[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1454698133.2623.4.camel@collins>
Date: Fri, 05 Feb 2016 19:48:53 +0100
From: Paul Kocialkowski <contact@...lk.fr>
To: Rob Herring <robh@...nel.org>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Mark Rutland <mark.rutland@....com>,
Milo Kim <milo.kim@...com>,
Russell King <linux@....linux.org.uk>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Tony Lindgren <tony@...mide.com>,
Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Benoît Cousson <bcousson@...libre.com>,
Kumar Gala <galak@...eaurora.org>,
linux-omap <linux-omap@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 4/6] regulator: lp872x: Add enable GPIO pin support
Hi,
Le mardi 29 décembre 2015 à 15:55 -0600, Rob Herring a écrit :
> On Tue, Dec 29, 2015 at 3:26 PM, Paul Kocialkowski <contact@...lk.fr> wrote:
> > Le mardi 29 décembre 2015 à 14:02 -0600, Rob Herring a écrit :
> >> On Wed, Dec 23, 2015 at 11:58:37AM +0100, Paul Kocialkowski wrote:
> >> > LP872x regulators are made active via the EN pin, which might be hooked to a
> >> > GPIO. This adds support for driving the GPIO high when the driver is in use.
> >> >
> >> > Signed-off-by: Paul Kocialkowski <contact@...lk.fr>
> >> > ---
> >> > .../devicetree/bindings/regulator/lp872x.txt | 1 +
> >> > drivers/regulator/lp872x.c | 33 ++++++++++++++++++++--
> >> > include/linux/regulator/lp872x.h | 2 ++
> >> > 3 files changed, 33 insertions(+), 3 deletions(-)
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt
> >> > index 7818318..0559c25 100644
> >> > --- a/Documentation/devicetree/bindings/regulator/lp872x.txt
> >> > +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt
> >> > @@ -28,6 +28,7 @@ Optional properties:
> >> > - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
> >> > - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
> >> > - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
> >> > + - ti,enable-gpio: GPIO specifier for EN pin control of LP872x devices.
> >>
> >> Should be "-gpios" instead of "-gpio".
Thanks for the review Rob, I have just submitted v2 with those
suggestions integrated.
> > Care to comment why? There is only one GPIO that can be used here, since
> > there is only one single EN pin. I thought this matched what is done
> > already with "ti,dvs-gpio".
>
> To be consistent. We use "clocks" and "interrupts" always whether one
> or more for example.
>
> -gpio is documented as deprecated now.
>
> Rob
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists