| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1455029929-18547-4-git-send-email-k@japko.eu>
Date: Tue, 9 Feb 2016 15:58:47 +0100
From: Krzysztof Adamski <krzysztof.adamski@...to.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>,
Hans de Goede <hdegoede@...hat.com>,
Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>,
Jens Kuske <jenskuske@...il.com>,
Fabian Frederick <fabf@...net.be>,
Vishnu Patekar <vishnupatekar0510@...il.com>,
linux-gpio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Cc: Krzysztof Adamski <k@...ko.eu>
Subject: [PATCH v4 3/5] pinctrl: sunxi: Add H3 R_PIO controller support
H3 has additional PIO controller similar to what we can find on A23.
It's a 12 pin port, described in H3 Datasheet rev 1.1, pages 345-350.
Signed-off-by: Krzysztof Adamski <k@...ko.eu>
Acked-by: Chen-Yu Tsai <wens@...e.org>
Acked-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
.../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 +
drivers/pinctrl/sunxi/Kconfig | 4 +
drivers/pinctrl/sunxi/Makefile | 1 +
drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c | 106 +++++++++++++++++++++
4 files changed, 112 insertions(+)
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 9213b27..3e56b16 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -21,6 +21,7 @@ Required properties:
"allwinner,sun9i-a80-r-pinctrl"
"allwinner,sun8i-a83t-pinctrl"
"allwinner,sun8i-h3-pinctrl"
+ "allwinner,sun8i-h3-r-pinctrl"
- reg: Should contain the register physical address and length for the
pin controller.
diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index f8dbc8b..75a26c9 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -55,6 +55,10 @@ config PINCTRL_SUN8I_H3
def_bool MACH_SUN8I
select PINCTRL_SUNXI_COMMON
+config PINCTRL_SUN8I_H3_R
+ def_bool MACH_SUN8I
+ select PINCTRL_SUNXI_COMMON
+
config PINCTRL_SUN9I_A80
def_bool MACH_SUN9I
select PINCTRL_SUNXI_COMMON
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index ef82f22..a5d56f1 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -14,5 +14,6 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o
obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o
obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o
+obj-$(CONFIG_PINCTRL_SUN8I_H3_R) += pinctrl-sun8i-h3-r.o
obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o
obj-$(CONFIG_PINCTRL_SUN9I_A80_R) += pinctrl-sun9i-a80-r.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c
new file mode 100644
index 0000000..686ec21
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c
@@ -0,0 +1,106 @@
+/*
+ * Allwinner H3 SoCs pinctrl driver.
+ *
+ * Copyright (C) 2016 Krzysztof Adamski <k@...ko.eu>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin sun8i_h3_r_pins[] = {
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_twi"), /* SCK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PL_EINT0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_twi"), /* SDA */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PL_EINT1 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_uart"), /* TX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* PL_EINT2 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_uart"), /* RX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* PL_EINT3 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_jtag"), /* MS */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* PL_EINT4 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 5),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_jtag"), /* CK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* PL_EINT5 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 6),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_jtag"), /* DO */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PL_EINT6 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 7),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_jtag"), /* DI */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* PL_EINT7 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 8),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* PL_EINT8 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 9),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* PL_EINT9 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 10),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_pwm"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)), /* PL_EINT10 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 11),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_cir_rx"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)), /* PL_EINT11 */
+};
+
+static const struct sunxi_pinctrl_desc sun8i_h3_r_pinctrl_data = {
+ .pins = sun8i_h3_r_pins,
+ .npins = ARRAY_SIZE(sun8i_h3_r_pins),
+ .irq_banks = 1,
+ .pin_base = PL_BASE,
+ .irq_read_needs_mux = true
+};
+
+static int sun8i_h3_r_pinctrl_probe(struct platform_device *pdev)
+{
+ return sunxi_pinctrl_init(pdev,
+ &sun8i_h3_r_pinctrl_data);
+}
+
+static const struct of_device_id sun8i_h3_r_pinctrl_match[] = {
+ { .compatible = "allwinner,sun8i-h3-r-pinctrl", },
+ {}
+};
+
+static struct platform_driver sun8i_h3_r_pinctrl_driver = {
+ .probe = sun8i_h3_r_pinctrl_probe,
+ .driver = {
+ .name = "sun8i-h3-r-pinctrl",
+ .of_match_table = sun8i_h3_r_pinctrl_match,
+ },
+};
+builtin_platform_driver(sun8i_h3_r_pinctrl_driver);
--
2.1.4
Powered by blists - more mailing lists