[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1454505500-30384-1-git-send-email-mans@mansr.com>
Date: Wed, 3 Feb 2016 13:18:20 +0000
From: Mans Rullgard <mans@...sr.com>
To: Mark Brown <broonie@...nel.org>
Cc: Liam Girdwood <lgirdwood@...il.com>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, alsa-devel@...a-project.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] ASoC: mxs-saif: check BUSY bit in hw_params() only if not mclk_in_use
If something else, typically a codec, has enabled mclk, the BUSY
bit may be set when hw_params() is called without this being an
error. This check thus causes intermittent failures to configure
the sound device when used in such a manner. Fix this by making
the test conditional on !saif->mclk_in_use.
Signed-off-by: Mans Rullgard <mans@...sr.com>
---
sound/soc/mxs/mxs-saif.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index a6c7b8d87cd2..13631003cb7c 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -418,7 +418,7 @@ static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
}
stat = __raw_readl(saif->base + SAIF_STAT);
- if (stat & BM_SAIF_STAT_BUSY) {
+ if (!saif->mclk_in_use && (stat & BM_SAIF_STAT_BUSY)) {
dev_err(cpu_dai->dev, "error: busy\n");
return -EBUSY;
}
--
2.7.0
Powered by blists - more mailing lists