Message-ID: <1454690044-2560-3-git-send-email-nm@ti.com>
Date:	Fri, 5 Feb 2016 10:34:04 -0600
From:	Nishanth Menon <nm@...com>
To:	Jassi Brar <jassisinghbrar@...il.com>, Suman Anna <s-anna@...com>
CC:	Franklin S Cooper Jr <fcooper@...com>,
	<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	Santosh Shilimkar <ssantosh@...nel.org>,
	Nishanth Menon <nm@...com>
Subject: [PATCH 2/2] mailbox: Introduce TI message manager driver

Support for TI Message Manager Module. This hardware block manages a
bunch of hardware queues meant for communication between processor
entities.

Clients sitting on top of this would manage the required protocol
for communicating with the counterpart entities.

For more details on TI Message Manager hardware block, see documentation
that is available here: http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf
Chapter 8.1(Message Manager)

Signed-off-by: Nishanth Menon <nm@...com>
---
 drivers/mailbox/Kconfig     |  11 +
 drivers/mailbox/Makefile    |   2 +
 drivers/mailbox/ti-msgmgr.c | 603 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/ti-msgmgr.h   |  35 +++
 4 files changed, 651 insertions(+)
 create mode 100644 drivers/mailbox/ti-msgmgr.c
 create mode 100644 include/linux/ti-msgmgr.h

diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 546d05f4358a..5da85ae48a59 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -78,6 +78,17 @@ config STI_MBOX
 	  Mailbox implementation for STMicroelectonics family chips with
 	  hardware for interprocessor communication.
 
+config TI_MESSAGE_MANAGER
+	tristate "Texas Instruments Message Manager Driver"
+	depends on ARCH_KEYSTONE
+	help
+	  An implementation of Message Manager slave driver for Keystone
+	  architecture SoCs from Texas Instruments. Message Manager is a
+	  communication entity found on few of Texas Instrument's keystone
+	  architecture SoCs. These may be used for communication between
+	  multiple processors within the SoC. Select this driver if your
+	  platform has support for the hardware block.
+
 config MAILBOX_TEST
 	tristate "Mailbox Test Client"
 	depends on OF
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 92435ef11f26..a9c2899e44ff 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -17,3 +17,5 @@ obj-$(CONFIG_ALTERA_MBOX)	+= mailbox-altera.o
 obj-$(CONFIG_BCM2835_MBOX)	+= bcm2835-mailbox.o
 
 obj-$(CONFIG_STI_MBOX)		+= mailbox-sti.o
+
+obj-$(CONFIG_TI_MESSAGE_MANAGER) += ti-msgmgr.o
diff --git a/drivers/mailbox/ti-msgmgr.c b/drivers/mailbox/ti-msgmgr.c
new file mode 100644
index 000000000000..46f1b0adbedd
--- /dev/null
+++ b/drivers/mailbox/ti-msgmgr.c
@@ -0,0 +1,603 @@
+/*
+ * Texas Instruments' Message Manager Driver
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/ti-msgmgr.h>
+
+#define Q_DATA_OFFSET(proxy, queue, reg)	\
+		     ((0x10000 * (proxy)) + (0x80 * (queue)) + ((reg) * 4))
+#define Q_STATE_OFFSET(queue)			((queue) * 0x4)
+#define Q_STATE_ENTRY_COUNT_MASK		(0xFFF000)
+
+/**
+ * struct ti_msgmgr_desc - Description of message manager integration
+ * @queue_count:	Number of Queues
+ * @max_message_size:	Message size in bytes
+ * @max_messages:	Number of messages
+ * @q_slices:		Number of queue engines
+ * @q_proxies:		Number of queue proxies per page
+ * @data_first_reg:	First data register for proxy data region
+ * @data_last_reg:	Last data register for proxy data region
+ * @tx_polled:		Do I need to use polled mechanism for tx
+ * @tx_poll_timeout_ms: Timeout in ms if polled
+ *
+ * This structure is used in of match data to describe how integration
+ * for a specific compatible SoC is done.
+ */
+struct ti_msgmgr_desc {
+	u8 queue_count;
+	u8 max_message_size;
+	u8 max_messages;
+	u8 q_slices;
+	u8 q_proxies;
+	u8 data_first_reg;
+	u8 data_last_reg;
+	bool tx_polled;
+	int tx_poll_timeout_ms;
+};
+
+/**
+ * struct ti_queue_inst - Description of a queue instance
+ * @name:	Queue Name
+ * @queue_id:	Queue Identifier as mapped on SoC
+ * @proxy_id:	Proxy Identifier as mapped on SoC
+ * @irq:	IRQ for Rx Queue
+ * @is_tx:	'true' if transmit queue, else, 'false'
+ * @queue_buff_start: First register of Data Buffer
+ * @queue_buff_end: Last (or confirmation) register of Data buffer
+ * @queue_state: Queue status register
+ * @chan:	Mailbox channel
+ * @rx_buff:	Receive buffer pointer allocated at probe, max_message_size
+ */
+struct ti_queue_inst {
+	const char *name;
+	u32 queue_id;
+	u32 proxy_id;
+	int irq;
+	bool is_tx;
+	void __iomem *queue_buff_start;
+	void __iomem *queue_buff_end;
+	void __iomem *queue_state;
+	struct mbox_chan *chan;
+	u32 *rx_buff;
+};
+
+/**
+ * struct ti_msgmgr_inst - Description of a Message Manager Instance
+ * @dev:	device pointer corresponding to the Message Manager instance
+ * @desc:	Description of the SoC integration
+ * @queue_proxy_region:	Queue proxy region where queue buffers are located
+ * @queue_state_debug_region:	Queue status register regions
+ * @num_valid_queues:	Number of valid queues defined for the processor
+ *		Note: other queues are probably reserved for other processors
+ *		in the SoC.
+ * @qinsts:	Array of valid Queue Instances for the Processor
+ * @mbox:	Mailbox Controller
+ * @chans:	Array for channels corresponding to the Queue Instances.
+ */
+struct ti_msgmgr_inst {
+	struct device *dev;
+	const struct ti_msgmgr_desc *desc;
+	void __iomem *queue_proxy_region;
+	void __iomem *queue_state_debug_region;
+	u8 num_valid_queues;
+	struct ti_queue_inst *qinsts;
+	struct mbox_controller mbox;
+	struct mbox_chan *chans;
+};
+
+/**
+ * ti_msgmgr_queue_get_num_messages() - Get the number of pending messages
+ * @qinst:	Queue instance for which we check the number of pending messages
+ *
+ * Return: number of messages pending in the queue (0 == no pending messages)
+ */
+static inline int ti_msgmgr_queue_get_num_messages(struct ti_queue_inst *qinst)
+{
+	u32 val;
+
+	/*
+	 * We cannot use relaxed operation here - update may happen
+	 * real-time.
+	 */
+	val = readl(qinst->queue_state) & Q_STATE_ENTRY_COUNT_MASK;
+	val >>= __ffs(Q_STATE_ENTRY_COUNT_MASK);
+
+	return val;
+}
+
+/**
+ * ti_msgmgr_queue_rx_interrupt() - Interrupt handler for receive Queue
+ * @irq:	Interrupt number
+ * @p:		Channel Pointer
+ *
+ * Return: -EINVAL if there is no instance
+ * IRQ_NONE if the interrupt is not ours.
+ * IRQ_HANDLED if the rx interrupt was successfully handled.
+ */
+static irqreturn_t ti_msgmgr_queue_rx_interrupt(int irq, void *p)
+{
+	struct mbox_chan *chan = p;
+	struct device *dev = chan->mbox->dev;
+	struct ti_msgmgr_inst *inst = dev_get_drvdata(dev);
+	struct ti_queue_inst *qinst = chan->con_priv;
+	const struct ti_msgmgr_desc *desc;
+	int msg_count, num_words;
+	struct ti_msgmgr_message message;
+	void __iomem *data_reg;
+	u32 *word_data;
+
+	if (WARN_ON(!inst)) {
+		dev_err(dev, "no platform drv data??\n");
+		return -EINVAL;
+	}
+
+	/* Do I have an invalid interrupt source? */
+	if (qinst->is_tx) {
+		dev_err(dev, "Cannot handle rx interrupt on tx channel %s\n",
+			qinst->name);
+		return IRQ_NONE;
+	}
+
+	/* Do I actually have messages to read? */
+	msg_count = ti_msgmgr_queue_get_num_messages(qinst);
+	if (!msg_count) {
+		dev_dbg(dev, "Spurious event - 0 pending data!\n");
+		return IRQ_NONE;
+	}
+
+	/*
+	 * I have no idea about the protocol being used to communicate with the
+	 * remote producer - 0 is valid data, so I wont make a judgement of how
+	 * many bytes I should be reading. Let the client figure this out.. I
+	 * just read the full message and pass it on..
+	 */
+	desc = inst->desc;
+	message.len = desc->max_message_size;
+	message.buf = (u8 *)qinst->rx_buff;
+
+	/*
+	 * NOTE about register access involved here:
+	 * the hardware block is implemented with 32bit access operations and no
+	 * support for data splitting.  We don't want the hardware to misbehave
+	 * with sub 32bit access - For example: if the last register read is
+	 * split into byte wise access, it can result in the queue getting
+	 * stuck or indeterminate behavior. Hence, we do not use memcpy_fromio
+	 * here.
+	 * Also note that the final register read automatically marks the
+	 * queue message as read.
+	 */
+	for (data_reg = qinst->queue_buff_start, word_data = qinst->rx_buff,
+	     num_words = (desc->max_message_size / sizeof(u32));
+	     num_words; num_words--, data_reg += sizeof(u32), word_data++)
+		*word_data = readl(data_reg);
+
+	/*
+	 * Last register read automatically clears the IRQ if only 1 message
+	 * is pending - so send the data up the stack..
+	 * NOTE: Client is expected to be as optimal as possible, since
+	 * we invoke the handler in IRQ context.
+	 */
+	mbox_chan_received_data(chan, (void *)&message);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ti_msgmgr_queue_peek_data() - Peek to see if there are any rx messages.
+ * @chan:	Channel Pointer
+ *
+ * Return: 'true' if there is pending rx data, 'false' if there is none.
+ */
+static bool ti_msgmgr_queue_peek_data(struct mbox_chan *chan)
+{
+	struct ti_queue_inst *qinst = chan->con_priv;
+	int msg_count;
+
+	if (qinst->is_tx)
+		return false;
+
+	msg_count = ti_msgmgr_queue_get_num_messages(qinst);
+
+	return msg_count ? true : false;
+}
+
+/**
+ * ti_msgmgr_last_tx_done() - See if all the tx messages are sent
+ * @chan:	Channel pointer
+ *
+ * Return: 'true' is no pending tx data, 'false' if there are any.
+ */
+static bool ti_msgmgr_last_tx_done(struct mbox_chan *chan)
+{
+	struct ti_queue_inst *qinst = chan->con_priv;
+	int msg_count;
+
+	if (!qinst->is_tx)
+		return false;
+
+	msg_count = ti_msgmgr_queue_get_num_messages(qinst);
+
+	/* if we have any messages pending.. */
+	return msg_count ? false : true;
+}
+
+/**
+ * ti_msgmgr_send_data() - Send data
+ * @chan:	Channel Pointer
+ * @data:	ti_msgmgr_message * Message Pointer
+ *
+ * Return: 0 if all goes good, else appropriate error messages.
+ */
+static int ti_msgmgr_send_data(struct mbox_chan *chan, void *data)
+{
+	struct device *dev = chan->mbox->dev;
+	struct ti_msgmgr_inst *inst = dev_get_drvdata(dev);
+	const struct ti_msgmgr_desc *desc;
+	struct ti_queue_inst *qinst = chan->con_priv;
+	int msg_count, num_words, trail_bytes;
+	struct ti_msgmgr_message *message = data;
+	void __iomem *data_reg;
+	u32 *word_data;
+
+	if (WARN_ON(!inst)) {
+		dev_err(dev, "no platform drv data??\n");
+		return -EINVAL;
+	}
+	desc = inst->desc;
+
+	if (desc->max_message_size < message->len) {
+		dev_err(dev, "Queue %s message length %d > max %d\n",
+			qinst->name, message->len, desc->max_message_size);
+		return -EINVAL;
+	}
+
+	/* Are we able to send this or not? */
+	msg_count = ti_msgmgr_queue_get_num_messages(qinst);
+	if (msg_count >= desc->max_messages) {
+		dev_warn(dev, "Queue %s is full (%d messages)\n", qinst->name,
+			 msg_count);
+		return -EBUSY;
+	}
+
+	/*
+	 * NOTE about register access involved here:
+	 * the hardware block is implemented with 32bit access operations and no
+	 * support for data splitting.  We don't want the hardware to misbehave
+	 * with sub 32bit access - For example: if the last register write is
+	 * split into byte wise access, it can result in the queue getting
+	 * stuck or dummy messages being transmitted or indeterminate behavior.
+	 * Hence, we do not use memcpy_toio here.
+	 */
+	for (data_reg = qinst->queue_buff_start,
+	     num_words = message->len / sizeof(u32),
+	     word_data = (u32 *)message->buf;
+	     num_words; num_words--, data_reg += sizeof(u32), word_data++)
+		writel(*word_data, data_reg);
+
+	trail_bytes = message->len % sizeof(u32);
+	if (trail_bytes) {
+		u32 data_trail = *word_data;
+
+		/* Ensure all unused data is 0 */
+		data_trail &= 0xFFFFFFFF >> (8 * (sizeof(u32) - trail_bytes));
+		writel(data_trail, data_reg);
+		data_reg++;
+	}
+	/*
+	 * 'data_reg' indicates next register to write. If we did not already
+	 * write on tx complete reg(last reg), we must do so for transmit
+	 */
+	if (data_reg <= qinst->queue_buff_end)
+		writel(0, qinst->queue_buff_end);
+
+	return 0;
+}
+
+/**
+ * ti_msgmgr_queue_startup() - Startup queue
+ * @chan:	Channel pointer
+ *
+ * Return: 0 if all goes good, else return corresponding error message
+ */
+static int ti_msgmgr_queue_startup(struct mbox_chan *chan)
+{
+	struct ti_queue_inst *qinst = chan->con_priv;
+	struct device *dev = chan->mbox->dev;
+	int ret;
+
+	if (!qinst->is_tx) {
+		/*
+		 * With the expectation that the IRQ might be shared in
+		 * future
+		 */
+		ret = request_irq(qinst->irq, ti_msgmgr_queue_rx_interrupt,
+				  IRQF_SHARED, qinst->name, chan);
+		if (ret) {
+			dev_err(dev, "Unable to get IRQ %d on %s(res=%d)\n",
+				qinst->irq, qinst->name, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ti_msgmgr_queue_shutdown() - Shutdown the queue
+ * @chan:	Channel pointer
+ */
+static void ti_msgmgr_queue_shutdown(struct mbox_chan *chan)
+{
+	struct ti_queue_inst *qinst = chan->con_priv;
+
+	if (!qinst->is_tx)
+		free_irq(qinst->irq, chan);
+}
+
+/**
+ * ti_msgmgr_of_xlate() - Translation of phandle to queue
+ * @mbox:	Mailbox controller
+ * @p:		phandle pointer
+ *
+ * Return: Mailbox channel corresponding to the queue, else return error
+ * pointer.
+ */
+static struct mbox_chan *ti_msgmgr_of_xlate(struct mbox_controller *mbox,
+					    const struct of_phandle_args *p)
+{
+	struct ti_msgmgr_inst *inst;
+	struct device_node *np;
+	phandle phandle = p->args[0];
+	struct ti_queue_inst *qinst;
+	int i;
+	struct mbox_chan *chan = ERR_PTR(-ENOENT);
+
+	inst = container_of(mbox, struct ti_msgmgr_inst, mbox);
+	if (WARN_ON(!inst))
+		return ERR_PTR(-EINVAL);
+
+	np = of_find_node_by_phandle(phandle);
+	if (!np) {
+		dev_err(inst->dev, "Unable to find phandle %p\n", p);
+		return ERR_PTR(-ENODEV);
+	}
+
+	for (qinst = inst->qinsts, i = 0; i < inst->num_valid_queues;
+	     i++, qinst++) {
+		/* not using strncmp: What could be a valid length here?? */
+		if (!strcmp(qinst->name, np->name)) {
+			chan = qinst->chan;
+			break;
+		}
+	}
+	of_node_put(np);
+
+	return chan;
+}
+
+/* Queue operations */
+static const struct mbox_chan_ops ti_msgmgr_chan_ops = {
+	.startup = ti_msgmgr_queue_startup,
+	.shutdown = ti_msgmgr_queue_shutdown,
+	.peek_data = ti_msgmgr_queue_peek_data,
+	.last_tx_done = ti_msgmgr_last_tx_done,
+	.send_data = ti_msgmgr_send_data,
+};
+
+/* Keystone K2G SoC integration details */
+static const struct ti_msgmgr_desc k2g_desc = {
+	.queue_count = 64,
+	.max_message_size = 64,
+	.max_messages = 128,
+	.q_slices = 1,
+	.q_proxies = 1,
+	.data_first_reg = 16,
+	.data_last_reg = 31,
+	.tx_polled = false,
+};
+
+static const struct of_device_id ti_msgmgr_of_match[] = {
+	{.compatible = "ti,k2g-message-manager", .data = &k2g_desc},
+	{.compatible = "ti,message-manager", .data = &k2g_desc},
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ti_msgmgr_of_match);
+
+static int ti_msgmgr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
+	struct device_node *np, *child;
+	struct resource *res;
+	const struct ti_msgmgr_desc *desc;
+	struct ti_msgmgr_inst *inst;
+	struct ti_queue_inst *qinst;
+	struct mbox_controller *mbox;
+	struct mbox_chan *chans;
+	int queue_count;
+	int i;
+	int ret = -EINVAL;
+
+	if (!dev->of_node) {
+		dev_err(dev, "no OF information\n");
+		return -EINVAL;
+	}
+	np = dev->of_node;
+
+	of_id = of_match_device(ti_msgmgr_of_match, dev);
+	if (!of_id) {
+		dev_err(dev, "OF data missing\n");
+		return -EINVAL;
+	}
+	desc = of_id->data;
+
+	inst = devm_kzalloc(dev, sizeof(*inst), GFP_KERNEL);
+	if (!inst)
+		return -ENOMEM;
+
+	inst->dev = dev;
+	inst->desc = desc;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "queue_proxy_region");
+	inst->queue_proxy_region = devm_ioremap_resource(dev, res);
+	if (IS_ERR(inst->queue_proxy_region))
+		return PTR_ERR(inst->queue_proxy_region);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "queue_state_debug_region");
+	inst->queue_state_debug_region = devm_ioremap_resource(dev, res);
+	if (IS_ERR(inst->queue_state_debug_region))
+		return PTR_ERR(inst->queue_state_debug_region);
+
+	dev_dbg(dev, "proxy region=%p, queue_state=%p\n",
+		inst->queue_proxy_region, inst->queue_state_debug_region);
+
+	queue_count = of_get_available_child_count(np);
+	if (!queue_count) {
+		dev_err(dev, "No child nodes representing queues\n");
+		return -EINVAL;
+	}
+	if (queue_count > desc->queue_count) {
+		dev_err(dev, "Number of queues %d > max %d\n",
+			queue_count, desc->queue_count);
+		return -ERANGE;
+	}
+	inst->num_valid_queues = queue_count;
+
+	qinst = devm_kzalloc(dev, sizeof(*qinst) * queue_count, GFP_KERNEL);
+	if (!qinst)
+		return -ENOMEM;
+	inst->qinsts = qinst;
+
+	chans = devm_kzalloc(dev, sizeof(*chans) * queue_count, GFP_KERNEL);
+	if (!chans)
+		return -ENOMEM;
+	inst->chans = chans;
+
+	for (i = 0, child = NULL; i < queue_count; i++, qinst++, chans++) {
+		child = of_get_next_available_child(np, child);
+		ret = of_property_read_u32(child, "ti,queue-id",
+					   &qinst->queue_id);
+		if (ret) {
+			dev_err(dev, "Child node %s[idx=%d] has no queue-id\n",
+				child->name, i);
+			return -EINVAL;
+		}
+		if (qinst->queue_id > desc->queue_count) {
+			dev_err(dev, "Child node %s[idx=%d] queuid %d > %d\n",
+				child->name, i, qinst->queue_id,
+				desc->queue_count);
+			return -ERANGE;
+		}
+
+		ret = of_property_read_u32(child, "ti,proxy-id",
+					   &qinst->proxy_id);
+		if (ret) {
+			dev_err(dev, "Child node %s[idx=%d] has no proxy-id\n",
+				child->name, i);
+			return -EINVAL;
+		}
+
+		qinst->irq = of_irq_get_byname(child, "rx");
+		/* TX queues don't have IRQ numbers */
+		if (qinst->irq < 0) {
+			qinst->irq = -1;
+			qinst->is_tx = true;
+		}
+
+		qinst->queue_buff_start = inst->queue_proxy_region +
+		    Q_DATA_OFFSET(qinst->proxy_id, qinst->queue_id,
+				  desc->data_first_reg);
+		qinst->queue_buff_end = inst->queue_proxy_region +
+		    Q_DATA_OFFSET(qinst->proxy_id, qinst->queue_id,
+				  desc->data_last_reg);
+		qinst->queue_state = inst->queue_state_debug_region +
+		    Q_STATE_OFFSET(qinst->queue_id);
+		qinst->name = child->name;
+		qinst->chan = chans;
+
+		/* Allocate usage buffer for rx */
+		if (!qinst->is_tx) {
+			qinst->rx_buff = devm_kzalloc(dev,
+						      desc->max_message_size,
+						      GFP_KERNEL);
+			if (!qinst->rx_buff)
+				return -ENOMEM;
+		}
+
+		chans->con_priv = qinst;
+
+		dev_dbg(dev, "[%d] qidx=%d pidx=%d irq=%d q_s=%p q_e = %p\n",
+			i, qinst->queue_id, qinst->proxy_id, qinst->irq,
+			qinst->queue_buff_start, qinst->queue_buff_end);
+	}
+
+	mbox = &inst->mbox;
+	mbox->dev = dev;
+	mbox->ops = &ti_msgmgr_chan_ops;
+	mbox->chans = inst->chans;
+	mbox->num_chans = inst->num_valid_queues;
+	mbox->txdone_irq = false;
+	mbox->txdone_poll = desc->tx_polled;
+	if (desc->tx_polled)
+		mbox->txpoll_period = desc->tx_poll_timeout_ms;
+	mbox->of_xlate = ti_msgmgr_of_xlate;
+
+	platform_set_drvdata(pdev, inst);
+	ret = mbox_controller_register(mbox);
+	if (ret)
+		dev_err(dev, "Failed to register mbox_controller(%d)\n", ret);
+
+	return ret;
+}
+
+static int ti_msgmgr_remove(struct platform_device *pdev)
+{
+	struct ti_msgmgr_inst *inst;
+
+	inst = platform_get_drvdata(pdev);
+	mbox_controller_unregister(&inst->mbox);
+
+	return 0;
+}
+
+static struct platform_driver ti_msgmgr_driver = {
+	.probe = ti_msgmgr_probe,
+	.remove = ti_msgmgr_remove,
+	.driver = {
+		   .name = "ti-msgmgr",
+		   .of_match_table = of_match_ptr(ti_msgmgr_of_match),
+	},
+};
+module_platform_driver(ti_msgmgr_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI message manager driver");
+MODULE_AUTHOR("Nishanth Menon");
+MODULE_ALIAS("platform:ti-msgmgr");
diff --git a/include/linux/ti-msgmgr.h b/include/linux/ti-msgmgr.h
new file mode 100644
index 000000000000..2c6a01850028
--- /dev/null
+++ b/include/linux/ti-msgmgr.h
@@ -0,0 +1,35 @@
+/*
+ * Texas Instruments' Message Manager
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef TI_MSGMGR_H
+#define TI_MSGMGR_H
+
+/**
+ * struct ti_msgmgr_message - Message Manager structure
+ * @len: Length of data in the Buffer
+ * @buf: Buffer pointer
+ *
+ * This is the structure for data used in mbox_send_message
+ * the length of data buffer used depends on the SoC integration
+ * parameters - each message may be 64, 128 bytes long depending
+ * on SoC. Client is supposed to be aware of this.
+ */
+struct ti_msgmgr_message {
+	size_t len;
+	u8 *buf;
+};
+
+#endif /* TI_MSGMGR_H */
-- 
2.7.0

Powered by blists - more mailing lists