| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <tip-3b97629d139b19cbcd15b0b3c128a4d6587d2091@git.kernel.org>
Date: Wed, 3 Feb 2016 02:10:12 -0800
From: tip-bot for Taeung Song <tipbot@...or.com>
To: linux-tip-commits@...r.kernel.org
Cc: treeze.taeung@...il.com, namhyung@...nel.org, tglx@...utronix.de,
acme@...hat.com, linux-kernel@...r.kernel.org, mingo@...nel.org,
jolsa@...nel.org, hpa@...or.com
Subject: [tip:perf/core] perf config: Document variables for 'annotate'
section in man page
Commit-ID: 3b97629d139b19cbcd15b0b3c128a4d6587d2091
Gitweb: http://git.kernel.org/tip/3b97629d139b19cbcd15b0b3c128a4d6587d2091
Author: Taeung Song <treeze.taeung@...il.com>
AuthorDate: Fri, 8 Jan 2016 20:39:34 +0900
Committer: Arnaldo Carvalho de Melo <acme@...hat.com>
CommitDate: Tue, 26 Jan 2016 11:52:48 -0300
perf config: Document variables for 'annotate' section in man page
Explain 'annotate' section and its variables.
'hide_src_code', 'use_offset', 'jump_arrows',
'show_linenr', 'show_nr_jump' and 'show_total_period'.
Signed-off-by: Taeung Song <treeze.taeung@...il.com>
Cc: Jiri Olsa <jolsa@...nel.org>
Cc: Namhyung Kim <namhyung@...nel.org>
Link: http://lkml.kernel.org/r/1452253193-30502-5-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@...hat.com>
---
tools/perf/Documentation/perf-config.txt | 110 +++++++++++++++++++++++++++++++
1 file changed, 110 insertions(+)
diff --git a/tools/perf/Documentation/perf-config.txt b/tools/perf/Documentation/perf-config.txt
index a095f0c..cb7ca50 100644
--- a/tools/perf/Documentation/perf-config.txt
+++ b/tools/perf/Documentation/perf-config.txt
@@ -169,6 +169,116 @@ buildid.*::
cache location, or to disable it altogether. If you want to disable it,
set buildid.dir to /dev/null. The default is $HOME/.debug
+annotate.*::
+ These options work only for TUI.
+ These are in control of addresses, jump function, source code
+ in lines of assembly code from a specific program.
+
+ annotate.hide_src_code::
+ If a program which is analyzed has source code,
+ this option lets 'annotate' print a list of assembly code with the source code.
+ For example, let's see a part of a program. There're four lines.
+ If this option is 'true', they can be printed
+ without source code from a program as below.
+
+ │ push %rbp
+ │ mov %rsp,%rbp
+ │ sub $0x10,%rsp
+ │ mov (%rdi),%rdx
+
+ But if this option is 'false', source code of the part
+ can be also printed as below. Default is 'false'.
+
+ │ struct rb_node *rb_next(const struct rb_node *node)
+ │ {
+ │ push %rbp
+ │ mov %rsp,%rbp
+ │ sub $0x10,%rsp
+ │ struct rb_node *parent;
+ │
+ │ if (RB_EMPTY_NODE(node))
+ │ mov (%rdi),%rdx
+ │ return n;
+
+ annotate.use_offset::
+ Basing on a first address of a loaded function, offset can be used.
+ Instead of using original addresses of assembly code,
+ addresses subtracted from a base address can be printed.
+ Let's illustrate an example.
+ If a base address is 0XFFFFFFFF81624d50 as below,
+
+ ffffffff81624d50 <load0>
+
+ an address on assembly code has a specific absolute address as below
+
+ ffffffff816250b8:│ mov 0x8(%r14),%rdi
+
+ but if use_offset is 'true', an address subtracted from a base address is printed.
+ Default is true. This option is only applied to TUI.
+
+ 368:│ mov 0x8(%r14),%rdi
+
+ annotate.jump_arrows::
+ There can be jump instruction among assembly code.
+ Depending on a boolean value of jump_arrows,
+ arrows can be printed or not which represent
+ where do the instruction jump into as below.
+
+ │ ┌──jmp 1333
+ │ │ xchg %ax,%ax
+ │1330:│ mov %r15,%r10
+ │1333:└─→cmp %r15,%r14
+
+ If jump_arrow is 'false', the arrows isn't printed as below.
+ Default is 'false'.
+
+ │ ↓ jmp 1333
+ │ xchg %ax,%ax
+ │1330: mov %r15,%r10
+ │1333: cmp %r15,%r14
+
+ annotate.show_linenr::
+ When showing source code if this option is 'true',
+ line numbers are printed as below.
+
+ │1628 if (type & PERF_SAMPLE_IDENTIFIER) {
+ │ ↓ jne 508
+ │1628 data->id = *array;
+ │1629 array++;
+ │1630 }
+
+ However if this option is 'false', they aren't printed as below.
+ Default is 'false'.
+
+ │ if (type & PERF_SAMPLE_IDENTIFIER) {
+ │ ↓ jne 508
+ │ data->id = *array;
+ │ array++;
+ │ }
+
+ annotate.show_nr_jumps::
+ Let's see a part of assembly code.
+
+ │1382: movb $0x1,-0x270(%rbp)
+
+ If use this, the number of branches jumping to that address can be printed as below.
+ Default is 'false'.
+
+ │1 1382: movb $0x1,-0x270(%rbp)
+
+ annotate.show_total_period::
+ To compare two records on an instruction base, with this option
+ provided, display total number of samples that belong to a line
+ in assembly code. If this option is 'true', total periods are printed
+ instead of percent values as below.
+
+ 302 │ mov %eax,%eax
+
+ But if this option is 'false', percent values for overhead are printed i.e.
+ Default is 'false'.
+
+ 99.93 │ mov %eax,%eax
+
SEE ALSO
--------
linkperf:perf[1]
Powered by blists - more mailing lists