Date:	Tue,  9 Feb 2016 00:00:17 +0200
From:	Tomas Winkler <tomas.winkler@...el.com>
To:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:	Alexander Usyskin <alexander.usyskin@...el.com>,
	linux-kernel@...r.kernel.org,
	Tomas Winkler <tomas.winkler@...el.com>
Subject: [char-misc-next] mei: wd: drop AGAIN the watchdog code from the core mei driver

The file wd.c was remove from the driver by commit
commit fdd9b8655933 ("mei: wd: drop the watchdog code from the core mei
driver")

Unfortunately it came back by mistake in rebasing in the commit
commit 06ee536bcb15 ("mei: fill file pointer in read cb for fixed
address client")

Signed-off-by: Tomas Winkler <tomas.winkler@...el.com>
---
 drivers/misc/mei/wd.c | 391 --------------------------------------------------
 1 file changed, 391 deletions(-)
 delete mode 100644 drivers/misc/mei/wd.c

diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
deleted file mode 100644
index 7d9b4ee42f65..000000000000
--- a/drivers/misc/mei/wd.c
+++ /dev/null
@@ -1,391 +0,0 @@
-/*
- *
- * Intel Management Engine Interface (Intel MEI) Linux driver
- * Copyright (c) 2003-2012, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/sched.h>
-#include <linux/watchdog.h>
-
-#include <linux/mei.h>
-
-#include "mei_dev.h"
-#include "hbm.h"
-#include "client.h"
-
-static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 };
-static const u8 mei_stop_wd_params[] = { 0x02, 0x02, 0x14, 0x10 };
-
-/*
- * AMT Watchdog Device
- */
-#define INTEL_AMT_WATCHDOG_ID "INTCAMT"
-
-/* UUIDs for AMT F/W clients */
-const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89,
-						0x9D, 0xA9, 0x15, 0x14, 0xCB,
-						0x32, 0xAB);
-
-static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
-{
-	dev_dbg(dev->dev, "wd: set timeout=%d.\n", timeout);
-	memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE);
-	memcpy(dev->wd_data + MEI_WD_HDR_SIZE, &timeout, sizeof(u16));
-}
-
-/**
- * mei_wd_host_init - connect to the watchdog client
- *
- * @dev: the device structure
- * @me_cl: me client
- *
- * Return: -ENOTTY if wd client cannot be found
- *         -EIO if write has failed
- *         0 on success
- */
-int mei_wd_host_init(struct mei_device *dev, struct mei_me_client *me_cl)
-{
-	struct mei_cl *cl = &dev->wd_cl;
-	int ret;
-
-	mei_cl_init(cl, dev);
-
-	dev->wd_timeout = MEI_WD_DEFAULT_TIMEOUT;
-	dev->wd_state = MEI_WD_IDLE;
-
-	ret = mei_cl_link(cl, MEI_WD_HOST_CLIENT_ID);
-	if (ret < 0) {
-		dev_info(dev->dev, "wd: failed link client\n");
-		return ret;
-	}
-
-	ret = mei_cl_connect(cl, me_cl, NULL);
-	if (ret) {
-		dev_err(dev->dev, "wd: failed to connect = %d\n", ret);
-		mei_cl_unlink(cl);
-		return ret;
-	}
-
-	ret = mei_watchdog_register(dev);
-	if (ret) {
-		mei_cl_disconnect(cl);
-		mei_cl_unlink(cl);
-	}
-	return ret;
-}
-
-/**
- * mei_wd_send - sends watch dog message to fw.
- *
- * @dev: the device structure
- *
- * Return: 0 if success,
- *	-EIO when message send fails
- *	-EINVAL when invalid message is to be sent
- *	-ENODEV on flow control failure
- */
-int mei_wd_send(struct mei_device *dev)
-{
-	struct mei_cl *cl = &dev->wd_cl;
-	struct mei_msg_hdr hdr;
-	int ret;
-
-	hdr.host_addr = cl->host_client_id;
-	hdr.me_addr = mei_cl_me_id(cl);
-	hdr.msg_complete = 1;
-	hdr.reserved = 0;
-	hdr.internal = 0;
-
-	if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE))
-		hdr.length = MEI_WD_START_MSG_SIZE;
-	else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_HDR_SIZE))
-		hdr.length = MEI_WD_STOP_MSG_SIZE;
-	else {
-		dev_err(dev->dev, "wd: invalid message is to be sent, aborting\n");
-		return -EINVAL;
-	}
-
-	ret = mei_write_message(dev, &hdr, dev->wd_data);
-	if (ret) {
-		dev_err(dev->dev, "wd: write message failed\n");
-		return ret;
-	}
-
-	ret = mei_cl_flow_ctrl_reduce(cl);
-	if (ret) {
-		dev_err(dev->dev, "wd: flow_ctrl_reduce failed.\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-/**
- * mei_wd_stop - sends watchdog stop message to fw.
- *
- * @dev: the device structure
- *
- * Return: 0 if success
- * on error:
- *	-EIO    when message send fails
- *	-EINVAL when invalid message is to be sent
- *	-ETIME  on message timeout
- */
-int mei_wd_stop(struct mei_device *dev)
-{
-	struct mei_cl *cl = &dev->wd_cl;
-	int ret;
-
-	if (!mei_cl_is_connected(cl) ||
-	    dev->wd_state != MEI_WD_RUNNING)
-		return 0;
-
-	memcpy(dev->wd_data, mei_stop_wd_params, MEI_WD_STOP_MSG_SIZE);
-
-	dev->wd_state = MEI_WD_STOPPING;
-
-	ret = mei_cl_flow_ctrl_creds(cl, NULL);
-	if (ret < 0)
-		goto err;
-
-	if (ret && mei_hbuf_acquire(dev)) {
-		ret = mei_wd_send(dev);
-		if (ret)
-			goto err;
-		dev->wd_pending = false;
-	} else {
-		dev->wd_pending = true;
-	}
-
-	mutex_unlock(&dev->device_lock);
-
-	ret = wait_event_timeout(dev->wait_stop_wd,
-				dev->wd_state == MEI_WD_IDLE,
-				msecs_to_jiffies(MEI_WD_STOP_TIMEOUT));
-	mutex_lock(&dev->device_lock);
-	if (dev->wd_state != MEI_WD_IDLE) {
-		/* timeout */
-		ret = -ETIME;
-		dev_warn(dev->dev, "wd: stop failed to complete ret=%d\n", ret);
-		goto err;
-	}
-	dev_dbg(dev->dev, "wd: stop completed after %u msec\n",
-			MEI_WD_STOP_TIMEOUT - jiffies_to_msecs(ret));
-	return 0;
-err:
-	return ret;
-}
-
-/**
- * mei_wd_ops_start - wd start command from the watchdog core.
- *
- * @wd_dev: watchdog device struct
- *
- * Return: 0 if success, negative errno code for failure
- */
-static int mei_wd_ops_start(struct watchdog_device *wd_dev)
-{
-	struct mei_device *dev;
-	struct mei_cl *cl;
-	int err = -ENODEV;
-
-	dev = watchdog_get_drvdata(wd_dev);
-	if (!dev)
-		return -ENODEV;
-
-	cl = &dev->wd_cl;
-
-	mutex_lock(&dev->device_lock);
-
-	if (dev->dev_state != MEI_DEV_ENABLED) {
-		dev_dbg(dev->dev, "wd: dev_state != MEI_DEV_ENABLED  dev_state = %s\n",
-			mei_dev_state_str(dev->dev_state));
-		goto end_unlock;
-	}
-
-	if (!mei_cl_is_connected(cl)) {
-		cl_dbg(dev, cl, "MEI Driver is not connected to Watchdog Client\n");
-		goto end_unlock;
-	}
-
-	mei_wd_set_start_timeout(dev, dev->wd_timeout);
-
-	err = 0;
-end_unlock:
-	mutex_unlock(&dev->device_lock);
-	return err;
-}
-
-/**
- * mei_wd_ops_stop -  wd stop command from the watchdog core.
- *
- * @wd_dev: watchdog device struct
- *
- * Return: 0 if success, negative errno code for failure
- */
-static int mei_wd_ops_stop(struct watchdog_device *wd_dev)
-{
-	struct mei_device *dev;
-
-	dev = watchdog_get_drvdata(wd_dev);
-	if (!dev)
-		return -ENODEV;
