| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1454608890-22938-2-git-send-email-m.othacehe@gmail.com>
Date: Thu, 4 Feb 2016 19:01:27 +0100
From: Mathieu OTHACEHE <m.othacehe@...il.com>
To: johan@...nel.org, gregkh@...uxfoundation.org
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
Mathieu OTHACEHE <m.othacehe@...il.com>
Subject: [PATCH v2 1/4] USB: serial: fix compare_const_fl.cocci warnings
Move constants to the right of binary operators.
Generated by: scripts/coccinelle/misc/compare_const_fl.cocci
Signed-off-by: Mathieu OTHACEHE <m.othacehe@...il.com>
---
Move constants to the right improve readability in my opinion.
But it's a matter of taste, and nothing is specified in CodingStyle.
drivers/usb/serial/ch341.c | 2 +-
drivers/usb/serial/f81232.c | 2 +-
drivers/usb/serial/ftdi_sio.c | 16 +++++++-------
drivers/usb/serial/ftdi_sio.h | 8 +++----
drivers/usb/serial/garmin_gps.c | 48 ++++++++++++++++++++---------------------
drivers/usb/serial/mos7840.c | 4 ++--
6 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index c73808f..f139488 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -370,7 +370,7 @@ static void ch341_set_termios(struct tty_struct *tty,
static void ch341_break_ctl(struct tty_struct *tty, int break_state)
{
const uint16_t ch341_break_reg =
- CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
+ ((uint16_t) CH341_REG_BREAK2 << 8) | CH341_REG_BREAK1;
struct usb_serial_port *port = tty->driver_data;
int r;
uint16_t reg_contents;
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 972f5a5..589d856 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -190,7 +190,7 @@ static int f81232_set_mctrl(struct usb_serial_port *port,
/* force enable interrupt with OUT2 */
mutex_lock(&priv->lock);
- val = UART_MCR_OUT2 | priv->modem_control;
+ val = priv->modem_control | UART_MCR_OUT2;
if (clear & TIOCM_DTR)
val &= ~UART_MCR_DTR;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8c660ae..07b0040 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1320,11 +1320,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
if (baud <= 3000000) {
__u16 product_id = le16_to_cpu(
port->serial->dev->descriptor.idProduct);
- if (((FTDI_NDI_HUC_PID == product_id) ||
- (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
- (FTDI_NDI_FUTURE_2_PID == product_id) ||
- (FTDI_NDI_FUTURE_3_PID == product_id) ||
- (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+ if (((product_id == FTDI_NDI_HUC_PID) ||
+ (product_id == FTDI_NDI_SPECTRA_SCU_PID) ||
+ (product_id == FTDI_NDI_FUTURE_2_PID) ||
+ (product_id == FTDI_NDI_FUTURE_3_PID) ||
+ (product_id == FTDI_NDI_AURORA_SCU_PID)) &&
(baud == 19200)) {
baud = 1200000;
}
@@ -2325,7 +2325,7 @@ no_c_cflag_changes:
usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
+ 0, (priv->interface | FTDI_SIO_RTS_CTS_HS),
NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(ddev, "urb failed to set to rts/cts flow control\n");
}
@@ -2354,8 +2354,8 @@ no_c_cflag_changes:
usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- urb_value , (FTDI_SIO_XON_XOFF_HS
- | priv->interface),
+ urb_value, (priv->interface |
+ FTDI_SIO_XON_XOFF_HS),
NULL, 0, WDR_TIMEOUT) < 0) {
dev_err(&port->dev, "urb failed to set to "
"xon/xoff flow control\n");
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index ed58c6f..bbcc13df 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -239,11 +239,11 @@ enum ftdi_sio_baudrate {
*/
#define FTDI_SIO_SET_DTR_MASK 0x1
-#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8))
-#define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8))
+#define FTDI_SIO_SET_DTR_HIGH ((FTDI_SIO_SET_DTR_MASK << 8) | 1)
+#define FTDI_SIO_SET_DTR_LOW ((FTDI_SIO_SET_DTR_MASK << 8) | 0)
#define FTDI_SIO_SET_RTS_MASK 0x2
-#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8))
-#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8))
+#define FTDI_SIO_SET_RTS_HIGH ((FTDI_SIO_SET_RTS_MASK << 8) | 2)
+#define FTDI_SIO_SET_RTS_LOW ((FTDI_SIO_SET_RTS_MASK << 8) | 0)
/*
* ControlValue
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index db591d1..c0bbe44 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -237,10 +237,10 @@ static inline int getDataLength(const __u8 *usbPacket)
*/
static inline int isAbortTrfCmnd(const unsigned char *buf)
{
- if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
- sizeof(GARMIN_STOP_TRANSFER_REQ)) ||
- 0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
- sizeof(GARMIN_STOP_TRANSFER_REQ_V2)))
+ if (memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
+ sizeof(GARMIN_STOP_TRANSFER_REQ)) == 0 ||
+ memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
+ sizeof(GARMIN_STOP_TRANSFER_REQ_V2)) == 0)
return 1;
else
return 0;
@@ -350,7 +350,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
unsigned l = 0;
dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__,
- 0xFF & pkt_id);
+ pkt_id & 0xFF);
*ptr++ = DLE;
*ptr++ = ACK;
@@ -366,7 +366,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
*ptr++ = DLE;
*ptr++ = 0;
- *ptr++ = 0xFF & (-cksum);
+ *ptr++ = (-cksum) & 0xFF;
*ptr++ = DLE;
*ptr++ = ETX;
@@ -423,9 +423,9 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
