[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160211165935.GD20693@x1>
Date: Thu, 11 Feb 2016 16:59:35 +0000
From: Lee Jones <lee.jones@...aro.org>
To: Chen Feng <puck.chen@...ilicon.com>
Cc: kong.kongxinwei@...ilicon.com, w.f@...wei.com,
linux-kernel@...r.kernel.org, lgirdwood@...il.com,
broonie@...nel.org, yudongbin@...ilicon.com,
saberlily.xia@...ilicon.com, suzhuangluan@...ilicon.com,
xuyiping@...ilicon.com, z.liuxinliang@...ilicon.com,
puck.chenfeng@...il.com, weidong2@...ilicon.com,
puck.chen@...mail.com, qijiwen@...ilicon.com,
peter.panshilin@...ilicon.com, dan.zhao@...ilicon.com,
linuxarm@...wei.com, haojian.zhuang@...aro.org
Subject: Re: [RESEND v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC
On Mon, 01 Feb 2016, Chen Feng wrote:
> DT bindings for hisilicon hi655x MFD PMIC chip.
>
> Signed-off-by: Chen Feng <puck.chen@...ilicon.com>
> Signed-off-by: Fei Wang <w.f@...wei.com>
> Signed-off-by: Xinwei Kong <kong.kongxinwei@...ilicon.com>
> Reviewed-by: Haojian Zhuang <haojian.zhuang@...aro.org>
> ---
> .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
> new file mode 100644
> index 0000000..5edc310
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
> @@ -0,0 +1,27 @@
> +Hisilicon hi655x Power Management Integrated Circuit (PMIC)
> +
> +The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
> +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
> +We can use memory-mapped I/O to communicate.
> +
> ++----------------+ +-------------+
> +| | | |
> +| Hi6220 | SSI bus | Hi655x |
> +| |-------------| |
> +| |(REGMAP_MMIO)| |
> ++----------------+ +-------------+
> +
> +Required properties:
> +- compatible: Should be "hisilicon,hi655x-pmic"
> +- reg: Base address of PMIC on hi6220 soc
s/hi6220 soc/Hi6220 SoC/
> +- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
> +- pmic-gpios: The gpio used by PMIC irq.
s/gpio/GPIO/
s/irq/IRQ/
These are always easier to read in this format:
- compatible: Should be "hisilicon,hi655x-pmic"
- reg: Base address of PMIC on hi6220 soc
- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
- pmic-gpios: The gpio used by PMIC irq.
> +Example:
> + pmic: pmic@...00000 {
> + compatible = "hisilicon,hi655x-pmic";
> + reg = <0x0 0xf8000000 0x0 0x1000>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> + }
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists