| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1454697741-8687-4-git-send-email-contact@paulk.fr>
Date: Fri, 5 Feb 2016 19:42:20 +0100
From: Paul Kocialkowski <contact@...lk.fr>
To: linux-kernel@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
Benoît Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, Milo Kim <milo.kim@...com>,
Javier Martinez Canillas <javier@...hile0.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-omap@...r.kernel.org, Paul Kocialkowski <contact@...lk.fr>
Subject: [PATCH v2 3/4] ARM: LG Optimus Black (P970) codename sniper support, with basic features
The LG Optimus Black (P970) codename sniper is a smartphone that was designed
and manufactured by LG Electronics (LGE) and released back in 2011.
It is using an OMAP3630 SoC, GP version.
This adds devicetree support for the device, with only a few basic features
supported, such as debug uart, i2c, internal emmc and external mmc.
Signed-off-by: Paul Kocialkowski <contact@...lk.fr>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap3-sniper.dts | 215 +++++++++++++++++++++++++++++++++++++
2 files changed, 216 insertions(+)
create mode 100644 arch/arm/boot/dts/omap3-sniper.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a4a6d70..7314cf8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -460,6 +460,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
omap3-sbc-t3517.dtb \
omap3-sbc-t3530.dtb \
omap3-sbc-t3730.dtb \
+ omap3-sniper.dtb \
omap3-thunder.dtb \
omap3-zoom3.dtb
dtb-$(CONFIG_SOC_TI81XX) += \
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
new file mode 100644
index 0000000..24bcd82
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sniper.dts
@@ -0,0 +1,215 @@
+/*
+ * Copyright (C) 2015-2016 Paul Kocialkowski <contact@...lk.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+ model = "LG Optimus Black (P970)";
+ compatible = "lge,omap3-sniper", "ti,omap36xx", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx */
+ >;
+ };
+
+ dp3t_sel_pins: pinmux_dp3t_sel_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4) /* gpio_161 */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* gpio_162 */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ lp8720_en_pin: pinmux_lp8720_en_pin {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4) /* gpio_37 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0) /* sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0) /* sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0) /* sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ pinctrl-names = "default";
+
+ mmc1_cd_pin: pinmux_mmc1_cd_pin {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4) /* gpio_10 */
+ >;
+ };
+};
+
+&gpio2 {
+ ti,no-reset-on-init;
+};
+
+&gpio5 {
+ ti,no-reset-on-init;
+};
+
+&gpio6 {
+ ti,no-reset-on-init;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins &dp3t_sel_pins>;
+
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_power: power {
+ compatible = "ti,twl4030-power";
+ ti,use_poweroff;
+ };
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+
+ lp8720@7d {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lp8720_en_pin>;
+
+ compatible = "ti,lp8720";
+ reg = <0x7d>;
+
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */
+
+ lp8720_ldo1: ldo1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>;
+ vmmc-supply = <&lp8720_ldo1>;
+ cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */
+ bus-width = <4>;
+};
+
+&mmc2 {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vmmc2>;
+ ti,non-removable;
+ bus-width = <8>;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+/*
+ * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3.
+ * When not powered, these sensors cause the I2C3 clock to stay low at all times,
+ * making it impossible to reach other devices on I2C3.
+ */
+
+&vaux2 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+};
+
+&vdac {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
--
1.9.1
Powered by blists - more mailing lists