lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1455206297-6002-2-git-send-email-joshua.henderson@microchip.com>
Date:	Thu, 11 Feb 2016 08:58:17 -0700
From:	Joshua Henderson <joshua.henderson@...rochip.com>
To:	<linux-kernel@...r.kernel.org>
CC:	Cristian Birsan <cristian.birsan@...rochip.com>,
	Joshua Henderson <joshua.henderson@...rochip.com>,
	Felipe Balbi <balbi@...nel.org>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	<linux-usb@...r.kernel.org>
Subject: [PATCH v3 2/2] usb: musb: Fix DMA desired mode for Mentor DMA engine

From: Cristian Birsan <cristian.birsan@...rochip.com>

Commit 754fe4a92c07 ("usb: musb: Remove ifdefs for TX DMA for musb_host.c")
introduces a problem setting the desired channel mode for the Mentor DMA
engine.

There is a case where an address is incorrectly assigned to the DMA
channel desired mode when it should instead be assigned the actual mode
value. This results in the value of channel->desired_mode not being
correct.

Signed-off-by: Cristian Birsan <cristian.birsan@...rochip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@...rochip.com>
---
Changes since v2:
	- Fix wording in commit message.
Changes since v1:
	- Fix commit comment citing the cause of the regression.
---
 drivers/usb/musb/musb_host.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 6a81066..0803061 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -662,7 +662,7 @@ static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma,
 		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
 		csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
 	}
-	channel->desired_mode = mode;
+	channel->desired_mode = *mode;
 	musb_writew(epio, MUSB_TXCSR, csr);
 
 	return 0;
-- 
1.7.9.5

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