| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1455143161-10511-1-git-send-email-aduggan@synaptics.com>
Date: Wed, 10 Feb 2016 14:26:01 -0800
From: Andrew Duggan <aduggan@...aptics.com>
To: <linux-input@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: Andrew Duggan <aduggan@...aptics.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Jiri Kosina <jikos@...nel.org>,
Benjamin Tissoires <benjamin.tissoires@...hat.com>,
Christopher Heiny <cheiny@...aptics.com>,
Stephen Chandler Paul <cpaul@...hat.com>,
Vincent Huang <vincent.huang@...synaptics.com>,
Chris Healy <cphealy@...il.com>,
Andrey Gusakov <andrey.gusakov@...entembedded.com>
Subject: [PATCH v5 10/10] HID: rmi: Make hid-rmi a transport driver for synaptics-rmi4
The Synaptics RMI4 driver provides support for RMI4 devices. Instead of
duplicating the RMI4 processing code, make hid-rmi a transport driver
and register it with the Synaptics RMI4 core.
Signed-off-by: Andrew Duggan <aduggan@...aptics.com>
---
drivers/hid/Kconfig | 2 +-
drivers/hid/hid-rmi.c | 891 +++++---------------------------------------------
2 files changed, 75 insertions(+), 818 deletions(-)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 513a16c..9cba717 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -740,7 +740,7 @@ config HID_SUNPLUS
config HID_RMI
tristate "Synaptics RMI4 device support"
- depends on HID
+ depends on HID && RMI4_CORE
---help---
Support for Synaptics RMI4 touchpads.
Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 67cd059..a680222 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/sched.h>
+#include <linux/rmi.h>
#include "hid-ids.h"
#define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */
@@ -33,9 +34,6 @@
#define RMI_READ_DATA_PENDING 1
#define RMI_STARTED 2
-#define RMI_SLEEP_NORMAL 0x0
-#define RMI_SLEEP_DEEP_SLEEP 0x1
-
/* device flags */
#define RMI_DEVICE BIT(0)
#define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1)
@@ -54,20 +52,6 @@ enum rmi_mode_type {
RMI_MODE_NO_PACKED_ATTN_REPORTS = 2,
};
-struct rmi_function {
- unsigned page; /* page of the function */
- u16 query_base_addr; /* base address for queries */
- u16 command_base_addr; /* base address for commands */
- u16 control_base_addr; /* base address for controls */
- u16 data_base_addr; /* base address for datas */
- unsigned int interrupt_base; /* cross-function interrupt number
- * (uniq in the device)*/
- unsigned int interrupt_count; /* number of interrupts */
- unsigned int report_size; /* size of a report */
- unsigned long irq_mask; /* mask of the interrupts
- * (to be applied against ATTN IRQ) */
-};
-
/**
* struct rmi_data - stores information for hid communication
*
@@ -104,6 +88,7 @@ struct rmi_function {
struct rmi_data {
struct mutex page_mutex;
int page;
+ struct rmi_transport_dev xport;
wait_queue_head_t wait;
@@ -115,34 +100,10 @@ struct rmi_data {
unsigned long flags;
- struct rmi_function f01;
- struct rmi_function f11;
- struct rmi_function f30;
-
- unsigned int max_fingers;
- unsigned int max_x;
- unsigned int max_y;
- unsigned int x_size_mm;
- unsigned int y_size_mm;
- bool read_f11_ctrl_regs;
- u8 f11_ctrl_regs[RMI_F11_CTRL_REG_COUNT];
-
- unsigned int gpio_led_count;
- unsigned int button_count;
- unsigned long button_mask;
- unsigned long button_state_mask;
-
- struct input_dev *input;
-
struct work_struct reset_work;
struct hid_device *hdev;
unsigned long device_flags;
- unsigned long firmware_id;
-
- u8 f01_ctrl0;
- u8 interrupt_enable_mask;
- bool restore_interrupt_mask;
};
#define RMI_PAGE(addr) (((addr) >> 8) & 0xff)
@@ -214,10 +175,11 @@ static int rmi_write_report(struct hid_device *hdev, u8 *report, int len)
return ret;
}
-static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf,
- const int len)
+static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr,
+ void *buf, size_t len)
{
- struct rmi_data *data = hid_get_drvdata(hdev);
+ struct rmi_data *data = container_of(xport, struct rmi_data, xport);
+ struct hid_device *hdev = data->hdev;
int ret;
int bytes_read;
int bytes_needed;
@@ -286,15 +248,11 @@ exit:
return ret;
}
-static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf)
+static int rmi_hid_write_block(struct rmi_transport_dev *xport, u16 addr,
+ const void *buf, size_t len)
{
- return rmi_read_block(hdev, addr, buf, 1);
-}
-
-static int rmi_write_block(struct hid_device *hdev, u16 addr, void *buf,
- const int len)
-{
- struct rmi_data *data = hid_get_drvdata(hdev);
+ struct rmi_data *data = container_of(xport, struct rmi_data, xport);
+ struct hid_device *hdev = data->hdev;
int ret;
mutex_lock(&data->page_mutex);
@@ -326,71 +284,13 @@ exit:
return ret;
}
-static inline int rmi_write(struct hid_device *hdev, u16 addr, void *buf)
-{
- return rmi_write_block(hdev, addr, buf, 1);
-}
-
-static void rmi_f11_process_touch(struct rmi_data *hdata, int slot,
- u8 finger_state, u8 *touch_data)
-{
- int x, y, wx, wy;
- int wide, major, minor;
- int z;
-
- input_mt_slot(hdata->input, slot);
- input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER,
- finger_state == 0x01);
- if (finger_state == 0x01) {
- x = (touch_data[0] << 4) | (touch_data[2] & 0x0F);
- y = (touch_data[1] << 4) | (touch_data[2] >> 4);
- wx = touch_data[3] & 0x0F;
- wy = touch_data[3] >> 4;
- wide = (wx > wy);
- major = max(wx, wy);
- minor = min(wx, wy);
- z = touch_data[4];
-
- /* y is inverted */
- y = hdata->max_y - y;
-
- input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x);
- input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y);
- input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide);
- input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z);
- input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
- input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
- }
-}
-
-static int rmi_reset_attn_mode(struct hid_device *hdev)
-{
- struct rmi_data *data = hid_get_drvdata(hdev);
- int ret;
-
- ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
- if (ret)
- return ret;
-
- if (data->restore_interrupt_mask) {
- ret = rmi_write(hdev, data->f01.control_base_addr + 1,
- &data->interrupt_enable_mask);
- if (ret) {
- hid_err(hdev, "can not write F01 control register\n");
- return ret;
- }
- }
-
- return 0;
-}
-
static void rmi_reset_work(struct work_struct *work)
{
struct rmi_data *hdata = container_of(work, struct rmi_data,
reset_work);
/* switch the device to RMI if we receive a generic mouse report */
- rmi_reset_attn_mode(hdata->hdev);
+ rmi_set_mode(hdata->hdev, RMI_MODE_ATTN_REPORTS);
}
static inline int rmi_schedule_reset(struct hid_device *hdev)
@@ -399,96 +299,20 @@ static inline int rmi_schedule_reset(struct hid_device *hdev)
return schedule_work(&hdata->reset_work);
}
-static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data,
- int size)
-{
- struct rmi_data *hdata = hid_get_drvdata(hdev);
- int offset;
- int i;
-
- if (!(irq & hdata->f11.irq_mask) || size <= 0)
- return 0;
-
- offset = (hdata->max_fingers >> 2) + 1;
- for (i = 0; i < hdata->max_fingers; i++) {
- int fs_byte_position = i >> 2;
- int fs_bit_position = (i & 0x3) << 1;
- int finger_state = (data[fs_byte_position] >> fs_bit_position) &
- 0x03;
- int position = offset + 5 * i;
-
- if (position + 5 > size) {
- /* partial report, go on with what we received */
- printk_once(KERN_WARNING
- "%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n",
- dev_driver_string(&hdev->dev),
- dev_name(&hdev->dev));
- hid_dbg(hdev, "Incomplete finger report\n");
- break;
- }
-
- rmi_f11_process_touch(hdata, i, finger_state, &data[position]);
- }
- input_mt_sync_frame(hdata->input);
- input_sync(hdata->input);
- return hdata->f11.report_size;
-}
-
-static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data,
- int size)
-{
- struct rmi_data *hdata = hid_get_drvdata(hdev);
- int i;
- int button = 0;
- bool value;
-
- if (!(irq & hdata->f30.irq_mask))
- return 0;
-
- if (size < (int)hdata->f30.report_size) {
- hid_warn(hdev, "Click Button pressed, but the click data is missing\n");
- return 0;
- }
-
- for (i = 0; i < hdata->gpio_led_count; i++) {
- if (test_bit(i, &hdata->button_mask)) {
- value = (data[i / 8] >> (i & 0x07)) & BIT(0);
- if (test_bit(i, &hdata->button_state_mask))
- value = !value;
- input_event(hdata->input, EV_KEY, BTN_LEFT + button++,
- value);
- }
- }
- return hdata->f30.report_size;
-}
-
static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
{
struct rmi_data *hdata = hid_get_drvdata(hdev);
- unsigned long irq_mask = 0;
- unsigned index = 2;
+ struct rmi_device *rmi_dev = hdata->xport.rmi_dev;
+ struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
if (!(test_bit(RMI_STARTED, &hdata->flags)))
return 0;
- irq_mask |= hdata->f11.irq_mask;
- irq_mask |= hdata->f30.irq_mask;
-
- if (data[1] & ~irq_mask)
- hid_dbg(hdev, "unknown intr source:%02lx %s:%d\n",
- data[1] & ~irq_mask, __FILE__, __LINE__);
-
- if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) {
- index += rmi_f11_input_event(hdev, data[1], &data[index],
- size - index);
- index += rmi_f30_input_event(hdev, data[1], &data[index],
- size - index);
- } else {
- index += rmi_f30_input_event(hdev, data[1], &data[index],
- size - index);
- index += rmi_f11_input_event(hdev, data[1], &data[index],
- size - index);
- }
+ *(drvdata->irq_status) = data[1];
+ hdata->xport.attn_data = &data[2];
+ hdata->xport.attn_size = hdata->input_report_size - 2;
+
+ rmi_process_interrupt_requests(rmi_dev);
return 1;
}
@@ -570,626 +394,71 @@ static int rmi_event(struct hid_device *hdev, struct hid_field *field,
}
#ifdef CONFIG_PM
-static int rmi_set_sleep_mode(struct hid_device *hdev, int sleep_mode)
-{
- struct rmi_data *data = hid_get_drvdata(hdev);
- int ret;
- u8 f01_ctrl0;
-
- f01_ctrl0 = (data->f01_ctrl0 & ~0x3) | sleep_mode;
-
- ret = rmi_write(hdev, data->f01.control_base_addr,
- &f01_ctrl0);
- if (ret) {
- hid_err(hdev, "can not write sleep mode\n");
- return ret;
- }
-
- return 0;
-}
-
static int rmi_suspend(struct hid_device *hdev, pm_message_t message)
{
struct rmi_data *data = hid_get_drvdata(hdev);
+ struct rmi_device *rmi_dev = data->xport.rmi_dev;
int ret;
- u8 buf[RMI_F11_CTRL_REG_COUNT];
-
- ret = rmi_read_block(hdev, data->f11.control_base_addr, buf,
- RMI_F11_CTRL_REG_COUNT);
- if (ret)
- hid_warn(hdev, "can not read F11 control registers\n");
- else
- memcpy(data->f11_ctrl_regs, buf, RMI_F11_CTRL_REG_COUNT);
-
-
- if (!device_may_wakeup(hdev->dev.parent))
- return rmi_set_sleep_mode(hdev, RMI_SLEEP_DEEP_SLEEP);
-
- return 0;
-}
-
-static int rmi_post_reset(struct hid_device *hdev)
-{
- struct rmi_data *data = hid_get_drvdata(hdev);
- int ret;
-
- ret = rmi_reset_attn_mode(hdev);
- if (ret) {
- hid_err(hdev, "can not set rmi mode\n");
- return ret;
- }
-
- if (data->read_f11_ctrl_regs) {
- ret = rmi_write_block(hdev, data->f11.control_base_addr,
- data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT);
- if (ret)
- hid_warn(hdev,
- "can not write F11 control registers after reset\n");
- }
-
- if (!device_may_wakeup(hdev->dev.parent)) {
- ret = rmi_set_sleep_mode(hdev, RMI_SLEEP_NORMAL);
- if (ret) {
- hid_err(hdev, "can not write sleep mode\n");
- return ret;
- }
- }
-
- return ret;
-}
-
-static int rmi_post_resume(struct hid_device *hdev)
-{
- return rmi_reset_attn_mode(hdev);
-}
-#endif /* CONFIG_PM */
-
-#define RMI4_MAX_PAGE 0xff
-#define RMI4_PAGE_SIZE 0x0100
-
-#define PDT_START_SCAN_LOCATION 0x00e9
-#define PDT_END_SCAN_LOCATION 0x0005
-#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff)
-
-struct pdt_entry {
- u8 query_base_addr:8;
- u8 command_base_addr:8;
- u8 control_base_addr:8;
- u8 data_base_addr:8;
- u8 interrupt_source_count:3;
- u8 bits3and4:2;
- u8 function_version:2;
- u8 bit7:1;
- u8 function_number:8;
-} __attribute__((__packed__));
-
-static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count)
-{
- return GENMASK(irq_count + irq_base - 1, irq_base);
-}
-
-static void rmi_register_function(struct rmi_data *data,
- struct pdt_entry *pdt_entry, int page, unsigned interrupt_count)
-{
- struct rmi_function *f = NULL;
- u16 page_base = page << 8;
-
- switch (pdt_entry->function_number) {
- case 0x01:
- f = &data->f01;
- break;
- case 0x11:
- f = &data->f11;
- break;
- case 0x30:
- f = &data->f30;
- break;
- }
-
- if (f) {
- f->page = page;
- f->query_base_addr = page_base | pdt_entry->query_base_addr;
- f->command_base_addr = page_base | pdt_entry->command_base_addr;
- f->control_base_addr = page_base | pdt_entry->control_base_addr;
- f->data_base_addr = page_base | pdt_entry->data_base_addr;
- f->interrupt_base = interrupt_count;
- f->interrupt_count = pdt_entry->interrupt_source_count;
- f->irq_mask = rmi_gen_mask(f->interrupt_base,
- f->interrupt_count);
- data->interrupt_enable_mask |= f->irq_mask;
- }
-}
-
-static int rmi_scan_pdt(struct hid_device *hdev)
-{
- struct rmi_data *data = hid_get_drvdata(hdev);
- struct pdt_entry entry;
- int page;
- bool page_has_function;
- int i;
- int retval;
- int interrupt = 0;
- u16 page_start, pdt_start , pdt_end;
-
- hid_info(hdev, "Scanning PDT...\n");
-
- for (page = 0; (page <= RMI4_MAX_PAGE); page++) {
- page_start = RMI4_PAGE_SIZE * page;
- pdt_start = page_start + PDT_START_SCAN_LOCATION;
- pdt_end = page_start + PDT_END_SCAN_LOCATION;
-
- page_has_function = false;
- for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) {
- retval = rmi_read_block(hdev, i, &entry, sizeof(entry));
- if (retval) {
- hid_err(hdev,
- "Read of PDT entry at %#06x failed.\n",
- i);
- goto error_exit;
- }
-
- if (RMI4_END_OF_PDT(entry.function_number))
- break;
-
- page_has_function = true;
-
- hid_info(hdev, "Found F%02X on page %#04x\n",
- entry.function_number, page);
-
- rmi_register_function(data, &entry, page, interrupt);
- interrupt += entry.interrupt_source_count;
- }
-
- if (!page_has_function)
- break;
- }
-
- hid_info(hdev, "%s: Done with PDT scan.\n", __func__);
- retval = 0;
-
-error_exit:
- return retval;
-}
-
-#define RMI_DEVICE_F01_BASIC_QUERY_LEN 11
-
-static int rmi_populate_f01(struct hid_device *hdev)
-{
- struct rmi_data *data = hid_get_drvdata(hdev);
- u8 basic_queries[RMI_DEVICE_F01_BASIC_QUERY_LEN];
- u8 info[3];
- int ret;
- bool has_query42;
- bool has_lts;
- bool has_sensor_id;
- bool has_ds4_queries = false;
- bool has_build_id_query = false;
- bool has_package_id_query = false;
- u16 query_offset = data->f01.query_base_addr;
- u16 prod_info_addr;
- u8 ds4_query_len;
-
- ret = rmi_read_block(hdev, query_offset, basic_queries,
- RMI_DEVICE_F01_BASIC_QUERY_LEN);
- if (ret) {
- hid_err(hdev, "Can not read basic queries from Function 0x1.\n");
- return ret;
- }
-
- has_lts = !!(basic_queries[0] & BIT(2));
- has_sensor_id = !!(basic_queries[1] & BIT(3));
- has_query42 = !!(basic_queries[1] & BIT(7));
-
- query_offset += 11;
- prod_info_addr = query_offset + 6;
- query_offset += 10;
-
- if (has_lts)
- query_offset += 20;
-
- if (has_sensor_id)
- query_offset++;
-
- if (has_query42) {
- ret = rmi_read(hdev, query_offset, info);
- if (ret) {
- hid_err(hdev, "Can not read query42.\n");
- return ret;
- }
- has_ds4_queries = !!(info[0] & BIT(0));
- query_offset++;
- }
-
- if (has_ds4_queries) {
- ret = rmi_read(hdev, query_offset, &ds4_query_len);
- if (ret) {
- hid_err(hdev, "Can not read DS4 Query length.\n");
- return ret;
- }
- query_offset++;
-
- if (ds4_query_len > 0) {
- ret = rmi_read(hdev, query_offset, info);
- if (ret) {
- hid_err(hdev, "Can not read DS4 query.\n");
- return ret;
- }
-
- has_package_id_query = !!(info[0] & BIT(0));
- has_build_id_query = !!(info[0] & BIT(1));
- }
- }
-
- if (has_package_id_query)
- prod_info_addr++;
-
- if (has_build_id_query) {
- ret = rmi_read_block(hdev, prod_info_addr, info, 3);
- if (ret) {
- hid_err(hdev, "Can not read product info.\n");
- return ret;
- }
-
- data->firmware_id = info[1] << 8 | info[0];
- data->firmware_id += info[2] * 65536;
- }
-
- ret = rmi_read_block(hdev, data->f01.control_base_addr, info,
- 2);
-
- if (ret) {
- hid_err(hdev, "can not read f01 ctrl registers\n");
- return ret;
- }
-
- data->f01_ctrl0 = info[0];
-
- if (!info[1]) {
- /*
- * Do to a firmware bug in some touchpads the F01 interrupt
- * enable control register will be cleared on reset.
- * This will stop the touchpad from reporting data, so
- * if F01 CTRL1 is 0 then we need to explicitly enable
- * interrupts for the functions we want data for.
- */
- data->restore_interrupt_mask = true;
-
- ret = rmi_write(hdev, data->f01.control_base_addr + 1,
- &data->interrupt_enable_mask);
- if (ret) {
- hid_err(hdev, "can not write to control reg 1: %d.\n",
- ret);
- return ret;
- }
- }
-
- return 0;
-}
-
-static int rmi_populate_f11(struct hid_device *hdev)
-{
- struct rmi_data *data = hid_get_drvdata(hdev);
- u8 buf[20];
- int ret;
- bool has_query9;
- bool has_query10 = false;
- bool has_query11;
- bool has_query12;
- bool has_query27;
- bool has_query28;
- bool has_query36 = false;
- bool has_physical_props;
- bool has_gestures;
- bool has_rel;
- bool has_data40 = false;
- bool has_dribble = false;
- bool has_palm_detect = false;
- unsigned x_size, y_size;
- u16 query_offset;
-
- if (!data->f11.query_base_addr) {
- hid_err(hdev, "No 2D sensor found, giving up.\n");
- return -ENODEV;
- }
- /* query 0 contains some useful information */
- ret = rmi_read(hdev, data->f11.query_base_addr, buf);
- if (ret) {
- hid_err(hdev, "can not get query 0: %d.\n", ret);
- return ret;
- }
- has_query9 = !!(buf[0] & BIT(3));
- has_query11 = !!(buf[0] & BIT(4));
- has_query12 = !!(buf[0] & BIT(5));
- has_query27 = !!(buf[0] & BIT(6));
- has_query28 = !!(buf[0] & BIT(7));
-
- /* query 1 to get the max number of fingers */
- ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf);
- if (ret) {
- hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret);
- return ret;
- }
- data->max_fingers = (buf[0] & 0x07) + 1;
- if (data->max_fingers > 5)
- data->max_fingers = 10;
-
- data->f11.report_size = data->max_fingers * 5 +
- DIV_ROUND_UP(data->max_fingers, 4);
-
- if (!(buf[0] & BIT(4))) {
- hid_err(hdev, "No absolute events, giving up.\n");
- return -ENODEV;
- }
-
- has_rel = !!(buf[0] & BIT(3));
- has_gestures = !!(buf[0] & BIT(5));
-
- ret = rmi_read(hdev, data->f11.query_base_addr + 5, buf);
- if (ret) {
- hid_err(hdev, "can not get absolute data sources: %d.\n", ret);
- return ret;
- }
-
- has_dribble = !!(buf[0] & BIT(4));
-
- /*
- * At least 4 queries are guaranteed to be present in F11
- * +1 for query 5 which is present since absolute events are
- * reported and +1 for query 12.
