[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1455104237-10771-1-git-send-email-srinivas.kandagatla@linaro.org>
Date: Wed, 10 Feb 2016 11:37:17 +0000
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Andy Gross <andy.gross@...aro.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH v2 7/8] arm64: dts: qcom: apq8016-sbc: enable bam dma node.
This patch enables bam dma node, dma is used for both tx and rx on spi
and on high speed serial.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 8ab87e7..a1a39d0 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -33,6 +33,10 @@
};
soc {
+ dma@...4000 {
+ status = "okay";
+ };
+
serial@...f000 {
label = "LS-UART0";
status = "okay";
--
1.9.1
Powered by blists - more mailing lists