linux-kernel - [PATCH 7/8] ARM: dts: rockchip: enable the tsadc for rk3228 evb

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1454472767-5767-8-git-send-email-wxt@rock-chips.com>
Date:	Wed,  3 Feb 2016 12:12:46 +0800
From:	Caesar Wang <wxt@...k-chips.com>
To:	Heiko Stuebner <heiko@...ech.de>, edubezval@...il.com
Cc:	huangtao@...k-chips.com, linux-rockchip@...ts.infradead.org,
	zhangqing@...k-chips.com,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Caesar Wang <wxt@...k-chips.com>,
	Russell King <linux@....linux.org.uk>,
	devicetree@...r.kernel.org, Kumar Gala <galak@...eaurora.org>,
	linux-kernel@...r.kernel.org,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 7/8] ARM: dts: rockchip: enable the tsadc for rk3228 evb

This patch enables the tsadc for rk3228 evb board.

The rk3228 evb board uses the CRU to reset the chip since it hasn't the
PMIC to connect it, and TSHUT is low active on evb board.

Signed-off-by: Caesar Wang <wxt@...k-chips.com>
---

 arch/arm/boot/dts/rk3228-evb.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index e3898b8..c75cc41 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -61,6 +61,13 @@
 	status = "okay";
 };
 
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
 &uart2 {
 	status = "okay";
 };
-- 
1.9.1