[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1455162671-16044-11-git-send-email-Suravee.Suthikulpanit@amd.com>
Date: Wed, 10 Feb 2016 21:51:09 -0600
From: Suravee Suthikulpanit <Suravee.Suthikulpanit@....com>
To: <olof@...om.net>, <robh+dt@...nel.org>, <pawel.moll@....com>,
<mark.rutland@....com>, <ijc+devicetree@...lion.org.uk>,
<galak@...eaurora.org>, <arnd@...db.de>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <arm@...nel.org>,
<brijeshkumar.singh@....com>, <thomas.lendacky@....com>,
<leo.duran@....com>
Subject: [PATCH V3 10/12] dtb: amd: Add AMD XGBE device tree file
From: Tom Lendacky <thomas.lendacky@....com>
Add AMD XGBE device tree file, which is available in AMD Seattle RevB.
Signed-off-by: Tom Lendacky <thomas.lendacky@....com>
---
MAINTAINERS | 1 +
arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi | 117 ++++++++++++++++++++++++
2 files changed, 118 insertions(+)
create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index e349a32..9547a68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -685,6 +685,7 @@ M: Tom Lendacky <thomas.lendacky@....com>
L: netdev@...r.kernel.org
S: Supported
F: drivers/net/ethernet/amd/xgbe/
+F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
AMS (Apple Motion Sensor) DRIVER
M: Michael Hanselmann <linux-kernel@...smi.ch>
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
new file mode 100644
index 0000000..8e86319
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -0,0 +1,117 @@
+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+ xgmacclk0_dma_250mhz: clk250mhz_0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk0_dma_250mhz";
+ };
+
+ xgmacclk0_ptp_250mhz: clk250mhz_1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk0_ptp_250mhz";
+ };
+
+ xgmacclk1_dma_250mhz: clk250mhz_2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk1_dma_250mhz";
+ };
+
+ xgmacclk1_ptp_250mhz: clk250mhz_3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk1_ptp_250mhz";
+ };
+
+ xgmac0: xgmac@...00000 {
+ compatible = "amd,xgbe-seattle-v1a";
+ reg = <0 0xe0700000 0 0x80000>,
+ <0 0xe0780000 0 0x80000>,
+ <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+ <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+ <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+ interrupts = <0 325 4>,
+ <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+ <0 323 4>;
+ amd,per-channel-interrupt;
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <18>;
+ amd,serdes-tx-amp = <0>, <0>, <0>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+ mac-address = [ 02 A1 A2 A3 A4 A5 ];
+ clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+ clock-names = "dma_clk", "ptp_clk";
+ phy-mode = "xgmii";
+ #stream-id-cells = <16>;
+ dma-coherent;
+ };
+
+ xgmac1: xgmac@...00000 {
+ compatible = "amd,xgbe-seattle-v1a";
+ reg = <0 0xe0900000 0 0x80000>,
+ <0 0xe0980000 0 0x80000>,
+ <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+ <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+ <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+ interrupts = <0 324 4>,
+ <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+ <0 322 4>;
+ amd,per-channel-interrupt;
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <18>;
+ amd,serdes-tx-amp = <0>, <0>, <0>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+ mac-address = [ 02 B1 B2 B3 B4 B5 ];
+ clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+ clock-names = "dma_clk", "ptp_clk";
+ phy-mode = "xgmii";
+ #stream-id-cells = <16>;
+ dma-coherent;
+ };
+
+ xgmac0_smmu: smmu@...00000 {
+ compatible = "arm,mmu-401";
+ reg = <0 0xe0600000 0 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = /* Uses combined intr for both
+ * global and context
+ */
+ <0 336 4>,
+ <0 336 4>;
+
+ mmu-masters = <&xgmac0
+ 0 1 2 3 4 5 6 7
+ 16 17 18 19 20 21 22 23
+ >;
+ };
+
+ xgmac1_smmu: smmu@...00000 {
+ compatible = "arm,mmu-401";
+ reg = <0 0xe0800000 0 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = /* Uses combined intr for both
+ * global and context
+ */
+ <0 335 4>,
+ <0 335 4>;
+
+ mmu-masters = <&xgmac1
+ 0 1 2 3 4 5 6 7
+ 16 17 18 19 20 21 22 23
+ >;
+ };
--
2.5.0
Powered by blists - more mailing lists