| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1455191794-6065-2-git-send-email-ldewangan@nvidia.com>
Date: Thu, 11 Feb 2016 17:26:27 +0530
From: Laxman Dewangan <ldewangan@...dia.com>
To: <robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<linus.walleij@...aro.org>, <gnurou@...il.com>,
<lee.jones@...aro.org>, <broonie@...nel.org>,
<a.zummo@...ertech.it>, <alexandre.belloni@...e-electrons.com>
CC: <lgirdwood@...il.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-gpio@...r.kernel.org>,
<rtc-linux@...glegroups.com>, <swarren@...dia.com>,
<treding@...dia.com>, <k.kozlowski@...sung.com>,
Laxman Dewangan <ldewangan@...dia.com>
Subject: [PATCH V8 1/8] mfd: add device-tree binding doc for PMIC max77620/max20024
The MAXIM PMIC MAX77620 and MAX20024 are power management IC
which supports RTC, GPIO, DCDC/LDO regulators, interrupt,
watchdog etc.
Add DT binding document for the different functionality of
this device.
Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
Acked-by: Rob Herring <robh@...nel.org>
---
Changes from V1:
- Added units in some of properties.
- Change the boolean property to tristate type and detail some of
properties.
Change from V2:
- added unit in period related dt property.
Change from V3: None
- Added Rob's ack.
Changes from V4:
- A- Provide more details in the dt binding doc.
- Take care of fps nodes.
- Split the submodule's DT binding doc on respective folder.
- Drop the battery charger and low battery binding and related code as
it need to go on power driver.
Change from V5:
- None
Change from V6:
-start the patch title with mfd instead of DT: mfd:
Change from V7:
- Better describe the FPS to make more clear.
Documentation/devicetree/bindings/mfd/max77620.txt | 143 +++++++++++++++++++++
include/dt-bindings/mfd/max77620.h | 39 ++++++
2 files changed, 182 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max77620.txt
create mode 100644 include/dt-bindings/mfd/max77620.h
diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
new file mode 100644
index 0000000..2ad44f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77620.txt
@@ -0,0 +1,143 @@
+MAX77620 Power management IC from Maxim Semiconductor.
+
+Required properties:
+-------------------
+- compatible: Must be one of
+ "maxim,max77620"
+ "maxim,max20024".
+- reg: I2C device address.
+
+Optional properties:
+-------------------
+- interrupts: The interrupt on the parent the controller is
+ connected to.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: is <2> and their usage is compliant to the 2 cells
+ variant of <../interrupt-controller/interrupts.txt>
+ IRQ numbers for different interrupt source of MAX77620
+ are defined at dt-bindings/mfd/max77620.h.
+
+Optional subnodes and their properties:
+=======================================
+
+Flexible power sequence configurations:
+--------------------------------------
+The Flexible Power Sequencer (FPS) allows each regulator to power up under
+hardware or software control. Additionally, each regulator can power on
+independently or among a group of other regulators with an adjustable power-up
+and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can be programmed
+to be part of a sequence allowing external regulators to be sequenced along
+with internal regulators. 32KHz clock can be programmed to be part of a
+sequence.
+
+The flexible sequencing structure consists of two hardware enable inputs
+(EN0, EN1), and 3 master sequencing timers called FPS0, FPS1 and FPS2.
+Each master sequencing timer is programmable through its configuration
+register to have a hardware enable source (EN1 or EN2) or a software enable
+source (SW). When enabled/disabled, the master sequencing timer generates
+eight sequencing events on different time periods called slots. The time
+period between each event is programmable within the configuration register.
+Each regulator, GPIO1, GPIO2, GPIO3, and 32KHz clock has a flexible power
+sequence slave register which allows its enable source to be specified as
+a flexible power sequencer timer or a software bit. When a FPS source of
+regulators, GPIOs and clocks specifies the enable source to be a flexible
+power sequencer, the power up and power down delays can be specified in
+the regulators, GPIOs and clocks flexible power sequencer configuration
+registers.
+
+When FPS event cleared (set to LOW), regulators, GPIOs and 32KHz
+clock are set into following state at the sequencing event that
+corresponds to its flexible sequencer configuration register.
+ Sleep state: In this state, regulators, GPIOs
+ and 32KHz clock get disabled at
+ the sequencing event.
+ Global Low Power Mode (GLPM): In this state, regulators are set in
+ low power mode at the sequencing event.
+
+The configuration parameters of FPS is provided through sub-node "fps"
+and their child for FPS specific. The child node name for FPS are "fps0",
+"fps1", and "fps2" for FPS0, FPS1 and FPS2 respectively.
+
+The FPS configurations like FPS source, power up and power down slots for
+regulators, GPIOs and 32kHz clocks are provided in their respective
+configuration nodes which is explained in respective sub-system DT
+binding document.
+
+There is need for different FPS configuration parameters based on system
+state like when system state changed from active to suspend or active to
+power off (shutdown).
+
+Optional properties:
+-------------------
+-maxim,fps-event-source: u32, FPS event source like external
+ hardware input to PMIC i.e. EN0, EN1 or
+ software (SW).
+ The macros are defined on
+ dt-bindings/mfd/max77620.h
+ for different control source.
+ - MAX77620_FPS_EVENT_SRC_EN0
+ for hardware input pin EN0.
+ - MAX77620_FPS_EVENT_SRC_EN1
+ for hardware input pin EN1.
+ - MAX77620_FPS_EVENT_SRC_SW
+ for software control.
+
+-maxim,shutdown-fps-time-period-us: u32, FPS time period in microseconds
+ when system enters in to shutdown
+ state.
+
+-maxim,suspend-fps-time-period-us: u32, FPS time period in microseconds
+ when system enters in to suspend state.
+
+-maxim,device-state-on-disabled-event: u32, describe the PMIC state when FPS
+ event cleared (set to LOW) whether it
+ should go to sleep state or low-power
+ state. Following are valid values:
+ - MAX77620_FPS_INACTIVE_STATE_SLEEP
+ to set the PMIC state to sleep.
+ - MAX77620_FPS_INACTIVE_STATE_LOW_POWER
+ to set the PMIC state to low
+ power.
+ Absence of this property or other value
+ will not change device state when FPS
+ event get cleared.
+
+Here supported time periods by device in microseconds are as follows:
+MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds.
+MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
+
+For DT binding details of different sub modules like GPIO, pincontrol,
+regulator, power, please refer respective device-tree binding document
+under their respective sub-system directories.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+
+max77620@3c {
+ compatible = "maxim,max77620";
+ reg = <0x3c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <0 86 IRQ_TYPE_NONE>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ fps {
+ fps0 {
+ maxim,shutdown-fps-time-period-us = <1280>;
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+ };
+
+ fps1 {
+ maxim,shutdown-fps-time-period-us = <1280>;
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ };
+
+ fps2 {
+ maxim,shutdown-fps-time-period-us = <1280>;
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_SW>;
+ };
+ };
+};
diff --git a/include/dt-bindings/mfd/max77620.h b/include/dt-bindings/mfd/max77620.h
new file mode 100644
index 0000000..b911a07
--- /dev/null
+++ b/include/dt-bindings/mfd/max77620.h
@@ -0,0 +1,39 @@
+/*
+ * This header provides macros for MAXIM MAX77620 device bindings.
+ *
+ * Copyright (c) 2016, NVIDIA Corporation.
+ * Author: Laxman Dewangan <ldewangan@...dia.com>
+ */
+
+#ifndef _DT_BINDINGS_MFD_MAX77620_H
+#define _DT_BINDINGS_MFD_MAX77620_H
+
+/* MAX77620 interrupts */
+#define MAX77620_IRQ_TOP_GLBL 0 /* Low-Battery */
+#define MAX77620_IRQ_TOP_SD 1 /* SD power fail */
+#define MAX77620_IRQ_TOP_LDO 2 /* LDO power fail */
+#define MAX77620_IRQ_TOP_GPIO 3 /* GPIO internal int to MAX77620 */
+#define MAX77620_IRQ_TOP_RTC 4 /* RTC */
+#define MAX77620_IRQ_TOP_32K 5 /* 32kHz oscillator */
+#define MAX77620_IRQ_TOP_ONOFF 6 /* ON/OFF oscillator */
+#define MAX77620_IRQ_LBT_MBATLOW 7 /* Thermal alarm status, > 120C */
+#define MAX77620_IRQ_LBT_TJALRM1 8 /* Thermal alarm status, > 120C */
+#define MAX77620_IRQ_LBT_TJALRM2 9 /* Thermal alarm status, > 140C */
+
+/* FPS event source */
+#define MAX77620_FPS_EVENT_SRC_EN0 0
+#define MAX77620_FPS_EVENT_SRC_EN1 1
+#define MAX77620_FPS_EVENT_SRC_SW 2
+
+/* Device state when FPS event LOW */
+#define MAX77620_FPS_INACTIVE_STATE_SLEEP 0
+#define MAX77620_FPS_INACTIVE_STATE_LOW_POWER 1
+
+/* FPS source */
+#define MAX77620_FPS_SRC_0 0
+#define MAX77620_FPS_SRC_1 1
+#define MAX77620_FPS_SRC_2 2
+#define MAX77620_FPS_SRC_NONE 3
+#define MAX77620_FPS_SRC_DEF 4
+
+#endif
--
2.1.4
Powered by blists - more mailing lists