-
-	mutex_lock(&dev->device_lock);
-	mei_wd_stop(dev);
-	mutex_unlock(&dev->device_lock);
-
-	return 0;
-}
-
-/**
- * mei_wd_ops_ping - wd ping command from the watchdog core.
- *
- * @wd_dev: watchdog device struct
- *
- * Return: 0 if success, negative errno code for failure
- */
-static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
-{
-	struct mei_device *dev;
-	struct mei_cl *cl;
-	int ret;
-
-	dev = watchdog_get_drvdata(wd_dev);
-	if (!dev)
-		return -ENODEV;
-
-	cl = &dev->wd_cl;
-
-	mutex_lock(&dev->device_lock);
-
-	if (!mei_cl_is_connected(cl)) {
-		cl_err(dev, cl, "wd: not connected.\n");
-		ret = -ENODEV;
-		goto end;
-	}
-
-	dev->wd_state = MEI_WD_RUNNING;
-
-	ret = mei_cl_flow_ctrl_creds(cl, NULL);
-	if (ret < 0)
-		goto end;
-
-	/* Check if we can send the ping to HW*/
-	if (ret && mei_hbuf_acquire(dev)) {
-		dev_dbg(dev->dev, "wd: sending ping\n");
-
-		ret = mei_wd_send(dev);
-		if (ret)
-			goto end;
-		dev->wd_pending = false;
-	} else {
-		dev->wd_pending = true;
-	}
-
-end:
-	mutex_unlock(&dev->device_lock);
-	return ret;
-}
-
-/**
- * mei_wd_ops_set_timeout - wd set timeout command from the watchdog core.
- *
- * @wd_dev: watchdog device struct
- * @timeout: timeout value to set
- *
- * Return: 0 if success, negative errno code for failure
- */
-static int mei_wd_ops_set_timeout(struct watchdog_device *wd_dev,
-		unsigned int timeout)
-{
-	struct mei_device *dev;
-
-	dev = watchdog_get_drvdata(wd_dev);
-	if (!dev)
-		return -ENODEV;
-
-	/* Check Timeout value */
-	if (timeout < MEI_WD_MIN_TIMEOUT || timeout > MEI_WD_MAX_TIMEOUT)
-		return -EINVAL;
-
-	mutex_lock(&dev->device_lock);
-
-	dev->wd_timeout = timeout;
-	wd_dev->timeout = timeout;
-	mei_wd_set_start_timeout(dev, dev->wd_timeout);
-
-	mutex_unlock(&dev->device_lock);
-
-	return 0;
-}
-
-/*
- * Watchdog Device structs
- */
-static const struct watchdog_ops wd_ops = {
-		.owner = THIS_MODULE,
-		.start = mei_wd_ops_start,
-		.stop = mei_wd_ops_stop,
-		.ping = mei_wd_ops_ping,
-		.set_timeout = mei_wd_ops_set_timeout,
-};
-static const struct watchdog_info wd_info = {
-		.identity = INTEL_AMT_WATCHDOG_ID,
-		.options = WDIOF_KEEPALIVEPING |
-			   WDIOF_SETTIMEOUT |
-			   WDIOF_ALARMONLY,
-};
-
-static struct watchdog_device amt_wd_dev = {
-		.info = &wd_info,
-		.ops = &wd_ops,
-		.timeout = MEI_WD_DEFAULT_TIMEOUT,
-		.min_timeout = MEI_WD_MIN_TIMEOUT,
-		.max_timeout = MEI_WD_MAX_TIMEOUT,
-};
-
-
-int mei_watchdog_register(struct mei_device *dev)
-{
-
-	int ret;
-
-	amt_wd_dev.parent = dev->dev;
-	/* unlock to perserve correct locking order */
-	mutex_unlock(&dev->device_lock);
-	ret = watchdog_register_device(&amt_wd_dev);
-	mutex_lock(&dev->device_lock);
-	if (ret) {
-		dev_err(dev->dev, "wd: unable to register watchdog device = %d.\n",
-			ret);
-		return ret;
-	}
-
-	dev_dbg(dev->dev, "wd: successfully register watchdog interface.\n");
-	watchdog_set_drvdata(&amt_wd_dev, dev);
-	return 0;
-}
-
-void mei_watchdog_unregister(struct mei_device *dev)
-{
-	if (watchdog_get_drvdata(&amt_wd_dev) == NULL)
-		return;
-
-	watchdog_set_drvdata(&amt_wd_dev, NULL);
-	watchdog_unregister_device(&amt_wd_dev);
-}
-
-- 
2.4.3

Powered by blists - more mailing lists