[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1455810794-3188-3-git-send-email-daniel.baluta@intel.com>
Date: Thu, 18 Feb 2016 17:53:07 +0200
From: Daniel Baluta <daniel.baluta@...el.com>
To: jic23@...nel.org
Cc: knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
wsa@...-dreams.de, linux-i2c@...r.kernel.org,
lucas.demarchi@...el.com, daniel.baluta@...el.com,
srinivas.pandruvada@...ux.intel.com, ggao@...ensense.com,
adi.reus@...il.com, cmo@...exis.com, mwelling@...e.org
Subject: [RFC PATCH 2/9] iio: imu: inv_mpu6050: Fix Yoda conditions
This fixes the following checkpatch warning:
* WARNING: Comparisons should place the constant
on the right side of the test
Signed-off-by: Daniel Baluta <daniel.baluta@...el.com>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 6 +++---
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 84e014c..c550ebb 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -84,7 +84,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
* clock source be switched to gyro. Otherwise, it must be set to
* internal clock
*/
- if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
+ if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
result = regmap_read(st->map, st->reg->pwr_mgmt_1, &mgmt_1);
if (result)
return result;
@@ -92,7 +92,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK;
}
- if ((INV_MPU6050_BIT_PWR_GYRO_STBY == mask) && (!en)) {
+ if ((mask == INV_MPU6050_BIT_PWR_GYRO_STBY) && (!en)) {
/*
* turning off gyro requires switch to internal clock first.
* Then turn off gyro engine
@@ -117,7 +117,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
if (en) {
/* Wait for output stabilize */
msleep(INV_MPU6050_TEMP_UP_TIME);
- if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
+ if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
/* switch internal clock to PLL */
mgmt_1 |= INV_CLK_PLL;
result = regmap_write(st->map,
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 1fc5fd9..441080b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -168,7 +168,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
result = kfifo_out(&st->timestamps, ×tamp, 1);
/* when there is no timestamp, put timestamp as 0 */
- if (0 == result)
+ if (result == 0)
timestamp = 0;
result = iio_push_to_buffers_with_timestamp(indio_dev, data,
--
2.5.0
Powered by blists - more mailing lists