| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1454593456-3162-12-git-send-email-b.zolnierkie@samsung.com>
Date: Thu, 04 Feb 2016 14:44:08 +0100
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org,
Tejun Heo <tj@...nel.org>,
Alan Cox <gnomes@...rguk.ukuu.org.uk>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
b.zolnierkie@...sung.com
Subject: [RFC PATCH 11/19] ide: remove deprecated opti621 host driver
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.
The replacement driver (pata_opti) has been available since
2006 and it supports all the hardware supported by the old
opti621 host driver.
Remove the deprecated opti621 host driver.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
drivers/ide/Kconfig | 7 --
drivers/ide/Makefile | 1 -
drivers/ide/opti621.c | 178 --------------------------------------------------
3 files changed, 186 deletions(-)
delete mode 100644 drivers/ide/opti621.c
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 2458a1f..2341097 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -314,13 +314,6 @@ config BLK_DEV_GENERIC
This option provides generic support for various PCI IDE Chipsets
which otherwise might not be supported.
-config BLK_DEV_OPTI621
- tristate "OPTi 82C621 chipset enhanced support"
- select BLK_DEV_IDEPCI
- help
- This is a driver for the OPTi 82C621 EIDE controller.
- Please read the comments at the top of <file:drivers/ide/opti621.c>.
-
config BLK_DEV_RZ1000
tristate "RZ1000 chipset bugfix/support"
depends on X86
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 90b64de..9a69b97 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o
obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o
obj-$(CONFIG_BLK_DEV_IT8172) += it8172.o
obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o
-obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o
obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o
obj-$(CONFIG_BLK_DEV_PDC202XX_NEW) += pdc202xx_new.o
obj-$(CONFIG_BLK_DEV_PIIX) += piix.o
diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c
deleted file mode 100644
index 26a4500..0000000
--- a/drivers/ide/opti621.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
- */
-
-/*
- * Authors:
- * Jaromir Koutek <miri@...knet.cz>,
- * Jan Harkes <jaharkes@....nl>,
- * Mark Lord <mlord@...ox.com>
- * Some parts of code are from ali14xx.c and from rz1000.c.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "opti621"
-
-#define READ_REG 0 /* index of Read cycle timing register */
-#define WRITE_REG 1 /* index of Write cycle timing register */
-#define CNTRL_REG 3 /* index of Control register */
-#define STRAP_REG 5 /* index of Strap register */
-#define MISC_REG 6 /* index of Miscellaneous register */
-
-static int reg_base;
-
-static DEFINE_SPINLOCK(opti621_lock);
-
-/* Write value to register reg, base of register
- * is at reg_base (0x1f0 primary, 0x170 secondary,
- * if not changed by PCI configuration).
- * This is from setupvic.exe program.
- */
-static void write_reg(u8 value, int reg)
-{
- inw(reg_base + 1);
- inw(reg_base + 1);
- outb(3, reg_base + 2);
- outb(value, reg_base + reg);
- outb(0x83, reg_base + 2);
-}
-
-/* Read value from register reg, base of register
- * is at reg_base (0x1f0 primary, 0x170 secondary,
- * if not changed by PCI configuration).
- * This is from setupvic.exe program.
- */
-static u8 read_reg(int reg)
-{
- u8 ret = 0;
-
- inw(reg_base + 1);
- inw(reg_base + 1);
- outb(3, reg_base + 2);
- ret = inb(reg_base + reg);
- outb(0x83, reg_base + 2);
-
- return ret;
-}
-
-static void opti621_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- ide_drive_t *pair = ide_get_pair_dev(drive);
- unsigned long flags;
- unsigned long mode = drive->pio_mode, pair_mode;
- const u8 pio = mode - XFER_PIO_0;
- u8 tim, misc, addr_pio = pio, clk;
-
- /* DRDY is default 2 (by OPTi Databook) */
- static const u8 addr_timings[2][5] = {
- { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */
- { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */
- };
- static const u8 data_rec_timings[2][5] = {
- { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */
- { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */
- };
-
- ide_set_drivedata(drive, (void *)mode);
-
- if (pair) {
- pair_mode = (unsigned long)ide_get_drivedata(pair);
- if (pair_mode && pair_mode < mode)
- addr_pio = pair_mode - XFER_PIO_0;
- }
-
- spin_lock_irqsave(&opti621_lock, flags);
-
- reg_base = hwif->io_ports.data_addr;
-
- /* allow Register-B */
- outb(0xc0, reg_base + CNTRL_REG);
- /* hmm, setupvic.exe does this ;-) */
- outb(0xff, reg_base + 5);
- /* if reads 0xff, adapter not exist? */
- (void)inb(reg_base + CNTRL_REG);
- /* if reads 0xc0, no interface exist? */
- read_reg(CNTRL_REG);
-
- /* check CLK speed */
- clk = read_reg(STRAP_REG) & 1;
-
- printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33);
-
- tim = data_rec_timings[clk][pio];
- misc = addr_timings[clk][addr_pio];
-
- /* select Index-0/1 for Register-A/B */
- write_reg(drive->dn & 1, MISC_REG);
- /* set read cycle timings */
- write_reg(tim, READ_REG);
- /* set write cycle timings */
- write_reg(tim, WRITE_REG);
-
- /* use Register-A for drive 0 */
- /* use Register-B for drive 1 */
- write_reg(0x85, CNTRL_REG);
-
- /* set address setup, DRDY timings, */
- /* and read prefetch for both drives */
- write_reg(misc, MISC_REG);
-
- spin_unlock_irqrestore(&opti621_lock, flags);
-}
-
-static const struct ide_port_ops opti621_port_ops = {
- .set_pio_mode = opti621_set_pio_mode,
-};
-
-static const struct ide_port_info opti621_chipset = {
- .name = DRV_NAME,
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO4,
-};
-
-static int opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &opti621_chipset, NULL);
-}
-
-static const struct pci_device_id opti621_pci_tbl[] = {
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);
-
-static struct pci_driver opti621_pci_driver = {
- .name = "Opti621_IDE",
- .id_table = opti621_pci_tbl,
- .probe = opti621_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init opti621_ide_init(void)
-{
- return ide_pci_register_driver(&opti621_pci_driver);
-}
-
-static void __exit opti621_ide_exit(void)
-{
- pci_unregister_driver(&opti621_pci_driver);
-}
-
-module_init(opti621_ide_init);
-module_exit(opti621_ide_exit);
-
-MODULE_AUTHOR("Jaromir Koutek, Jan Harkes, Mark Lord");
-MODULE_DESCRIPTION("PCI driver module for Opti621 IDE");
-MODULE_LICENSE("GPL");
--
1.9.1
Powered by blists - more mailing lists