linux-kernel - [PATCH v2 1/2] drm/fsl-dcu: fix register initialization

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1454461578-8649-1-git-send-email-stefan@agner.ch>
Date:	Tue,  2 Feb 2016 17:06:17 -0800
From:	Stefan Agner <stefan@...er.ch>
To:	dri-devel@...ts.freedesktop.org
Cc:	stefan@...er.ch, airlied@...ux.ie, daniel.vetter@...ll.ch,
	jianwei.wang.chn@...il.com, alison.wang@...escale.com,
	meng.yi@....com, linux-kernel@...r.kernel.org
Subject: [PATCH v2 1/2] drm/fsl-dcu: fix register initialization

The layer enumeration start with 0 (0-15 for LS1021a and 0-63 for
Vybrid) whereas the register enumeration start from 1 (1-10 for
LS1021a and 1-9 for Vybrid). The loop started off from 0 for both
iterations and initialized the number of layers inclusive, which
is one layer too many.

All extensively written registers seem to be unassigned, it seems
that the write to those registers did not do any harm in practice.

Signed-off-by: Stefan Agner <stefan@...er.ch>
---
This two patches apply cleanly on top of my earlier DCU fixes                    
patchset:                                                                        
https://lkml.org/lkml/2015/11/18/953

Changes since v1:
- (none)

 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
index db69725..3c92889 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
@@ -169,8 +169,8 @@ int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev)
 		reg_num = LS1021A_LAYER_REG_NUM;
 	else
 		reg_num = VF610_LAYER_REG_NUM;
-	for (i = 0; i <= fsl_dev->soc->total_layer; i++) {
-		for (j = 0; j < reg_num; j++)
+	for (i = 0; i < fsl_dev->soc->total_layer; i++) {
+		for (j = 1; j <= reg_num; j++)
 			regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(i, j), 0);
 	}
 	regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
-- 
2.7.0