| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1455489459-20422-2-git-send-email-cristina.moraru09@gmail.com>
Date: Mon, 15 Feb 2016 00:37:37 +0200
From: Cristina Moraru <cristina.moraru09@...il.com>
To: jic23@...nel.org, knaack.h@....de, lars@...afoo.de,
pmeerw@...erw.net, gregkh@...uxfoundation.org,
cristina.opriceana@...il.com, marek@...delico.com,
sdliyong@...il.com, linux-iio@...r.kernel.org,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
linux-api@...r.kernel.org, geert@...ux-m68k.org, arnd@...db.de,
irina.tirdea@...el.com, k.kozlowski@...sung.com,
broonie@...nel.org, afd@...com, javier@....samsung.com,
daniel.baluta@...el.com, octavian.purdila@...el.com
Cc: Cristina Moraru <cristina.moraru09@...il.com>
Subject: [PATCH v2 1/3] iio: hmc5843: Add attributes for measurement config of bias current
Change static attribute meas_conf for bias current configuration
to channel attribute in_magn_meas_conf and also add
in_magn_meas_conf_available attribute to view available configurations.
This patch solves functionality bug: driver was using same function
hmc5843_set_measurement_configuration for setting bias current config
for all device types but the function was returning -EINVAL for any
setting >= 0x03 although, for sensor HMC5983, value 3 is valid.
API for setting bias measurement configuration:
normal - Normal measurement configuration (default):
In normal measurement configuration the device
follows normal measurement flow. Pins BP and BN
are left floating and high impedance.
positivebias - Positive bias configuration: In positive bias
configuration, a positive current is forced across
the resistive load on pins BP and BN.
negativebias - Negative bias configuration. In negative bias
configuration, a negative current is forced across
the resistive load on pins BP and BN.
disabled - Only available on HMC5983. Magnetic sensor is disabled.
Temperature sensor is enabled.
Signed-off-by: Cristina Moraru <cristina.moraru09@...il.com>
Cc: Daniel Baluta <daniel.baluta@...el.com>
---
Changes since v1:
Changed user interface for bias configuration from
integer values to string values in order to make it
more suggestive.
Used iio_enum from implementation.
drivers/staging/iio/magnetometer/hmc5843_core.c | 133 ++++++++++++++++--------
1 file changed, 87 insertions(+), 46 deletions(-)
diff --git a/drivers/staging/iio/magnetometer/hmc5843_core.c b/drivers/staging/iio/magnetometer/hmc5843_core.c
index e270ea1..77882b4 100644
--- a/drivers/staging/iio/magnetometer/hmc5843_core.c
+++ b/drivers/staging/iio/magnetometer/hmc5843_core.c
@@ -65,6 +65,33 @@
#define HMC5843_MEAS_CONF_NEGATIVE_BIAS 0x02
#define HMC5843_MEAS_CONF_MASK 0x03
+/*
+ * API for setting the measurement configuration to
+ * Normal, Positive bias and Negative bias
+ *
+ * From the datasheet:
+ * 0 - Normal measurement configuration (default): In normal measurement
+ * configuration the device follows normal measurement flow. Pins BP
+ * and BN are left floating and high impedance.
+ *
+ * 1 - Positive bias configuration: In positive bias configuration, a
+ * positive current is forced across the resistive load on pins BP
+ * and BN.
+ *
+ * 2 - Negative bias configuration. In negative bias configuration, a
+ * negative current is forced across the resistive load on pins BP
+ * and BN.
+ *
+ * 3 - Only available on HMC5983. Magnetic sensor is disabled.
+ * Temperature sensor is enabled.
+ */
+
+static const char *const hmc5843_meas_conf_modes[] = {"normal", "positivebias",
+ "negativebias"};
+
+static const char *const hmc5983_meas_conf_modes[] = {"normal", "positivebias",
+ "negativebias",
+ "disabled"};
/* Scaling factors: 10000000/Gain */
static const int hmc5843_regval_to_nanoscale[] = {
6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714
@@ -173,24 +200,6 @@ static int hmc5843_read_measurement(struct hmc5843_data *data,
return IIO_VAL_INT;
}
-/*
- * API for setting the measurement configuration to
- * Normal, Positive bias and Negative bias
- *
- * From the datasheet:
- * 0 - Normal measurement configuration (default): In normal measurement
- * configuration the device follows normal measurement flow. Pins BP
- * and BN are left floating and high impedance.
- *
- * 1 - Positive bias configuration: In positive bias configuration, a
- * positive current is forced across the resistive load on pins BP
- * and BN.
- *
- * 2 - Negative bias configuration. In negative bias configuration, a
- * negative current is forced across the resistive load on pins BP
- * and BN.
- *
- */
static int hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf)
{
int ret;
@@ -204,48 +213,55 @@ static int hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf)
}
static
-ssize_t hmc5843_show_measurement_configuration(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+int hmc5843_show_measurement_configuration(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
{
- struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
+ struct hmc5843_data *data = iio_priv(indio_dev);
unsigned int val;
int ret;
ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &val);
if (ret)
return ret;
- val &= HMC5843_MEAS_CONF_MASK;
- return sprintf(buf, "%d\n", val);
+ return val & HMC5843_MEAS_CONF_MASK;
}
static
-ssize_t hmc5843_set_measurement_configuration(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
+int hmc5843_set_measurement_configuration(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ unsigned int meas_conf)
{
- struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
- unsigned long meas_conf = 0;
- int ret;
+ struct hmc5843_data *data = iio_priv(indio_dev);
- ret = kstrtoul(buf, 10, &meas_conf);
- if (ret)
- return ret;
- if (meas_conf >= HMC5843_MEAS_CONF_MASK)
- return -EINVAL;
+ return hmc5843_set_meas_conf(data, meas_conf);
+}
- ret = hmc5843_set_meas_conf(data, meas_conf);
+static const struct iio_enum hmc5843_meas_conf_enum = {
+ .items = hmc5843_meas_conf_modes,
+ .num_items = ARRAY_SIZE(hmc5843_meas_conf_modes),
+ .get = hmc5843_show_measurement_configuration,
+ .set = hmc5843_set_measurement_configuration,
+};
- return (ret < 0) ? ret : count;
-}
+static const struct iio_chan_spec_ext_info hmc5843_ext_info[] = {
+ IIO_ENUM("meas_conf", true, &hmc5843_meas_conf_enum),
+ IIO_ENUM_AVAILABLE("meas_conf", &hmc5843_meas_conf_enum),
+ { },
+};
-static IIO_DEVICE_ATTR(meas_conf,
- S_IWUSR | S_IRUGO,
- hmc5843_show_measurement_configuration,
- hmc5843_set_measurement_configuration,
- 0);
+static const struct iio_enum hmc5983_meas_conf_enum = {
+ .items = hmc5983_meas_conf_modes,
+ .num_items = ARRAY_SIZE(hmc5983_meas_conf_modes),
+ .get = hmc5843_show_measurement_configuration,
+ .set = hmc5843_set_measurement_configuration,
+};
+
+static const struct iio_chan_spec_ext_info hmc5983_ext_info[] = {
+ IIO_ENUM("meas_conf", true, &hmc5983_meas_conf_enum),
+ IIO_ENUM_AVAILABLE("meas_conf", &hmc5983_meas_conf_enum),
+ { },
+};
static
ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
@@ -458,6 +474,25 @@ done:
.storagebits = 16, \
.endianness = IIO_BE, \
}, \
+ .ext_info = hmc5843_ext_info, \
+ }
+
+#define HMC5983_CHANNEL(axis, idx) \
+ { \
+ .type = IIO_MAGN, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = idx, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+ .ext_info = hmc5983_ext_info, \
}
static const struct iio_chan_spec hmc5843_channels[] = {
@@ -475,8 +510,14 @@ static const struct iio_chan_spec hmc5883_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3),
};
+static const struct iio_chan_spec hmc5983_channels[] = {
+ HMC5983_CHANNEL(X, 0),
+ HMC5983_CHANNEL(Z, 1),
+ HMC5983_CHANNEL(Y, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
static struct attribute *hmc5843_attributes[] = {
- &iio_dev_attr_meas_conf.dev_attr.attr,
&iio_dev_attr_scale_available.dev_attr.attr,
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
NULL
@@ -515,7 +556,7 @@ static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = {
ARRAY_SIZE(hmc5883l_regval_to_nanoscale),
},
[HMC5983_ID] = {
- .channels = hmc5883_channels,
+ .channels = hmc5983_channels,
.regval_to_samp_freq = hmc5983_regval_to_samp_freq,
.n_regval_to_samp_freq =
ARRAY_SIZE(hmc5983_regval_to_samp_freq),
--
1.9.1
Powered by blists - more mailing lists