| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1455604648-20668-3-git-send-email-majun258@huawei.com>
Date: Tue, 16 Feb 2016 14:37:25 +0800
From: MaJun <majun258@...wei.com>
To: <Catalin.Marinas@....com>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <Will.Deacon@....com>,
<mark.rutland@....com>, <marc.zyngier@....com>,
<jason@...edaemon.net>, <tglx@...utronix.de>, <lizefan@...wei.com>,
<huxinwei@...wei.com>, <dingtianhong@...wei.com>,
<liguozhu@...ilicon.com>, <guohanjun@...wei.com>,
<majun258@...wei.com>, <zhaojunhua@...ilicon.com>
Subject: [PATCH v2 2/5] dt-binding:Rename the mbigen binding file name
From: Ma Jun <majun258@...wei.com>
Because added the mbigen-v1 compatible string, the origin name is
not suitable any more. So,I remove the version number from file name.
Signed-off-by: Ma Jun <majun258@...wei.com>
---
.../interrupt-controller/hisilicon,mbigen-v2.txt | 74 --------------------
.../interrupt-controller/hisilicon,mbigen.txt | 74 ++++++++++++++++++++
2 files changed, 74 insertions(+), 74 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
deleted file mode 100644
index bdd1dea..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Hisilicon mbigen device tree bindings.
-=======================================
-
-Mbigen means: message based interrupt generator.
-
-MBI is kind of msi interrupt only used on Non-PCI devices.
-
-To reduce the wired interrupt number connected to GIC,
-Hisilicon designed mbigen to collect and generate interrupt.
-
-
-Non-pci devices can connect to mbigen and generate the
-interrupt by writing ITS register.
-
-The mbigen chip and devices connect to mbigen have the following properties:
-
-Mbigen main node required properties:
--------------------------------------------
-- compatible: Should be "hisilicon,mbigen-v2" or "hisilicon,mbigen-v1"
-
-- reg: Specifies the base physical address and size of the Mbigen
- registers.
-
-- interrupt controller: Identifies the node as an interrupt controller
-
-- msi-parent: Specifies the MSI controller this mbigen use.
- For more detail information,please refer to the generic msi-parent binding in
- Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-- num-pins: the total number of pins implemented in this Mbigen
- instance.
-
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value must be 2.
-
- The 1st cell is hardware pin number of the interrupt.This number is local to
- each mbigen chip and in the range from 0 to the maximum interrupts number
- of the mbigen.
-
- The 2nd cell is the interrupt trigger type.
- The value of this cell should be:
- 1: rising edge triggered
- or
- 4: high level triggered
-
-Examples:
-
- mbigen_device_gmac:intc {
- compatible = "hisilicon,mbigen-v2";
- reg = <0x0 0xc0080000 0x0 0x10000>;
- interrupt-controller;
- msi-parent = <&its_dsa 0x40b1c>;
- num-pins = <9>;
- #interrupt-cells = <2>;
- };
-
-Devices connect to mbigen required properties:
-----------------------------------------------------
--interrupt-parent: Specifies the mbigen device node which device connected.
-
--interrupts:Specifies the interrupt source.
- For the specific information of each cell in this property,please refer to
- the "interrupt-cells" description mentioned above.
-
-Examples:
- gmac0: ethernet@...80000 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0xc2080000 0 0x20000>,
- <0 0xc0000000 0 0x1000>;
- interrupt-parent = <&mbigen_device_gmac>;
- interrupts = <656 1>,
- <657 1>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen.txt
new file mode 100644
index 0000000..bdd1dea
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen.txt
@@ -0,0 +1,74 @@
+Hisilicon mbigen device tree bindings.
+=======================================
+
+Mbigen means: message based interrupt generator.
+
+MBI is kind of msi interrupt only used on Non-PCI devices.
+
+To reduce the wired interrupt number connected to GIC,
+Hisilicon designed mbigen to collect and generate interrupt.
+
+
+Non-pci devices can connect to mbigen and generate the
+interrupt by writing ITS register.
+
+The mbigen chip and devices connect to mbigen have the following properties:
+
+Mbigen main node required properties:
+-------------------------------------------
+- compatible: Should be "hisilicon,mbigen-v2" or "hisilicon,mbigen-v1"
+
+- reg: Specifies the base physical address and size of the Mbigen
+ registers.
+
+- interrupt controller: Identifies the node as an interrupt controller
+
+- msi-parent: Specifies the MSI controller this mbigen use.
+ For more detail information,please refer to the generic msi-parent binding in
+ Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+- num-pins: the total number of pins implemented in this Mbigen
+ instance.
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 2.
+
+ The 1st cell is hardware pin number of the interrupt.This number is local to
+ each mbigen chip and in the range from 0 to the maximum interrupts number
+ of the mbigen.
+
+ The 2nd cell is the interrupt trigger type.
+ The value of this cell should be:
+ 1: rising edge triggered
+ or
+ 4: high level triggered
+
+Examples:
+
+ mbigen_device_gmac:intc {
+ compatible = "hisilicon,mbigen-v2";
+ reg = <0x0 0xc0080000 0x0 0x10000>;
+ interrupt-controller;
+ msi-parent = <&its_dsa 0x40b1c>;
+ num-pins = <9>;
+ #interrupt-cells = <2>;
+ };
+
+Devices connect to mbigen required properties:
+----------------------------------------------------
+-interrupt-parent: Specifies the mbigen device node which device connected.
+
+-interrupts:Specifies the interrupt source.
+ For the specific information of each cell in this property,please refer to
+ the "interrupt-cells" description mentioned above.
+
+Examples:
+ gmac0: ethernet@...80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0xc2080000 0 0x20000>,
+ <0 0xc0000000 0 0x1000>;
+ interrupt-parent = <&mbigen_device_gmac>;
+ interrupts = <656 1>,
+ <657 1>;
+ };
--
1.7.1
Powered by blists - more mailing lists