n++;
}
- if ((0xff & (cksum + *recpkt)) != 0) {
+ if (((cksum + *recpkt) & 0xff) != 0) {
dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n",
- __func__, 0xff & -cksum, 0xff & *recpkt);
+ __func__, -cksum & 0xff, *recpkt & 0xff);
return -EINVPKT;
}
@@ -528,7 +528,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
dev_dbg(dev, "NAK packet complete.\n");
} else {
dev_dbg(dev, "packet complete - id=0x%X.\n",
- 0xFF & data);
+ data & 0xFF);
gsp_rec_packet(garmin_data_p, size);
}
@@ -636,7 +636,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
garmin_data_p->outsize = 0;
- if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) {
+ if (getLayerId(garmin_data_p->outbuffer) != GARMIN_LAYERID_APPL) {
dev_dbg(dev, "not an application packet (%d)\n",
getLayerId(garmin_data_p->outbuffer));
return -1;
@@ -688,7 +688,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
*dst++ = DLE;
}
- cksum = 0xFF & -cksum;
+ cksum = -cksum & 0xFF;
*dst++ = cksum;
if (cksum == DLE)
*dst++ = DLE;
@@ -970,7 +970,7 @@ static void garmin_write_bulk_callback(struct urb *urb)
struct garmin_data *garmin_data_p =
usb_get_serial_port_data(port);
- if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) {
+ if (getLayerId(urb->transfer_buffer) == GARMIN_LAYERID_APPL) {
if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
gsp_send_ack(garmin_data_p,
@@ -1025,7 +1025,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
dismiss_ack ? NULL : port);
urb->transfer_flags |= URB_ZERO_PACKET;
- if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
+ if (getLayerId(buffer) == GARMIN_LAYERID_APPL) {
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= APP_REQ_SEEN;
@@ -1077,9 +1077,9 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
pktsiz = getDataLength(garmin_data_p->privpkt);
pktid = getPacketId(garmin_data_p->privpkt);
- if (count == (GARMIN_PKTHDR_LENGTH+pktsiz)
- && GARMIN_LAYERID_PRIVATE ==
- getLayerId(garmin_data_p->privpkt)) {
+ if ((GARMIN_PKTHDR_LENGTH+pktsiz) == count &&
+ getLayerId(garmin_data_p->privpkt) ==
+ GARMIN_LAYERID_PRIVATE) {
dev_dbg(dev, "%s - processing private request %d\n",
__func__, pktid);
@@ -1192,7 +1192,7 @@ static void garmin_read_bulk_callback(struct urb *urb)
garmin_read_process(garmin_data_p, data, urb->actual_length, 1);
if (urb->actual_length == 0 &&
- 0 != (garmin_data_p->flags & FLAGS_BULK_IN_RESTART)) {
+ (garmin_data_p->flags & FLAGS_BULK_IN_RESTART) != 0) {
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
@@ -1203,7 +1203,7 @@ static void garmin_read_bulk_callback(struct urb *urb)
__func__, retval);
} else if (urb->actual_length > 0) {
/* Continue trying to read until nothing more is received */
- if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) {
+ if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) {
retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (retval)
dev_err(&port->dev,
@@ -1249,12 +1249,12 @@ static void garmin_read_int_callback(struct urb *urb)
urb->transfer_buffer);
if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) &&
- 0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
- sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) {
+ memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
+ sizeof(GARMIN_BULK_IN_AVAIL_REPLY)) == 0) {
dev_dbg(&port->dev, "%s - bulk data available.\n", __func__);
- if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+ if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) == 0) {
/* bulk data available */
retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
@@ -1276,8 +1276,8 @@ static void garmin_read_int_callback(struct urb *urb)
}
} else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY))
- && 0 == memcmp(data, GARMIN_START_SESSION_REPLY,
- sizeof(GARMIN_START_SESSION_REPLY))) {
+ && memcmp(data, GARMIN_START_SESSION_REPLY,
+ sizeof(GARMIN_START_SESSION_REPLY)) == 0) {
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN;
@@ -1356,7 +1356,7 @@ static void garmin_unthrottle(struct tty_struct *tty)
if (garmin_data_p->mode == MODE_NATIVE)
garmin_flush_queue(garmin_data_p);
- if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+ if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) != 0) {
status = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (status)
dev_err(&port->dev,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2c69bfc..6a2fab8 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2039,7 +2039,7 @@ static int mos7810_check(struct usb_serial *serial)
/* Send the 1-bit test pattern out to MCS7810 test pin */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCS_WRREQ, MCS_WR_RTYPE,
- (0x0300 | (((test_pattern >> i) & 0x0001) << 1)),
+ ((((test_pattern >> i) & 0x0001) << 1) | 0x0300),
MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
/* Read the test pattern back */
@@ -2059,7 +2059,7 @@ static int mos7810_check(struct usb_serial *serial)
/* Restore MCR setting */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCS_WRREQ,
- MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
+ MCS_WR_RTYPE, mcr_data | 0x0300, MODEM_CONTROL_REGISTER, NULL,
0, MOS_WDR_TIMEOUT);
kfree(buf);
--
2.6.4
Powered by blists - more mailing lists