| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAC5umyhA+KQUA=U+EotY4FTGao9_qUBopNNeUswNj1Ed2eQHng@mail.gmail.com>
Date: Tue, 9 Feb 2016 21:05:36 +0900
From: Akinobu Mita <akinobu.mita@...il.com>
To: Joao Pinto <Joao.Pinto@...opsys.com>
Cc: vinayak holikatti <vinholikatti@...il.com>,
julian.calaby@...il.com, Christoph Hellwig <hch@...radead.org>,
Mark Rutland <mark.rutland@....com>,
Gilad Broner <gbroner@...eaurora.org>,
Subhash Jadavani <subhashj@...eaurora.org>,
CARLOS.PALMINHA@...opsys.com,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
LKML <linux-kernel@...r.kernel.org>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"open list:OPEN FIRMWARE AND..." <devicetree@...r.kernel.org>
Subject: Re: [PATCH 2/2] add support for DWC UFS Host Controller
Hi Joao,
2016-02-09 4:07 GMT+09:00 Joao Pinto <Joao.Pinto@...opsys.com>:
> diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/scsi/ufs/ufshcd-dwc.c
> new file mode 100644
> index 0000000..b12b1a8
> --- /dev/null
> +++ b/drivers/scsi/ufs/ufshcd-dwc.c
> @@ -0,0 +1,768 @@
> +/*
> + * UFS Host driver for Synopsys Designware Core
> + *
> + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
> + *
> + * Authors: Joao Pinto <jpinto@...opsys.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "ufshcd.h"
> +#include "unipro.h"
> +
> +#include "ufshcd-dwc.h"
> +#include "ufshci-dwc.h"
> +
> +/**
> + * ufshcd_dwc_program_clk_div()
> + * This function programs the clk divider value. This value is needed to
> + * provide 1 microsecond tick to unipro layer.
> + * @hba: Private Structure pointer
> + * @divider_val: clock divider value to be programmed
> + *
> + */
> +void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
> +{
> + ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
> +}
> +EXPORT_SYMBOL(ufshcd_dwc_program_clk_div);
> +
> +/**
> + * ufshcd_dwc_link_is_up()
> + * Check if link is up
> + * @hba: private structure poitner
> + *
> + * Returns 0 on success, non-zero value on failure
> + */
> +int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
> +{
> + int dme_result = 0;
> +
> + ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result);
> +
> + if (dme_result == UFSHCD_LINK_IS_UP) {
> + ufshcd_set_link_active(hba);
> + return 0;
> + }
> +
> + return 1;
> +}
> +EXPORT_SYMBOL(ufshcd_dwc_link_is_up);
> +
> +/**
> + * ufshcd_dwc_connection_setup()
> + * This function configures both the local side (host) and the peer side
> + * (device) unipro attributes to establish the connection to application/
> + * cport.
> + * This function is not required if the hardware is properly configured to
> + * have this connection setup on reset. But invoking this function does no
> + * harm and should be fine even working with any ufs device.
> + *
> + * @hba: pointer to drivers private data
> + *
> + * Returns 0 on success non-zero value on failure
> + */
> +int ufshcd_dwc_connection_setup(struct ufs_hba *hba)
> +{
> + int ret = 0;
> +
> + /* Local side Configuration */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 0);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID), 0);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(N_DEVICEID_VALID), 0);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_PEERDEVICEID), 1);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_PEERCPORTID), 0);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_TRAFFICCLASS), 0);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CPORTFLAGS), 0x6);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CPORTMODE), 1);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 1);
> + if (ret)
> + goto out;
> +
> +
> + /* Peer side Configuration */
> + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 0);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(N_DEVICEID), 1);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(N_DEVICEID_VALID), 1);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_PEERDEVICEID), 1);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_PEERCPORTID), 0);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_TRAFFICCLASS), 0);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CPORTFLAGS), 0x6);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CPORTMODE), 1);
> + if (ret)
> + goto out;
> +
> + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(T_CONNECTIONSTATE), 1);
> + if (ret)
> + goto out;
> +
> +out:
> + return ret;
> +}
> +
> +/**
> + * ufshcd_dwc_setup_20bit_rmmi_lane0()
> + * This function configures Synopsys MPHY 20-bit RMMI Lane 0
> + * @hba: Pointer to drivers structure
> + *
> + * Returns 0 on success or non-zero value on failure
> + */
> +int ufshcd_dwc_setup_20bit_rmmi_lane0(struct ufs_hba *hba)
