[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <56BFDAA2.2050105@hisilicon.com>
Date: Sun, 14 Feb 2016 09:38:42 +0800
From: Chen Feng <puck.chen@...ilicon.com>
To: Lee Jones <lee.jones@...aro.org>
CC: <kong.kongxinwei@...ilicon.com>, <w.f@...wei.com>,
<linux-kernel@...r.kernel.org>, <lgirdwood@...il.com>,
<broonie@...nel.org>, <yudongbin@...ilicon.com>,
<saberlily.xia@...ilicon.com>, <suzhuangluan@...ilicon.com>,
<xuyiping@...ilicon.com>, <z.liuxinliang@...ilicon.com>,
<puck.chenfeng@...il.com>, <weidong2@...ilicon.com>,
<puck.chen@...mail.com>, <qijiwen@...ilicon.com>,
<peter.panshilin@...ilicon.com>, <dan.zhao@...ilicon.com>,
<linuxarm@...wei.com>, <haojian.zhuang@...aro.org>
Subject: Re: [RESEND v7 1/5] mfd: hi655x: Add document for mfd hi665x PMIC
Thanks for your review.
On 2016/2/12 0:59, Lee Jones wrote:
> On Mon, 01 Feb 2016, Chen Feng wrote:
>
>> DT bindings for hisilicon hi655x MFD PMIC chip.
>>
>> Signed-off-by: Chen Feng <puck.chen@...ilicon.com>
>> Signed-off-by: Fei Wang <w.f@...wei.com>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@...ilicon.com>
>> Reviewed-by: Haojian Zhuang <haojian.zhuang@...aro.org>
>> ---
>> .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 27 ++++++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> new file mode 100644
>> index 0000000..5edc310
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> @@ -0,0 +1,27 @@
>> +Hisilicon hi655x Power Management Integrated Circuit (PMIC)
>> +
>> +The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
>> +Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
>> +We can use memory-mapped I/O to communicate.
>> +
>> ++----------------+ +-------------+
>> +| | | |
>> +| Hi6220 | SSI bus | Hi655x |
>> +| |-------------| |
>> +| |(REGMAP_MMIO)| |
>> ++----------------+ +-------------+
>> +
>> +Required properties:
>> +- compatible: Should be "hisilicon,hi655x-pmic"
>> +- reg: Base address of PMIC on hi6220 soc
>
> s/hi6220 soc/Hi6220 SoC/
>
>> +- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
>> +- pmic-gpios: The gpio used by PMIC irq.
>
> s/gpio/GPIO/
> s/irq/IRQ/
>
I will change this and send a new V8 version.
> These are always easier to read in this format:
>
> - compatible: Should be "hisilicon,hi655x-pmic"
> - reg: Base address of PMIC on hi6220 soc
> - interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
> - pmic-gpios: The gpio used by PMIC irq.
>
>> +Example:
>> + pmic: pmic@...00000 {
>> + compatible = "hisilicon,hi655x-pmic";
>> + reg = <0x0 0xf8000000 0x0 0x1000>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
>> + }
>
Powered by blists - more mailing lists