[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1455887034-7739-3-git-send-email-abrodkin@synopsys.com>
Date: Fri, 19 Feb 2016 16:03:52 +0300
From: Alexey Brodkin <Alexey.Brodkin@...opsys.com>
To: linux-kernel@...r.kernel.org
Cc: linux-snps-arc@...ts.infradead.org,
Alexey Brodkin <Alexey.Brodkin@...opsys.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org
Subject: [PATCH 2/4] drm: Add DT bindings documentation for ARC PGU display controller
This add DT bindings documentation for ARC PGU display controller.
Signed-off-by: Alexey Brodkin <abrodkin@...opsys.com>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Pawel Moll <pawel.moll@....com>
Cc: Mark Rutland <mark.rutland@....com>
Cc: Ian Campbell <ijc+devicetree@...lion.org.uk>
Cc: Kumar Gala <galak@...eaurora.org>
Cc: devicetree@...r.kernel.org
Cc: linux-snps-arc@...ts.infradead.org
---
.../devicetree/bindings/display/snps,arcpgu.txt | 74 ++++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/snps,arcpgu.txt
diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
new file mode 100644
index 0000000..c8382fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
@@ -0,0 +1,74 @@
+ARC PGU
+
+This is a display controller found on several development boards produced
+by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
+framebuffer and sends it to a single digital encoder (usually HDMI).
+
+Required properties:
+ - compatible: "snps,arcpgu"
+ - reg: Physical base address and length of the controller's registers.
+ - clocks: A list of phandle + clock-specifier pairs, one for each
+ entry in 'clock-names'.
+ - clock-names: A list of clock names. For ARC PGU it should contain:
+ - "pxlclk" for the clock feeding the output PLL of the controller.
+ - encoder-slave: Phandle of encoder chip.
+
+Required sub-nodes:
+ - port: The PGU connection to an encoder chip. The connection is modelled
+ using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt.
+
+Example:
+
+/ {
+ ...
+
+ pgu@...XXXXXXX {
+ compatible = "snps,arcpgu";
+ reg = <0xXXXXXXXX 0x400>;
+ clocks = <&clock_node>;
+ clock-names = "pxlclk";
+ encoder-slave = <&encoder_node>;
+
+ port {
+ pgu_output: endpoint {
+ remote-endpoint = <&hdmi_enc_input>;
+ };
+ };
+ };
+
+ /* HDMI encoder on I2C bus */
+ i2c@...XXXXXXX {
+ compatible = "...";
+
+ encoder_node:encoder_node@...XXXXXXX{
+ compatible="...";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ hdmi_enc_input:endpoint {
+ remote-endpoint = <&pgu_output>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi_enc_output:endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+ }
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_enc_output>;
+ };
+ };
+ };
+};
--
2.5.0
Powered by blists - more mailing lists