> +{
> + int ret = 0;
> +
> + /* TX Reference Clock 26MHz */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_REFCLKFREQ,
> + SELIND_LN0_TX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* TX Configuration Clock Frequency Val; Divider setting */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL,
> + SELIND_LN0_TX), 0x19);
> + if (ret)
> + goto out;
> +
> + /* RX Configuration Clock Frequency Val; Divider setting */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL,
> + SELIND_LN0_RX), 0x19);
> + if (ret)
> + goto out;
> +
> + /* TX 20-bit RMMI Interface */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGEXTRATTR,
> + SELIND_LN0_TX), 0x12);
> + if (ret)
> + goto out;
> +
> + /* TX dither configuration */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(DITHERCTRL2,
> + SELIND_LN0_TX), 0xd6);
> + if (ret)
> + goto out;
> +
> + /* RX Reference Clock 26MHz */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_REFCLKFREQ,
> + SELIND_LN0_RX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* RX 20-bit RMMI Interface */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGWIDEINLN,
> + SELIND_LN0_RX), 2);
> + if (ret)
> + goto out;
> +
> + /* RX Squelch Detector output is routed to RX hibern8 exit signal */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8,
> + SELIND_LN0_RX), 0x80);
> + if (ret)
> + goto out;
> +
> + /* Common block Direct Control 10 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL10), 0x04);
> + if (ret)
> + goto out;
> +
> + /* Common block Direct Control 19 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL19), 0x02);
> + if (ret)
> + goto out;
> +
> + /* ENARXDIRECTCFG4 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG4,
> + SELIND_LN0_RX), 0x03);
> + if (ret)
> + goto out;
> +
> + /* CFGRXOVR8 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR8,
> + SELIND_LN0_RX), 0x16);
> + if (ret)
> + goto out;
> +
> + /* RXDIRECTCTRL2 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXDIRECTCTRL2,
> + SELIND_LN0_RX), 0x42);
> +
> + if (ret)
> + goto out;
> +
> + /* ENARXDIRECTCFG3 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG3,
> + SELIND_LN0_RX), 0xa4);
> +
> + if (ret)
> + goto out;
> +
> + /* RXCALCTRL */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXCALCTRL,
> + SELIND_LN0_RX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* ENARXDIRECTCFG2 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG2,
> + SELIND_LN0_RX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* CFGOVR4 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR4,
> + SELIND_LN0_RX), 0x28);
> + if (ret)
> + goto out;
> +
> + /* RXSQCTRL */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXSQCTRL,
> + SELIND_LN0_RX), 0x1E);
> + if (ret)
> + goto out;
> +
> + /* CFGOVR6 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR6,
> + SELIND_LN0_RX), 0x2f);
> + if (ret)
> + goto out;
> +
> + /* CBPRGPLL2 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGPLL2), 0x00);
> +
> +out:
> + return ret;
> +}
> +
> +/**
> + * ufshcd_dwc_setup_20bit_rmmi_lane1()
> + * This function configures Synopsys MPHY 20-bit RMMI Lane 1
> + * @hba: Pointer to drivers structure
> + *
> + * Returns 0 on success or non-zero value on failure
> + */
> +int ufshcd_dwc_setup_20bit_rmmi_lane1(struct ufs_hba *hba)
> +{
> + int connected_rx_lanes = 0;
> + int connected_tx_lanes = 0;
> + int ret = 0;
> +
> + /* Get the available lane count */
> + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES),
> + &connected_rx_lanes);
> + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
> + &connected_tx_lanes);
> +
> + if (connected_tx_lanes == 2) {
> +
> + /* TX Reference Clock 26MHz */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_REFCLKFREQ,
> + SELIND_LN1_TX), 0x0d);
> + if (ret)
> + goto out;
> +
> + /* TX Configuration Clock Frequency Val; Divider setting */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL,
> + SELIND_LN1_TX), 0x19);
> + if (ret)
> + goto out;
> +
> + /* TX 20-bit RMMI Interface */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGEXTRATTR,
> + SELIND_LN1_TX), 0x12);
> + if (ret)
> + goto out;
> +
> + /* TX dither configuration */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(DITHERCTRL2,
> + SELIND_LN0_TX), 0xd6);
> + if (ret)
> + goto out;
> + }
> +
> + if (connected_rx_lanes == 2) {
> +
> + /* RX Reference Clock 26MHz */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_REFCLKFREQ,
> + SELIND_LN1_RX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* RX Configuration Clock Frequency Val; Divider setting */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL,
