linux-kernel - [PATCH v2 1/4] ARM: at91: pm: create a separate procedure for the ULP0 mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1454571471-4434-2-git-send-email-wenyou.yang@atmel.com>
Date:	Thu, 4 Feb 2016 15:37:48 +0800
From:	Wenyou Yang <wenyou.yang@...el.com>
To:	Nicolas Ferre <nicolas.ferre@...el.com>,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	Russell King <linux@....linux.org.uk>
CC:	<linux-clk@...r.kernel.org>, Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Brown <broonie@...nel.org>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
	Wenyou Yang <wenyou.yang@...el.com>
Subject: [PATCH v2 1/4] ARM: at91: pm: create a separate procedure for the ULP0 mode

To make the code more legible and prepare to add the ULP1 mode
support in the future, create a separate procedure for the ULP0 mode.

Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
---

Changes in v2: None

 arch/arm/mach-at91/pm_suspend.S |   65 ++++++++++++++++++++++++---------------
 1 file changed, 40 insertions(+), 25 deletions(-)

diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index a25defd..5fcffdc 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -107,7 +107,7 @@ ENTRY(at91_pm_suspend_in_sram)
 
 	ldr	r0, .pm_mode
 	tst	r0, #AT91_PM_SLOW_CLOCK
-	beq	skip_disable_main_clock
+	beq	standby_mode
 
 	ldr	pmc, .pmc_base
 
@@ -131,32 +131,13 @@ ENTRY(at91_pm_suspend_in_sram)
 	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
 
-	/* Turn off the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
-	orr	tmp1, tmp1, #AT91_PMC_KEY
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
-
-skip_disable_main_clock:
-	ldr	pmc, .pmc_base
-
-	/* Wait for interrupt */
-	at91_cpu_idle
-
-	ldr	r0, .pm_mode
-	tst	r0, #AT91_PM_SLOW_CLOCK
-	beq	skip_enable_main_clock
+ulp0_mode:
+	bl	at91_pm_ulp0_mode
+	b	ulp_exit
 
+ulp_exit:
 	ldr	pmc, .pmc_base
 
-	/* Turn on the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
-	orr	tmp1, tmp1, #AT91_PMC_KEY
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
-
-	wait_moscrdy
-
 	/* Restore PLLA setting */
 	ldr	tmp1, .saved_pllar
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
@@ -177,7 +158,15 @@ skip_disable_main_clock:
 
 	wait_mckrdy
 
-skip_enable_main_clock:
+	b	pm_exit
+
+standby_mode:
+	ldr	pmc, .pmc_base
+
+	/* Wait for interrupt */
+	at91_cpu_idle
+
+pm_exit:
 	/* Exit the self-refresh mode */
 	mov	r0, #SRAMC_SELF_FRESH_EXIT
 	bl	at91_sramc_self_refresh
@@ -311,6 +300,32 @@ exit_sramc_sf:
 	mov	pc, lr
 ENDPROC(at91_sramc_self_refresh)
 
+/*
+ * void at91_pm_ulp0_mode(void)
+ */
+ENTRY(at91_pm_ulp0_mode)
+	ldr	pmc, .pmc_base
+
+	/* Turn off the crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Wait for interrupt */
+	at91_cpu_idle
+
+	/* Turn on the crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscrdy
+
+	mov	pc, lr
+ENDPROC(at91_pm_ulp0_mode)
+
 .pmc_base:
 	.word 0
 .sramc_base:
-- 
1.7.9.5