| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <s5hr3g52fud.wl-tiwai@suse.de> Date: Mon, 22 Feb 2016 11:34:50 +0100 From: Takashi Iwai <tiwai@...e.de> To: Martin Kepplinger <martink@...teo.de> Cc: david.henningsson@...onical.com, han.lu@...el.com, libin.yang@...el.com, treding@...dia.com, perex@...ex.cz, alsa-devel@...a-project.org, linux-kernel@...r.kernel.org Subject: Re: [BUG] [REGRESSION] [BISECTED] -rc1 breaks audio over HDMI for i915 On Mon, 22 Feb 2016 11:24:05 +0100, Martin Kepplinger wrote: > > Am 2016-02-12 um 17:16 schrieb Takashi Iwai: > > On Fri, 12 Feb 2016 16:54:44 +0100, > > Martin Kepplinger wrote: > >> > >> Am 2016-02-12 um 14:49 schrieb Takashi Iwai: > >>> On Fri, 12 Feb 2016 14:09:36 +0100, > >>> Martin Kepplinger wrote: > >>>> > >>>> Am 2016-02-11 um 10:06 schrieb Takashi Iwai: > >>>>> On Wed, 10 Feb 2016 18:21:11 +0100, > >>>>> Martin Kepplinger wrote: > >>>>>> > >>>>>> Am 2016-02-09 um 12:44 schrieb Takashi Iwai: > >>>>>>> On Tue, 09 Feb 2016 07:34:48 +0100, > >>>>>>> