tcon_ch1_setup(struct device_node *node)
> > +{
> > + const char *sclk2_parents[SUN4I_A10_TCON_CH1_SCLK2_PARENTS];
> > + const char *sclk1_name = node->name;
> > + const char *sclk2_name;
> > + struct clk_divider *sclk1_div, *sclk2_div;
> > + struct clk_gate *sclk1_gate, *sclk2_gate;
> > + struct clk_mux *sclk2_mux;
> > + struct clk *sclk1, *sclk2;
> > + void __iomem *reg;
> > + int i, ret;
> > +
> > + of_property_read_string(node, "clock-output-names",
> > + &sclk1_name);
> > +
> > + sclk2_name = kasprintf(GFP_KERNEL, "%s2", sclk1_name);
> > + if (!sclk2_name)
> > + return;
> > +
> > + reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> > + if (IS_ERR(reg)) {
> > + pr_err("%s: Could not map the clock registers\n", sclk2_name);
> > + return;
> > + }
> > +
> > + for (i = 0; i < SUN4I_A10_TCON_CH1_SCLK2_PARENTS; i++)
> > + sclk2_parents[i] = of_clk_get_parent_name(node, i);
>
> of_clk_parent_fill?
Indeed
>
> > +
> > + sclk2_mux = kzalloc(sizeof(*sclk2_mux), GFP_KERNEL);
> > + if (!sclk2_mux)
> > + return;
> > +
> > + sclk2_mux->reg = reg;
> > + sclk2_mux->shift = SUN4I_A10_TCON_CH1_SCLK2_MUX_SHIFT;
> > + sclk2_mux->mask = SUN4I_A10_TCON_CH1_SCLK2_MUX_MASK;
> > + sclk2_mux->lock = &sun4i_a10_tcon_ch1_lock;
> > +
> > + sclk2_gate = kzalloc(sizeof(*sclk2_gate), GFP_KERNEL);
> > + if (!sclk2_gate)
> > + goto free_sclk2_mux;
> > +
> > + sclk2_gate->reg = reg;
> > + sclk2_gate->bit_idx = SUN4I_A10_TCON_CH1_SCLK2_GATE_BIT;
> > + sclk2_gate->lock = &sun4i_a10_tcon_ch1_lock;
> > +
> > + sclk2_div = kzalloc(sizeof(*sclk2_div), GFP_KERNEL);
> > + if (!sclk2_div)
> > + goto free_sclk2_gate;
> > +
> > + sclk2_div->reg = reg;
> > + sclk2_div->shift = SUN4I_A10_TCON_CH1_SCLK2_DIV_SHIFT;
> > + sclk2_div->width = SUN4I_A10_TCON_CH1_SCLK2_DIV_WIDTH;
> > + sclk2_div->lock = &sun4i_a10_tcon_ch1_lock;
> > +
> > + sclk2 = clk_register_composite(NULL, sclk2_name, sclk2_parents,
> > + SUN4I_A10_TCON_CH1_SCLK2_PARENTS,
> > + &sclk2_mux->hw, &clk_mux_ops, &
>
> > + sclk2_div->hw, &clk_divider_ops,
>
> Placement of the "&" is very weird.
Hmm, right. I don't know what happened here, but it's obviously wrong :)
>
> > + &sclk2_gate->hw, &clk_gate_ops,
> > + 0);
> > + if (IS_ERR(sclk2)) {
> > + pr_err("%s: Couldn't register the clock\n", sclk2_name);
> > + goto free_sclk2_div;
> > + }
> > +
> > + sclk1_div = kzalloc(sizeof(*sclk1_div), GFP_KERNEL);
> > + if (!sclk1_div)
> > + goto free_sclk2;
> > +
> > + sclk1_div->reg = reg;
> > + sclk1_div->shift = SUN4I_A10_TCON_CH1_SCLK1_DIV_SHIFT;
> > + sclk1_div->width = SUN4I_A10_TCON_CH1_SCLK1_DIV_WIDTH;
> > + sclk1_div->lock = &sun4i_a10_tcon_ch1_lock;
> > +
> > + sclk1_gate = kzalloc(sizeof(*sclk1_gate), GFP_KERNEL);
> > + if (!sclk1_gate)
> > + goto free_sclk1_mux;
> > +
> > + sclk1_gate->reg = reg;
> > + sclk1_gate->bit_idx = SUN4I_A10_TCON_CH1_SCLK1_GATE_BIT;
> > + sclk1_gate->lock = &sun4i_a10_tcon_ch1_lock;
> > +
> > + sclk1 = clk_register_composite(NULL, sclk1_name, &sclk2_name, 1,
> > + NULL, NULL,
> > + &sclk1_div->hw, &clk_divider_ops,
> > + &sclk1_gate->hw, &clk_gate_ops,
> > + 0);
> > + if (IS_ERR(sclk1)) {
> > + pr_err("%s: Couldn't register the clock\n", sclk1_name);
> > + goto free_sclk1_gate;
> > + }
> > +
> > + ret = of_clk_add_provider(node, of_clk_src_simple_get, sclk1);
> > + if (WARN_ON(ret))
> > + goto free_sclk1;
> > +
> > + return;
> > +
> > +free_sclk1:
> > + clk_unregister_composite(sclk1);
> > +free_sclk1_gate:
> > + kfree(sclk1_gate);
> > +free_sclk1_mux:
> > + kfree(sclk1_div);
> > +free_sclk2:
> > + clk_unregister(sclk2);
> > +free_sclk2_div:
> > + kfree(sclk2_div);
> > +free_sclk2_gate:
> > + kfree(sclk2_gate);
> > +free_sclk2_mux:
> > + kfree(sclk2_mux);
>
> Cleanup after of_io_request_and_map?
Indeed.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists