linux-kernel - [PATCH v3 2/6] mfd: cros_ec: Add cros_ec_cmd_xfer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1455704726-9342-3-git-send-email-tomeu.vizoso@collabora.com>
Date:	Wed, 17 Feb 2016 11:25:22 +0100
From:	Tomeu Vizoso <tomeu.vizoso@...labora.com>
To:	linux-kernel@...r.kernel.org
Cc:	Sameer Nanda <snanda@...omium.org>,
	Javier Martinez Canillas <javier@....samsung.com>,
	Lee Jones <lee.jones@...aro.org>,
	Benson Leung <bleung@...omium.org>,
	Enric Balletbò <enric.balletbo@...labora.co.uk>,
	Vic Yang <victoryang@...omium.org>,
	Stephen Boyd <sboyd@...eaurora.org>,
	Vincent Palatin <vpalatin@...omium.org>,
	Randall Spangler <rspangler@...omium.org>,
	Todd Broch <tbroch@...omium.org>,
	Gwendal Grignou <gwendal@...omium.org>,
	Tomeu Vizoso <tomeu.vizoso@...labora.com>,
	Olof Johansson <olof@...om.net>
Subject: [PATCH v3 2/6] mfd: cros_ec: Add cros_ec_cmd_xfer_status helper

So that callers of cros_ec_cmd_xfer don't have to repeat boilerplate
code when checking for errors from the EC side.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@...labora.com>
---

Changes in v3: None
Changes in v2: None

 drivers/platform/chrome/cros_ec_proto.c | 14 ++++++++++++++
 include/linux/mfd/cros_ec.h             | 18 ++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index 00beacbf7645..c95d68dee3c9 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -472,3 +472,17 @@ int cros_ec_get_next_event(struct cros_ec_device *ec_dev)
 		return get_keyboard_state_event(ec_dev);
 }
 EXPORT_SYMBOL(cros_ec_get_next_event);
+
+int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
+			    struct cros_ec_command *msg)
+{
+	int ret = cros_ec_cmd_xfer(ec_dev, msg);
+
+	if (ret < 0)
+		dev_err(ec_dev->dev, "Command xfer error (err:%d)\n", ret);
+	else if (msg->result)
+		return -EECRESULT - msg->result;
+
+	return ret;
+}
+EXPORT_SYMBOL(cros_ec_cmd_xfer_status);
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 1f88418a36cf..b6961c717209 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -40,6 +40,9 @@
 #define EC_MAX_REQUEST_OVERHEAD		1
 #define EC_MAX_RESPONSE_OVERHEAD	2
 
+/* ec_command return value for non-success result from EC */
+#define EECRESULT 1000
+
 /*
  * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
  */
@@ -250,6 +253,21 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
 		     struct cros_ec_command *msg);
 
 /**
+ * cros_ec_cmd_xfer_status - Send a command to the ChromeOS EC
+ *
+ * This function is identical to cros_ec_cmd_xfer, except it returns succes
+ * status only if both the command was transmitted successfully and the EC
+ * replied with success status. It's not necessary to check msg->result when
+ * using this function.
+ *
+ * @ec_dev: EC device
+ * @msg: Message to write
+ * @return: Num. of bytes transferred on success, <0 on failure
+ */
+int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
+			    struct cros_ec_command *msg);
+
+/**
  * cros_ec_remove - Remove a ChromeOS EC
  *
  * Call this to deregister a ChromeOS EC, then clean up any private data.
-- 
2.5.0