linux-kernel - Re: [REGRESSION] i915: No HDMI output with 4.4

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160215144234.GV23290@intel.com>
Date:	Mon, 15 Feb 2016 16:42:35 +0200
From:	Ville Syrjälä <ville.syrjala@...ux.intel.com>
To:	Oleksandr Natalenko <oleksandr@...alenko.name>
Cc:	Daniel Vetter <daniel.vetter@...el.com>,
	intel-gfx@...ts.freedesktop.org, dri-devel@...ts.freedesktop.org,
	linux-kernel@...r.kernel.org,
	Daniel Vetter <daniel.vetter@...ll.ch>,
	Sonika Jindal <sonika.jindal@...el.com>,
	Shashank Sharma <shashank.sharma@...el.com>,
	Gary Wang <gary.c.wang@...el.com>
Subject: Re: [REGRESSION] i915: No HDMI output with 4.4

On Mon, Feb 15, 2016 at 10:55:33AM +0200, Oleksandr Natalenko wrote:
> 13.02.2016 01:23, Ville Syrjälä wrote:
> > - Do you have another monitor to try?
> > - Do you have another cable to try?
> 
> More on this.
> 
> Computer DVI —— old DVI-HDMI cable —— old monitor HDMI == not working
> Computer DVI —— another DVI-HDMI cable —— old monitor HDMI == not 
> working
> Computer DVI —— DVI-DVI cable —— another monitor DVI == works
> 
> So
> 
> > Shouldn't really matter. HDMI and DVI are identical at this level.
> 
> Not quite, as far as I can see.

Well, it seems this particular monitor is just somehow funky. It's a bit
strange that the hpd interrupt still works. It would seem to indicate
that there's two separate voltage thresholds for detection, one for the
hpd generation, and another for the live status. I did see something
similar on another platforms (CHV) where it had two different hpd
detection registers, and those produced different results when the
pullup on the hpd pin was misconfigured.

Anyway, I'm out of ideas now :( Anyone else got something up their
sleeve?

I'm starting to think this is going to be our only option:
-       if (intel_hdmi_set_edid(connector, live_status)) {
+       if (intel_hdmi_set_edid(connector, true)) {

It would more or less turn the live status check into a fixed
msleep(80) for the disconnect case. For the connect case it would
still break out sooner when live status works.

The downside is that if the cable is yanked slowly, we'll still succeed
in the ddc communication during unplug and thus fail to notice that the
monitor was actually disconnected. But the delay should make that less
likely.

-- 
Ville Syrjälä
Intel OTC