[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56BD23DC.30901@ti.com>
Date: Fri, 12 Feb 2016 09:14:20 +0900
From: "Kim, Milo" <milo.kim@...com>
To: Paul Kocialkowski <contact@...lk.fr>
CC: <linux-kernel@...r.kernel.org>, Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Russell King <linux@....linux.org.uk>,
BenoƮt Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Javier Martinez Canillas <javier@...hile0.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-omap@...r.kernel.org>
Subject: Re: [PATCH v2 1/4] regulator: lp872x: Remove warning about invalid
DVS GPIO
On 2/6/2016 3:42 AM, Paul Kocialkowski wrote:
> Some devices don't hook the DVS pin to a GPIO but to ground or VCC.
> In those cases, it is not a problem to have no DVS GPIO provided, as the current
> code will already switch to software-only DVS selection:
>
> When the DVS GPIO is invalid, lp872x_init_dvs jumps to the set_default_dvs_mode
> label, which instructs the chip not to use the DVS pin at all and do it all in
> software instead (by clearing the LP8720_EXT_DVS_M bit in the
> LP872X_GENERAL_CFG register).
>
> That is reflected later in the code, when setting the bucks (the DVS pin only
> applies to the bucks) by checking for the LP8720_EXT_DVS_M bit on the
> LP872X_GENERAL_CFG register (in lp872x_select_buck_vout_addr) to decide whether
> to use software or hardware DVS selection.
>
> Thus, there is no need to print a warning when the DVS GPIO is invalid.
>
> Signed-off-by: Paul Kocialkowski <contact@...lk.fr>
Acked-by: Milo Kim <milo.kim@...com>
> ---
> drivers/regulator/lp872x.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
> index 19d7584..21c49d8 100644
> --- a/drivers/regulator/lp872x.c
> +++ b/drivers/regulator/lp872x.c
> @@ -738,10 +738,8 @@ static int lp872x_init_dvs(struct lp872x *lp)
> goto set_default_dvs_mode;
>
> gpio = dvs->gpio;
> - if (!gpio_is_valid(gpio)) {
> - dev_warn(lp->dev, "invalid gpio: %d\n", gpio);
> + if (!gpio_is_valid(gpio))
> goto set_default_dvs_mode;
> - }
>
> pinstate = dvs->init_state;
> ret = devm_gpio_request_one(lp->dev, gpio, pinstate, "LP872X DVS");
>
Powered by blists - more mailing lists