linux-kernel - Re: [PATCH v5 3/4] Documentation: afe4403: Add DT bindings for the AFE4403 heart monitor

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <56B64268.8090306@kernel.org>
Date:	Sat, 6 Feb 2016 18:58:48 +0000
From:	Jonathan Cameron <jic23@...nel.org>
To:	"Andrew F. Davis" <afd@...com>, Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Hartmut Knaack <knaack.h@....de>,
	Lars-Peter Clausen <lars@...afoo.de>,
	Peter Meerwald <pmeerw@...erw.net>
Cc:	devicetree@...r.kernel.org, linux-iio@...r.kernel.org,
	linux-api@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 3/4] Documentation: afe4403: Add DT bindings for the
 AFE4403 heart monitor

On 02/02/16 17:50, Andrew F. Davis wrote:
> Add the TI AFE4403 heart monitor DT bindings documentation.
> 
> Signed-off-by: Andrew F. Davis <afd@...com>
Given this is near identical to the AFE4404 binding I'll assume the lack of
comment on that means this one is fine too ;)

Applied to the togreg branch of iio.git - initially pushed out as testing
for the autobuilders to ignore it.

Jonathan
> ---
>  .../devicetree/bindings/iio/health/afe4403.txt     | 34 ++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/health/afe4403.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/health/afe4403.txt b/Documentation/devicetree/bindings/iio/health/afe4403.txt
> new file mode 100644
> index 0000000..2fffd70
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/health/afe4403.txt
> @@ -0,0 +1,34 @@
> +Texas Instruments AFE4403 Heart rate and Pulse Oximeter
> +
> +Required properties:
> + - compatible		: Should be "ti,afe4403".
> + - reg			: SPI chip select address of device.
> + - tx-supply		: Regulator supply to transmitting LEDs.
> + - interrupt-parent	: Phandle to he parent interrupt controller.
> + - interrupts		: The interrupt line the device ADC_RDY pin is
> +			  connected to. For details refer to,
> +			  ../../interrupt-controller/interrupts.txt.
> +
> +Optional properties:
> + - reset-gpios		: GPIO used to reset the device.
> +			  For details refer to, ../../gpio/gpio.txt.
> +
> +For other required and optional properties of SPI slave nodes
> +please refer to ../../spi/spi-bus.txt.
> +
> +Example:
> +
> +&spi0 {
> +	heart_mon@0 {
> +		compatible = "ti,afe4403";
> +		reg = <0>;
> +		spi-max-frequency = <10000000>;
> +
> +		tx-supply = <&vbat>;
> +
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
> +
> +		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
> +	};
> +};
>