[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <56C578D4.30108@rock-chips.com>
Date: Thu, 18 Feb 2016 15:55:00 +0800
From: Yakir Yang <ykk@...k-chips.com>
To: Mark yao <mark.yao@...k-chips.com>,
Heiko Stuebner <heiko@...ech.de>
Cc: David Airlie <airlied@...ux.ie>,
Thierry Reding <treding@...dia.com>,
Rob Herring <robh+dt@...nel.org>,
Ken Mixte <kmixter@...gle.com>, Ben Chan <benchan@...gle.com>,
Zheng Yang <zhengyang@...k-chips.com>,
Kumar Gala <galak@...eaurora.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v8 0/2] Add Rockchip Inno-HDMI driver
Hi Mark,
Thanks for your apply ;)
- Yakir
On 02/18/2016 02:12 PM, Mark yao wrote:
> On 2016年01月29日 14:42, Yakir Yang wrote:
>> Here are a brief introduction to Innosilicon HDMI IP:
>> - Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant
>> transmitter
>> - Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec
>> - Digital video interface supports a pixel size of 24, 30, 36,
>> 48bits color depth in RGB
>> - S/PDIF output supports PCM, Dolby Digital, DTS digital audio
>> transmission
>> (32-192kHz Fs) using IEC60958 and IEC 61937
>> - The EDID and CEC function are also supported by Innosilicon HDMI
>> Transmitter Controlle
>>
>> Changes in v8:
>> - Don't check whether encoder output format is RGB colorspace, cause
>> driver
>> default configure the output colorspace to RGB. (ZhengYang)
>> - Correct the check condition in inno_hdmi_config_video_csc()
>> (ZhengYang)
>> - if (data->enc_out_format == data->enc_out_format) {
>> + if (data->enc_in_format == data->enc_out_format) {
>>
>> Changes in v7:
>> - Correct the module licnese statement (Paul)
>> - MODULE_LICENSE("GPL");
>> + MODULE_LICENSE("GPLv2");
>> - Start indentation with tabs and fix the misspell in Kconfig (Paul)
>> - Carry the lost device-binding document (Heiko)
>>
>> Changes in v6:
>> - Rebase the Makefile/Kconfig files which add by Chris's
>> rockchip-mipi driver (Caeser)
>>
>> Changes in v5:
>> - Use hdmi_infoframe helper functions to packed the infoframe (Russell)
>> - Remove the unused double wait_for_completion_timeout for ddc
>> transfer (Russell)
>> - Remove the unused local variable in "inno_hdmi_i2c_write()"
>> function (Russell)
>>
>> Changes in v4:
>> - Modify the commit title "drm/rockchip: hdmi: ..." (Mark)
>> - Correct the "DKMS" to "DPMS" (Mark)
>> - Fix over 80 characters problems (Mark)
>> - Remove encoder .prepare/.commit helper functions, and move the vop
>> mode
>> configure function into encoder .enable helper functions. (Mark)
>>
>> Changes in v3:
>> - Use encoder enable/disable function, and remove the encoder DPMS
>> function
>> - Keep HDMI PLL power on in standby mode
>>
>> Changes in v2:
>> - Using DRM atomic helper functions for connector init (Mark)
>> - Remove "hdmi->connector.encoder = encoder;" (Mark)
>> - Add the Acked-by tags from Rob
>> - Correct the misspell "rk3036-dw-hdmi" (Heiko)
>>
>> Yakir Yang (2):
>> drm/rockchip: hdmi: add Innosilicon HDMI support
>> dt-bindings: add document for Innosilicon HDMI on Rockchip platform
>>
>> .../display/rockchip/inno_hdmi-rockchip.txt | 50 ++
>> drivers/gpu/drm/rockchip/Kconfig | 8 +
>> drivers/gpu/drm/rockchip/Makefile | 1 +
>> drivers/gpu/drm/rockchip/inno_hdmi.c | 939
>> +++++++++++++++++++++
>> drivers/gpu/drm/rockchip/inno_hdmi.h | 362 ++++++++
>> 5 files changed, 1360 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
>> create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c
>> create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h
>>
>
> Applied to my branch :-) .
>
> Thanks.
>
Powered by blists - more mailing lists