[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1455544226-10094-2-git-send-email-leo.yan@linaro.org>
Date: Mon, 15 Feb 2016 21:50:23 +0800
From: Leo Yan <leo.yan@...aro.org>
To: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Jassi Brar <jassisinghbrar@...il.com>,
Leo Yan <leo.yan@...aro.org>,
Tyler Baker <tyler.baker@...aro.org>,
Arnd Bergmann <arnd@...db.de>,
Sudeep Holla <sudeep.holla@....com>,
Bintian Wang <bintian.wang@...wei.com>,
Chen Feng <puck.chen@...ilicon.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, Wei Xu <xuwei5@...ilicon.com>
Subject: [PATCH v7 RESEND 1/4] dt-bindings: mailbox: Document Hi6220 mailbox driver
Document DT binding for Hisilicon Hi6220 mailbox driver.
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Leo Yan <leo.yan@...aro.org>
---
.../bindings/mailbox/hisilicon,hi6220-mailbox.txt | 74 ++++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt
diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt
new file mode 100644
index 0000000..044b17f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt
@@ -0,0 +1,74 @@
+Hisilicon Hi6220 Mailbox Driver
+===============================
+
+Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel
+is unidirectional with a maximum message size of 8 words. I/O is
+performed using register access (there is no DMA) and the cell
+raises an interrupt when messages are received.
+
+Mailbox Device Node:
+====================
+
+Required properties:
+--------------------
+- compatible: Shall be "hisilicon,hi6220-mbox"
+- reg: Contains the mailbox register address range (base
+ address and length); the first item is for IPC
+ registers, the second item is shared buffer for
+ slots.
+- #mbox-cells: Common mailbox binding property to identify the number
+ of cells required for the mailbox specifier. Must be 3.
+ <&phandle slot_id dst_irq ack_irq>
+ phandle: Label name of mailbox controller
+ slot_id: Slot id used either for TX or RX
+ dst_irq: IRQ identifier index number which used by MCU
+ ack_irq: IRQ identifier index number with generating a
+ TX/RX interrupt to application processor,
+ mailbox driver uses it to acknowledge interrupt
+- interrupts: Contains the interrupt information for the mailbox
+ device. The format is dependent on which interrupt
+ controller the SoCs use.
+
+Optional Properties:
+--------------------
+- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver
+ use this flag to ask MCU to enable "automatic idle
+ flag" mode or IRQ generated mode to acknowledge a TX
+ completion.
+
+Example:
+--------
+
+ mailbox: mailbox@...10000 {
+ compatible = "hisilicon,hi6220-mbox";
+ reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
+ <0x0 0x06dff800 0x0 0x0800>; /* Mailbox */
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <3>;
+ };
+
+
+Mailbox client
+===============
+
+Required properties:
+--------------------
+- compatible: Many (See the client docs).
+- mboxes: Standard property to specify a Mailbox (See ./mailbox.txt)
+ Cells must match 'mbox-cells' (See Mailbox Device Node above).
+
+Optional Properties:
+--------------------
+- mbox-names: Name given to channels seen in the 'mboxes' property.
+
+Example:
+--------
+
+ stub_clock: stub_clock {
+ compatible = "hisilicon,hi6220-stub-clk";
+ hisilicon,hi6220-clk-sram = <&sram>;
+ #clock-cells = <1>;
+ mbox-names = "mbox-tx", "mbox-rx";
+ mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>;
+ };
--
1.9.1
Powered by blists - more mailing lists