> + SELIND_LN1_RX), 0x19);
> + if (ret)
> + goto out;
> +
> + /* RX 20-bit RMMI Interface */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGWIDEINLN,
> + SELIND_LN1_RX), 2);
> + if (ret)
> + goto out;
> +
> + /* RX Squelch Detector output is routed to RX hibern8 exit
> + * signal
> + */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8,
> + SELIND_LN1_RX), 0x80);
> + if (ret)
> + goto out;
> +
> + /* ENARXDIRECTCFG4 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG4,
> + SELIND_LN1_RX), 0x03);
> + if (ret)
> + goto out;
> +
> + /* CFGRXOVR8 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR8,
> + SELIND_LN1_RX), 0x16);
> + if (ret)
> + goto out;
> +
> + /* RXDIRECTCTRL2 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXDIRECTCTRL2,
> + SELIND_LN1_RX), 0x42);
> + if (ret)
> + goto out;
> +
> + /* ENARXDIRECTCFG3 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG3,
> + SELIND_LN1_RX), 0xa4);
> + if (ret)
> + goto out;
> +
> + /* RXCALCTRL */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXCALCTRL,
> + SELIND_LN1_RX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* ENARXDIRECTCFG2 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG2,
> + SELIND_LN1_RX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* CFGOVR4 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR4,
> + SELIND_LN1_RX), 0x28);
> + if (ret)
> + goto out;
> +
> + /* RXSQCTRL */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXSQCTRL,
> + SELIND_LN1_RX), 0x1E);
> + if (ret)
> + goto out;
> +
> + /* CFGOVR6 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR6,
> + SELIND_LN1_RX), 0x2f);
> + if (ret)
> + goto out;
> + }
> +
> +out:
> + return ret;
> +}
> +
> +/**
> + * ufshcd_dwc_setup_20bit_rmmi()
> + * This function configures Synopsys MPHY specific atributes (20-bit RMMI)
> + * @hba: Pointer to drivers structure
> + *
> + * Returns 0 on success or non-zero value on failure
> + */
> +int ufshcd_dwc_setup_20bit_rmmi(struct ufs_hba *hba)
> +{
> + int ret = 0;
> +
> + /* Common block Tx Global Hibernate Exit */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00);
> + if (ret)
> + goto out;
> +
> + /* Common block Reference Clock Mode 26MHz */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(REFCLKMODE), 0x01);
> + if (ret)
> + goto out;
> +
> + /* Common block DCO Target Frequency MAX PWM G1:9Mpbs */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CDIRECTCTRL6), 0xc0);
> + if (ret)
> + goto out;
> +
> + /* Common block TX and RX Div Factor is 4 7Mbps/20 = 350KHz */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDIVFACTOR), 0x44);
> + if (ret)
> + goto out;
> +
> + /* Common Block DC0 Ctrl 5*/
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDCOCTRL5), 0x64);
> + if (ret)
> + goto out;
> +
> + /* Common Block Program Tunning*/
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGTUNING), 0x09);
> + if (ret)
> + goto out;
> +
> + /* Common Block Real Time Observe Select - for debugging */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(RTOBSERVESELECT), 0x00);
> + if (ret)
> + goto out;
> +
> + /* Lane 0 configuration*/
> + ret = ufshcd_dwc_setup_20bit_rmmi_lane0(hba);
> + if (ret)
> + goto out;
> +
> + /* Lane 1 configuration*/
> + ret = ufshcd_dwc_setup_20bit_rmmi_lane1(hba);
> + if (ret)
> + goto out;
> +
> +out:
> + return ret;
> +}
> +
> +/**
> + * ufshcd_dwc_setup_40bit_rmmi()
> + * This function configures Synopsys MPHY specific atributes (40-bit RMMI)
> + * @hba: Pointer to drivers structure
> + *
> + * Returns 0 on success or non-zero value on failure
> + */
> +int ufshcd_dwc_setup_40bit_rmmi(struct ufs_hba *hba)
> +{
> + int ret = 0;
> +
> + /* Common block Tx Global Hibernate Exit */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00);
> + if (ret)
> + goto out;
> +
> + /* Common block Reference Clock Mode 26MHz */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(REFCLKMODE), 0x01);
> + if (ret)
> + goto out;
> +
> + /* Common block DCO Target Frequency MAX PWM G1:7Mpbs */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CDIRECTCTRL6), 0x80);
> + if (ret)
> + goto out;
> +
> + /* Common block TX and RX Div Factor is 4 7Mbps/40 = 175KHz */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDIVFACTOR), 0x08);
> + if (ret)
> + goto out;
> +
> + /* Common Block DC0 Ctrl 5*/
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBDCOCTRL5), 0x64);
> + if (ret)
> + goto out;
> +
> + /* Common Block Program Tunning*/
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGTUNING), 0x09);
> + if (ret)
> + goto out;
> +
> + /* Common Block Real Time Observe Select - for debugging */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(RTOBSERVESELECT), 0x00);
> + if (ret)
> + goto out;
> +
> + /* Lane 0 configuration*/
> +
> + /* TX Reference Clock 26MHz */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_REFCLKFREQ,
> + SELIND_LN0_TX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* TX Configuration Clock Frequency Val; Divider setting */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL,
> + SELIND_LN0_TX), 0x19);
> + if (ret)
> + goto out;
> +
> + /* TX 40-bit RMMI Interface */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGEXTRATTR,
> + SELIND_LN0_TX), 0x14);
> + if (ret)
> + goto out;
> +
> + /* TX dither configuration */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(DITHERCTRL2,
> + SELIND_LN0_TX), 0xd6);
> + if (ret)
> + goto out;
> +
> + /* RX Reference Clock 26MHz */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_REFCLKFREQ,
> + SELIND_LN0_RX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* RX Configuration Clock Frequency Val; Divider setting */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL,
> + SELIND_LN0_RX), 0x19);
> + if (ret)
> + goto out;
> +
> + /* RX 40-bit RMMI Interface */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGWIDEINLN,
> + SELIND_LN0_RX), 4);
> + if (ret)
> + goto out;
> +
> + /* RX Squelch Detector output is routed to RX hibern8 exit signal */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8,
> + SELIND_LN0_RX), 0x80);
> + if (ret)
> + goto out;
> +
> + /* RX Squelch Detector output is routed to RX hibern8 exit signal */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8,
> + SELIND_LN0_RX), 0x80);
> + if (ret)
> + goto out;
> +
> + /* Common block Direct Control 10 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL10), 0x04);
> + if (ret)
> + goto out;
> +
> + /* Common block Direct Control 19 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(DIRECTCTRL19), 0x02);
> + if (ret)
> + goto out;
> +
> + /* RX Squelch Detector output is routed to RX hibern8 exit signal */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXCDR8,
> + SELIND_LN0_RX), 0x80);
> + if (ret)
> + goto out;
> +
> + /* ENARXDIRECTCFG4 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG4,
> + SELIND_LN0_RX), 0x03);
> + if (ret)
> + goto out;
> +
> + /* CFGRXOVR8 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR8,
> + SELIND_LN0_RX), 0x16);
> + if (ret)
> + goto out;
> +
> + /* RXDIRECTCTRL2 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXDIRECTCTRL2,
> + SELIND_LN0_RX), 0x42);
> + if (ret)
> + goto out;
> +
> + /* ENARXDIRECTCFG3 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG3,
> + SELIND_LN0_RX), 0xa4);
> + if (ret)
> + goto out;
> +
> + /* RXCALCTRL */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXCALCTRL,
> + SELIND_LN0_RX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* ENARXDIRECTCFG2 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(ENARXDIRECTCFG2,
> + SELIND_LN0_RX), 0x01);
> + if (ret)
> + goto out;
> +
> + /* CFGOVR4 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR4,
> + SELIND_LN0_RX), 0x28);
> + if (ret)
> + goto out;
> +
> + /* RXSQCTRL */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(RXSQCTRL,
> + SELIND_LN0_RX), 0x1E);
> + if (ret)
> + goto out;
> +
> + /* CFGOVR6 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(CFGRXOVR6,
> + SELIND_LN0_RX), 0x2f);
> + if (ret)
> + goto out;
> +
> + /* CBPRGPLL2 */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(CBPRGPLL2), 0x00);
> + if (ret)
> + goto out;
> +
> +out:
> + return ret;
> +}
> +
> +/**
> + * ufshcd_dwc_setup_mphy()
> + * This function configures Local (host) Synopsys MPHY specific attributes
> + *
> + * @hba: Pointer to drivers structure
> + *
> + * Returns 0 on success non-zero value on failure
> + */
> +int ufshcd_dwc_setup_mphy(struct ufs_hba *hba)
> +{
> + int ret = 0;
> +
> +#ifdef CONFIG_SCSI_UFS_DWC_40BIT_RMMI
> + dev_info(hba->dev, "Configuring MPHY 40-bit RMMI");
> + ret = ufshcd_dwc_setup_40bit_rmmi(hba);
> + if (ret) {
> + dev_err(hba->dev, "40-bit RMMI configuration failed");
> + goto out;
> + }
> +#else
> +#ifdef CONFIG_SCSI_UFS_DWC_20BIT_RMMI
> + dev_info(hba->dev, "Configuring MPHY 20-bit RMMI");
> + ret = ufshcd_dwc_setup_20bit_rmmi(hba);
> + if (ret) {
> + dev_err(hba->dev, "20-bit RMMI configuration failed");
> + goto out;
> + }
> +#endif
> +#endif
> + /* To write Shadow register bank to effective configuration block */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
> + if (ret)
> + goto out;
> +
> + /* To configure Debug OMC */
> + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
> +
> +out:
> + return ret;
> +}
These functions are only used in this file.