- */
- query_offset = 6;
-
- if (has_rel)
- ++query_offset; /* query 6 is present */
-
- if (has_gestures) {
- /* query 8 to find out if query 10 exists */
- ret = rmi_read(hdev,
- data->f11.query_base_addr + query_offset + 1, buf);
- if (ret) {
- hid_err(hdev, "can not read gesture information: %d.\n",
- ret);
- return ret;
- }
- has_palm_detect = !!(buf[0] & BIT(0));
- has_query10 = !!(buf[0] & BIT(2));
-
- query_offset += 2; /* query 7 and 8 are present */
- }
-
- if (has_query9)
- ++query_offset;
-
- if (has_query10)
- ++query_offset;
-
- if (has_query11)
- ++query_offset;
-
- /* query 12 to know if the physical properties are reported */
- if (has_query12) {
- ret = rmi_read(hdev, data->f11.query_base_addr
- + query_offset, buf);
- if (ret) {
- hid_err(hdev, "can not get query 12: %d.\n", ret);
- return ret;
- }
- has_physical_props = !!(buf[0] & BIT(5));
-
- if (has_physical_props) {
- query_offset += 1;
- ret = rmi_read_block(hdev,
- data->f11.query_base_addr
- + query_offset, buf, 4);
- if (ret) {
- hid_err(hdev, "can not read query 15-18: %d.\n",
- ret);
- return ret;
- }
-
- x_size = buf[0] | (buf[1] << 8);
- y_size = buf[2] | (buf[3] << 8);
-
- data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10);
- data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10);
-
- hid_info(hdev, "%s: size in mm: %d x %d\n",
- __func__, data->x_size_mm, data->y_size_mm);
-
- /*
- * query 15 - 18 contain the size of the sensor
- * and query 19 - 26 contain bezel dimensions
- */
- query_offset += 12;
- }
- }
-
- if (has_query27)
- ++query_offset;
-
- if (has_query28) {
- ret = rmi_read(hdev, data->f11.query_base_addr
- + query_offset, buf);
- if (ret) {
- hid_err(hdev, "can not get query 28: %d.\n", ret);
- return ret;
- }
-
- has_query36 = !!(buf[0] & BIT(6));
- }
-
- if (has_query36) {
- query_offset += 2;
- ret = rmi_read(hdev, data->f11.query_base_addr
- + query_offset, buf);
- if (ret) {
- hid_err(hdev, "can not get query 36: %d.\n", ret);
- return ret;
- }
-
- has_data40 = !!(buf[0] & BIT(5));
- }
-
-
- if (has_data40)
- data->f11.report_size += data->max_fingers * 2;
+ if (!(data->device_flags & RMI_DEVICE))
+ return 0;
- ret = rmi_read_block(hdev, data->f11.control_base_addr,
- data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT);
+ ret = rmi_driver_suspend(rmi_dev);
if (ret) {
- hid_err(hdev, "can not read ctrl block of size 11: %d.\n", ret);
+ hid_warn(hdev, "Failed to suspend device: %d\n", ret);
return ret;
}
- /* data->f11_ctrl_regs now contains valid register data */
- data->read_f11_ctrl_regs = true;
-
- data->max_x = data->f11_ctrl_regs[6] | (data->f11_ctrl_regs[7] << 8);
- data->max_y = data->f11_ctrl_regs[8] | (data->f11_ctrl_regs[9] << 8);
-
- if (has_dribble) {
- data->f11_ctrl_regs[0] = data->f11_ctrl_regs[0] & ~BIT(6);
- ret = rmi_write(hdev, data->f11.control_base_addr,
- data->f11_ctrl_regs);
- if (ret) {
- hid_err(hdev, "can not write to control reg 0: %d.\n",
- ret);
- return ret;
- }
- }
-
- if (has_palm_detect) {
- data->f11_ctrl_regs[11] = data->f11_ctrl_regs[11] & ~BIT(0);
- ret = rmi_write(hdev, data->f11.control_base_addr + 11,
- &data->f11_ctrl_regs[11]);
- if (ret) {
- hid_err(hdev, "can not write to control reg 11: %d.\n",
- ret);
- return ret;
- }
- }
-
return 0;
}
-static int rmi_populate_f30(struct hid_device *hdev)
+static int rmi_post_resume(struct hid_device *hdev)
{
struct rmi_data *data = hid_get_drvdata(hdev);
- u8 buf[20];
+ struct rmi_device *rmi_dev = data->xport.rmi_dev;
int ret;
- bool has_gpio, has_led;
- unsigned bytes_per_ctrl;
- u8 ctrl2_addr;
- int ctrl2_3_length;
- int i;
- /* function F30 is for physical buttons */
- if (!data->f30.query_base_addr) {
- hid_err(hdev, "No GPIO/LEDs found, giving up.\n");
- return -ENODEV;
- }
+ if (!(data->device_flags & RMI_DEVICE))
+ return 0;
- ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2);
- if (ret) {
- hid_err(hdev, "can not get F30 query registers: %d.\n", ret);
+ ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
+ if (ret)
return ret;
- }
-
- has_gpio = !!(buf[0] & BIT(3));
- has_led = !!(buf[0] & BIT(2));
- data->gpio_led_count = buf[1] & 0x1f;
-
- /* retrieve ctrl 2 & 3 registers */
- bytes_per_ctrl = (data->gpio_led_count + 7) / 8;
- /* Ctrl0 is present only if both has_gpio and has_led are set*/
- ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0;
- /* Ctrl1 is always be present */
- ctrl2_addr += bytes_per_ctrl;
- ctrl2_3_length = 2 * bytes_per_ctrl;
- data->f30.report_size = bytes_per_ctrl;
-
- ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr,
- buf, ctrl2_3_length);
+ ret = rmi_driver_resume(rmi_dev);
if (ret) {
- hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n",
- ctrl2_3_length, ret);
+ hid_warn(hdev, "Failed to resume device: %d\n", ret);
return ret;
}
- for (i = 0; i < data->gpio_led_count; i++) {
- int byte_position = i >> 3;
- int bit_position = i & 0x07;
- u8 dir_byte = buf[byte_position];
- u8 data_byte = buf[byte_position + bytes_per_ctrl];
- bool dir = (dir_byte >> bit_position) & BIT(0);
- bool dat = (data_byte >> bit_position) & BIT(0);
-
- if (dir == 0) {
- /* input mode */
- if (dat) {
- /* actual buttons have pull up resistor */
- data->button_count++;
- set_bit(i, &data->button_mask);
- set_bit(i, &data->button_state_mask);
- }
- }
-
- }
-
return 0;
}
+#endif /* CONFIG_PM */
-static int rmi_populate(struct hid_device *hdev)
+static int rmi_hid_reset(struct rmi_transport_dev *xport, u16 reset_addr)
{
- struct rmi_data *data = hid_get_drvdata(hdev);
- int ret;
-
- ret = rmi_scan_pdt(hdev);
- if (ret) {
- hid_err(hdev, "PDT scan failed with code %d.\n", ret);
- return ret;
- }
-
- ret = rmi_populate_f01(hdev);
- if (ret) {
- hid_err(hdev, "Error while initializing F01 (%d).\n", ret);
- return ret;
- }
-
- ret = rmi_populate_f11(hdev);
- if (ret) {
- hid_err(hdev, "Error while initializing F11 (%d).\n", ret);
- return ret;
- }
-
- if (!(data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)) {
- ret = rmi_populate_f30(hdev);
- if (ret)
- hid_warn(hdev, "Error while initializing F30 (%d).\n", ret);
- }
+ struct rmi_data *data = container_of(xport, struct rmi_data, xport);
+ struct hid_device *hdev = data->hdev;
- return 0;
+ return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
}
static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
{
struct rmi_data *data = hid_get_drvdata(hdev);
struct input_dev *input = hi->input;
- int ret;
- int res_x, res_y, i;
+ int ret = 0;
+
+ if (!(data->device_flags & RMI_DEVICE))
+ return 0;
- data->input = input;
+ data->xport.input = input;
hid_dbg(hdev, "Opening low level driver\n");
ret = hid_hw_open(hdev);
if (ret)
return ret;
- if (!(data->device_flags & RMI_DEVICE))
- return 0;
-
/* Allow incoming hid reports */
hid_device_io_start(hdev);
@@ -1205,40 +474,10 @@ static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
goto exit;
}
- ret = rmi_populate(hdev);
- if (ret)
- goto exit;
-
- hid_info(hdev, "firmware id: %ld\n", data->firmware_id);
-
- __set_bit(EV_ABS, input->evbit);
- input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0);
- input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0);
-
- if (data->x_size_mm && data->y_size_mm) {
- res_x = (data->max_x - 1) / data->x_size_mm;
- res_y = (data->max_y - 1) / data->y_size_mm;
-
- input_abs_set_res(input, ABS_MT_POSITION_X, res_x);
- input_abs_set_res(input, ABS_MT_POSITION_Y, res_y);
- }
-
- input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
- input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0);
- input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0);
- input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0);
-
- ret = input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER);
- if (ret < 0)
+ ret = rmi_register_transport_device(&data->xport);
+ if (ret < 0) {
+ dev_err(&hdev->dev, "failed to register transport driver\n");
goto exit;
-
- if (data->button_count) {
- __set_bit(EV_KEY, input->evbit);
- for (i = 0; i < data->button_count; i++)
- __set_bit(BTN_LEFT + i, input->keybit);
-
- if (data->button_count == 1)
- __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
}
set_bit(RMI_STARTED, &data->flags);
@@ -1287,6 +526,26 @@ static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type,
return 0;
}
+static struct rmi_2d_sensor_platform_data rmi_hid_2d_sensor_data = {
+ .sensor_type = rmi_sensor_touchpad,
+ .axis_align.flip_y = true,
+ .kernel_tracking = true,
+};
+
+static struct rmi_f30_data rmi_hid_f30_data = {
+};
+
+static struct rmi_device_platform_data rmi_hid_pdata = {
+ .sensor_pdata = &rmi_hid_2d_sensor_data,
+ .f30_data = &rmi_hid_f30_data,
+};
+
+static const struct rmi_transport_ops hid_rmi_ops = {
+ .write_block = rmi_hid_write_block,
+ .read_block = rmi_hid_read_block,
+ .reset = rmi_hid_reset,
+};
+
static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct rmi_data *data = NULL;
@@ -1358,6 +617,14 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
mutex_init(&data->page_mutex);
+ if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)
+ rmi_hid_pdata.f30_data->disable = true;
+
+ data->xport.dev = hdev->dev.parent;
+ data->xport.pdata = rmi_hid_pdata;
+ data->xport.proto_name = "hid";
+ data->xport.ops = &hid_rmi_ops;
+
start:
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
@@ -1365,17 +632,6 @@ start:
return ret;
}
- if ((data->device_flags & RMI_DEVICE) &&
- !test_bit(RMI_STARTED, &data->flags))
- /*
- * The device maybe in the bootloader if rmi_input_configured
- * failed to find F11 in the PDT. Print an error, but don't
- * return an error from rmi_probe so that hidraw will be
- * accessible from userspace. That way a userspace tool
- * can be used to reload working firmware on the touchpad.
- */
- hid_err(hdev, "Device failed to be properly configured\n");
-
return 0;
}
@@ -1384,6 +640,7 @@ static void rmi_remove(struct hid_device *hdev)
struct rmi_data *hdata = hid_get_drvdata(hdev);
clear_bit(RMI_STARTED, &hdata->flags);
+ rmi_unregister_transport_device(&hdata->xport);
hid_hw_stop(hdev);
}
@@ -1408,7 +665,7 @@ static struct hid_driver rmi_driver = {
#ifdef CONFIG_PM
.suspend = rmi_suspend,
.resume = rmi_post_resume,
- .reset_resume = rmi_post_reset,
+ .reset_resume = rmi_post_resume,
#endif
};
--
2.5.0
Powered by blists - more mailing lists