Message-Id: <00c76bac779ab927eb799db9e1cf8fc86d955857.1455333720.git.dhdang@apm.com>
Date:	Fri, 12 Feb 2016 19:39:26 -0800
From:	Duc Dang <dhdang@....com>
To:	Jassi Brar <jassisinghbrar@...il.com>,
	Mathieu Poirier <mathieu.poirier@...aro.org>,
	Rob Herring <robh@...nel.org>
Cc:	Paul Bolle <pebolle@...cali.nl>, devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	patches@....com, Duc Dang <dhdang@....com>, Feng Kan <fkan@....com>
Subject: [PATCH v6 1/3] mailbox: Add support for APM X-Gene platform mailbox driver

X-Gene mailbox controller provides 8 mailbox channels, with
each channel has a dedicated interrupt line.

Signed-off-by: Feng Kan <fkan@....com>
Signed-off-by: Duc Dang <dhdang@....com>
---
Changes since v5:
	- Add description for struct slimpro_mbox_chan
	and struct slimpro_mbox

Changes since v4:
        - Rebase over v4.5-rc1
        - Fix section mistmatch warning by removing
        __init in slimpro_mbox_probe declaration
        - Correctly print channel number when
        there is no IRQ for that channel

Changes since v3:
        - Rebase over v4.4
        - Remove 'id' in slimpro_mbox_chan structure
        - Remove small functions that are only called once
        and fold them into the other callers
        - Remove void* pointer type cast
        - Relax the number of mailbox IRQs condition
        - Use subsys_initcall to guarantee mailbox driver
        will be registered before any other dependent driver
        is loaded.

 drivers/mailbox/Kconfig                 |   9 +
 drivers/mailbox/Makefile                |   2 +
 drivers/mailbox/mailbox-xgene-slimpro.c | 284 ++++++++++++++++++++++++++++++++
 3 files changed, 295 insertions(+)
 create mode 100644 drivers/mailbox/mailbox-xgene-slimpro.c

diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 546d05f..678e434 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -85,4 +85,13 @@ config MAILBOX_TEST
 	  Test client to help with testing new Controller driver
 	  implementations.
 
+config XGENE_SLIMPRO_MBOX
+	tristate "APM SoC X-Gene SLIMpro Mailbox Controller"
+	depends on ARCH_XGENE
+	help
+	  An implementation of the APM X-Gene Interprocessor Communication
+	  Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller.
+	  It is used to send short messages between ARM64-bit cores and
+	  the SLIMpro Management Engine, primarily for PM. Say Y here if you
+	  want to use the APM X-Gene SLIMpro IPCM support.
 endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 92435ef..b602ef8 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -17,3 +17,5 @@ obj-$(CONFIG_ALTERA_MBOX)	+= mailbox-altera.o
 obj-$(CONFIG_BCM2835_MBOX)	+= bcm2835-mailbox.o
 
 obj-$(CONFIG_STI_MBOX)		+= mailbox-sti.o
+
+obj-$(CONFIG_XGENE_SLIMPRO_MBOX) += mailbox-xgene-slimpro.o
diff --git a/drivers/mailbox/mailbox-xgene-slimpro.c b/drivers/mailbox/mailbox-xgene-slimpro.c
new file mode 100644
index 0000000..b5f5106
--- /dev/null
+++ b/drivers/mailbox/mailbox-xgene-slimpro.c
@@ -0,0 +1,284 @@
+/*
+ * APM X-Gene SLIMpro MailBox Driver
+ *
+ * Copyright (c) 2015, Applied Micro Circuits Corporation
+ * Author: Feng Kan fkan@....com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define MBOX_CON_NAME			"slimpro-mbox"
+#define MBOX_REG_SET_OFFSET		0x1000
+#define MBOX_CNT			8
+#define MBOX_STATUS_AVAIL_MASK		BIT(16)
+#define MBOX_STATUS_ACK_MASK		BIT(0)
+
+/* Configuration and Status Registers */
+#define REG_DB_IN		0x00
+#define REG_DB_DIN0		0x04
+#define REG_DB_DIN1		0x08
+#define REG_DB_OUT		0x10
+#define REG_DB_DOUT0		0x14
+#define REG_DB_DOUT1		0x18
+#define REG_DB_STAT		0x20
+#define REG_DB_STATMASK		0x24
+
+/**
+ * X-Gene SlimPRO mailbox channel information
+ *
+ * @dev:	Device to which it is attached
+ * @chan:	Pointer to mailbox communication channel
+ * @reg:	Base address to access channel registers
+ * @irq:	Interrupt number of the channel
+ * @rx_msg:	Received message storage
+ */
+struct slimpro_mbox_chan {
+	struct device		*dev;
+	struct mbox_chan	*chan;
+	void __iomem		*reg;
+	int			irq;
+	u32			rx_msg[3];
+};
+
+/**
+ * X-Gene SlimPRO Mailbox controller data
+ *
+ * X-Gene SlimPRO Mailbox controller has 8 commnunication channels.
+ * Each channel has a separate IRQ number assgined to it.
+ *
+ * @mb_ctrl:	Representation of the commnunication channel controller
+ * @mc:		Array of SlimPRO mailbox channels of the controller
+ * @chans:	Array of mailbox communication channels
+ *
+ */
+struct slimpro_mbox {
+	struct mbox_controller		mb_ctrl;
+	struct slimpro_mbox_chan	mc[MBOX_CNT];
+	struct mbox_chan		chans[MBOX_CNT];
+};
+
+static void mb_chan_send_msg(struct slimpro_mbox_chan *mb_chan, u32 *msg)
+{
+	writel(msg[1], mb_chan->reg + REG_DB_DOUT0);
+	writel(msg[2], mb_chan->reg + REG_DB_DOUT1);
+	writel(msg[0], mb_chan->reg + REG_DB_OUT);
+}
+
+static void mb_chan_recv_msg(struct slimpro_mbox_chan *mb_chan)
+{
+	mb_chan->rx_msg[1] = readl(mb_chan->reg + REG_DB_DIN0);
+	mb_chan->rx_msg[2] = readl(mb_chan->reg + REG_DB_DIN1);
+	mb_chan->rx_msg[0] = readl(mb_chan->reg + REG_DB_IN);
+}
+
+static int mb_chan_status_ack(struct slimpro_mbox_chan *mb_chan)
+{
+	u32 val = readl(mb_chan->reg + REG_DB_STAT);
+
+	if (val & MBOX_STATUS_ACK_MASK) {
+		writel(MBOX_STATUS_ACK_MASK, mb_chan->reg + REG_DB_STAT);
+		return 1;
+	}
+	return 0;
+}
+
+static int mb_chan_status_avail(struct slimpro_mbox_chan *mb_chan)
+{
+	u32 val = readl(mb_chan->reg + REG_DB_STAT);
+
+	if (val & MBOX_STATUS_AVAIL_MASK) {
+		mb_chan_recv_msg(mb_chan);
+		writel(MBOX_STATUS_AVAIL_MASK, mb_chan->reg + REG_DB_STAT);
+		return 1;
+	}
+	return 0;
+}
+
+static irqreturn_t slimpro_mbox_irq(int irq, void *id)
+{
+	struct slimpro_mbox_chan *mb_chan = id;
+
+	if (mb_chan_status_ack(mb_chan))
+		mbox_chan_txdone(mb_chan->chan, 0);
+
+	if (mb_chan_status_avail(mb_chan))
+		mbox_chan_received_data(mb_chan->chan, mb_chan->rx_msg);
+
+	return IRQ_HANDLED;
+}
+
+static int slimpro_mbox_send_data(struct mbox_chan *chan, void *msg)
+{
+	struct slimpro_mbox_chan *mb_chan = chan->con_priv;
+
+	mb_chan_send_msg(mb_chan, msg);
+	return 0;
+}
+
+static int slimpro_mbox_startup(struct mbox_chan *chan)
+{
+	struct slimpro_mbox_chan *mb_chan = chan->con_priv;
+	int rc;
+	u32 val;
+
+	rc = devm_request_irq(mb_chan->dev, mb_chan->irq, slimpro_mbox_irq, 0,
+			      MBOX_CON_NAME, mb_chan);
+	if (unlikely(rc)) {
+		dev_err(mb_chan->dev, "failed to register mailbox interrupt %d\n",
+			mb_chan->irq);
+		return rc;
+	}
+
+	/* Enable HW interrupt */
+	writel(MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK,
+	       mb_chan->reg + REG_DB_STAT);
+	/* Unmask doorbell status interrupt */
+	val = readl(mb_chan->reg + REG_DB_STATMASK);
+	val &= ~(MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK);
+	writel(val, mb_chan->reg + REG_DB_STATMASK);
+
+	return 0;
+}
+
+static void slimpro_mbox_shutdown(struct mbox_chan *chan)
+{
+	struct slimpro_mbox_chan *mb_chan = chan->con_priv;
+	u32 val;
+
+	/* Mask doorbell status interrupt */
+	val = readl(mb_chan->reg + REG_DB_STATMASK);
+	val |= (MBOX_STATUS_ACK_MASK | MBOX_STATUS_AVAIL_MASK);
+	writel(val, mb_chan->reg + REG_DB_STATMASK);
+
+	devm_free_irq(mb_chan->dev, mb_chan->irq, mb_chan);
+}
+
+static struct mbox_chan_ops slimpro_mbox_ops = {
+	.send_data = slimpro_mbox_send_data,
+	.startup = slimpro_mbox_startup,
+	.shutdown = slimpro_mbox_shutdown,
+};
+
+static int slimpro_mbox_probe(struct platform_device *pdev)
+{
+	struct slimpro_mbox *ctx;
+	struct resource *regs;
+	void __iomem *mb_base;
+	int rc;
+	int i;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(struct slimpro_mbox), GFP_KERNEL);
+	if (IS_ERR(ctx))
+		return PTR_ERR(ctx);
+
+	platform_set_drvdata(pdev, ctx);
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mb_base = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+	if (IS_ERR(mb_base))
+		return PTR_ERR(mb_base);
+
+	/* Setup mailbox links */
+	for (i = 0; i < MBOX_CNT; i++) {
+		ctx->mc[i].irq = platform_get_irq(pdev, i);
+		if (ctx->mc[i].irq < 0) {
+			if (i == 0) {
+				dev_err(&pdev->dev, "no available IRQ\n");
+				return -EINVAL;
+			}
+			dev_info(&pdev->dev, "no IRQ for channel %d\n", i);
+			break;
+		}
+
+		ctx->mc[i].dev = &pdev->dev;
+		ctx->mc[i].reg = mb_base + i * MBOX_REG_SET_OFFSET;
+		ctx->mc[i].chan = &ctx->chans[i];
+		ctx->chans[i].con_priv = &ctx->mc[i];
+	}
+
+	/* Setup mailbox controller */
+	ctx->mb_ctrl.dev = &pdev->dev;
+	ctx->mb_ctrl.chans = ctx->chans;
+	ctx->mb_ctrl.txdone_irq = true;
+	ctx->mb_ctrl.ops = &slimpro_mbox_ops;
+	ctx->mb_ctrl.num_chans = i;
+
+	rc = mbox_controller_register(&ctx->mb_ctrl);
+	if (rc) {
+		dev_err(&pdev->dev,
+			"APM X-Gene SLIMpro MailBox register failed:%d\n", rc);
+		return rc;
+	}
+
+	dev_info(&pdev->dev, "APM X-Gene SLIMpro MailBox registered\n");
+	return 0;
+}
+
+static int slimpro_mbox_remove(struct platform_device *pdev)
+{
+	struct slimpro_mbox *smb = platform_get_drvdata(pdev);
+
+	mbox_controller_unregister(&smb->mb_ctrl);
+	return 0;
+}
+
+static const struct of_device_id slimpro_of_match[] = {
+	{.compatible = "apm,xgene-slimpro-mbox" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, slimpro_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id slimpro_acpi_ids[] = {
+	{"APMC0D01", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, slimpro_acpi_ids);
+#endif
+
+static struct platform_driver slimpro_mbox_driver = {
+	.probe	= slimpro_mbox_probe,
+	.remove = slimpro_mbox_remove,
+	.driver	= {
+		.name = "xgene-slimpro-mbox",
+		.of_match_table = of_match_ptr(slimpro_of_match),
+		.acpi_match_table = ACPI_PTR(slimpro_acpi_ids)
+	},
+};
+
+static int __init slimpro_mbox_init(void)
+{
+	return platform_driver_register(&slimpro_mbox_driver);
+}
+
+static void __exit slimpro_mbox_exit(void)
+{
+	platform_driver_unregister(&slimpro_mbox_driver);
+}
+
+subsys_initcall(slimpro_mbox_init);
+module_exit(slimpro_mbox_exit);
+
+MODULE_DESCRIPTION("APM X-Gene SLIMpro Mailbox Driver");
+MODULE_LICENSE("GPL");
-- 
1.9.1

Powered by blists - more mailing lists