[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56C37AAD.7030007@linaro.org>
Date: Tue, 16 Feb 2016 19:38:21 +0000
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Mark Rutland <mark.rutland@....com>
Cc: alsa-devel@...a-project.org, Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Patrick Lai <plai@...eaurora.org>,
Liam Girdwood <lgirdwood@...il.com>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, kwestfie@...eaurora.org
Subject: Re: [RFC v1 1/9] ASoC: msm8x176: Add Device Tree bindings.
Thanks for the review,
On 16/02/16 18:58, Mark Rutland wrote:
> On Tue, Feb 16, 2016 at 05:32:30PM +0000, Srinivas Kandagatla wrote:
>> This patch adds DT bindings required for msm8x16 codec which is
>> integrated in msm8916 and apq8016 SOCs.
>>
>> Codec IP is divided into two parts, first analog which is integrated
>> in pmic pm8916 and secondly digital part which is integrated into
>> application processor. Codec register controls are also split across
>> pmic an lpass. Analog part is controlled via spmi bus to pmic, registers
>> on the Application processor are memory mapped.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
>> ---
>> .../devicetree/bindings/sound/qcom,msm8x16-wcd.txt | 91 ++++++++++++++++++++++
>> 1 file changed, 91 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/sound/qcom,msm8x16-wcd.txt
>>
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8x16-wcd.txt b/Documentation/devicetree/bindings/sound/qcom,msm8x16-wcd.txt
>> new file mode 100644
>> index 0000000..42d3f66
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/qcom,msm8x16-wcd.txt
>> @@ -0,0 +1,91 @@
>> +msm8x16 audio CODEC aka Tombak audio CODEC
>> +
>> +Codec IP is divided into two parts, first analog which is integrated in pmic pm8916
>> +and secondly digital part which is integrated into application processor. Codec register
>> +controls are also split across pmic an lpass. Analog part is controlled via spmi bus to pmic.
>> +
>> +## Bindings for codec core on pmic:
>> +
>> +Required properties
>> + - compatible = "qcom,msm8x16-wcd-codec";
>
> Wildcard bindings are frowned upon generally.
>
> Have separate comaptible strings, perhaps with one as a fallback for the
> other.
Ok, Will add soc specific compatible strings without wildcards in next
version.
>
>> + - reg: represents the slave base address provided to the peripheral.
>> + - interrupt-parent : The parent interrupt controller.
>> + - interrupts: List of interrupts in given SPMI peripheral.
>> + - interrupt-names: Names specified to above list of interrupts in same
>> + order
>
> You must explicitly describe the set of interrupt-names for the binding.
>
I will do that.
>> + - vddio-supply: phandle to VDD_CDC_IO regulator device tree node.
>> + - vdd-tx-rx-supply: phandle to VDD_CDC_TX/RX/CX regulator device tree node.
>> + - vdda-cp-supply: phandle of VDD_CP charge pump supply's regulator device tree node.
>> + - vdda-hph-supply: phandle of VDD_HPH supply's regulator device tree node.
>> + - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator device tree
>> + node.
>> +- qcom,lpass-codec-core: phandle to syscon node of lpass code core.
>> +
>> +Optional Properties:
>> +- qcom,micbias1-ext-cap: present if micbias1 has external capacitor connected.
>> +- qcom,micbias2-ext-cap: present if micbias2 has external capacitor connected.
>> +
>> +## Bindings codec core on lpass:
>> +
>> +Required properties
>> + - compatible: should be "syscon" follwed by "qcom,msm8x16-lpass-codec"
>
> This should be the other way around. "syscon" should be the fallback as
> it is the least specific. Likewise for the example.
>
Yep, will change the order and remove the wildcard in the compatible string.
> Again, wildcard bindings are generally frowned upon.
>
> Mark.
>
Powered by blists - more mailing lists