ufshcd_dwc_program_clk_div
ufshcd_dwc_link_is_up
ufshcd_dwc_connection_setup
ufshcd_dwc_setup_20bit_rmmi_lane0
ufshcd_dwc_setup_20bit_rmmi_lane1
ufshcd_dwc_setup_20bit_rmmi
ufshcd_dwc_setup_40bit_rmmi
ufshcd_dwc_setup_mphy
So you can make them static functions.
> +/**
> + * ufshcd_dwc_configuration()
> + * UFS Host DWC specific configuration
> + * @hba: private structure poitner
> + *
> + * Returns 0 on success, non-zero value on failure
> + */
> +int ufshcd_dwc_configuration(struct ufs_hba *hba)
> +{
> + int ret = 0;
> +
> + /* Program Clock Divider Value */
> + ufshcd_dwc_program_clk_div(hba, UFSHCD_CLK_DIV_125);
> +
> +#ifdef CONFIG_SCSI_UFS_DWC_MPHY_TC
> + ret = ufshcd_dwc_setup_mphy(hba);
> + if (ret) {
> + dev_err(hba->dev, "MPHY configuration failed (%d)", ret);
> + goto out;
> + }
> +#endif
> + ret = ufshcd_dme_link_startup(hba);
> + if (ret) {
> + dev_err(hba->dev, "Link Startup command failed (%d)", ret);
> + goto out;
> + }
> +
> + ret = ufshcd_dwc_link_is_up(hba);
> + if (ret) {
> + dev_err(hba->dev, "Link is not up");
> + goto out;
> + }
> +
> + ret = ufshcd_dwc_connection_setup(hba);
> + if (ret) {
> + dev_err(hba->dev, "Connection setup failed (%d)", ret);
> + goto out;
> + }
> +
> + ret = ufshcd_make_hba_operational(hba);
> + if (ret) {
> + dev_err(hba->dev, "HBA kick start failed (%d)", ret);
> + goto out;
> + }
> +
> + ret = ufshcd_verify_dev_init(hba);
> + if (ret) {
> + dev_err(hba->dev, "Device init failed (%d)", ret);
> + goto out;
> + }
> +
> + ret = ufshcd_complete_dev_init(hba);
> + if (ret) {
> + dev_err(hba->dev, "Device final init failed (%d)", ret);
> + goto out;
> + }
> +
> + ufshcd_set_ufs_dev_active(hba);
> + hba->wlun_dev_clr_ua = false;
> +
> + if (hba->ufshcd_state == UFSHCD_STATE_RESET)
> + scsi_unblock_requests(hba->host);
> +
> + hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
> +
> + scsi_scan_host(hba->host);
> +
> +out:
> + return ret;
> +}
> +EXPORT_SYMBOL(ufshcd_dwc_configuration);
Do you really need this alternative initialization by
adding new custom_probe_hba() in vops? I think you only need to write
link_startup_notify() callback for ufs_dwc_hba_vops like below.
ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
enum ufs_notify_change_status status)
{
if (status == PRE_CHANGE) {
ufshcd_dwc_program_clk_div();
ufshcd_dwc_setup_mphy();
} else { /* POST_CHANGE */
err = ufshcd_dwc_link_is_up(hba);
if (err)
return err;
ufshcd_dwc_connection_setup();
}
}
Powered by blists - more mailing lists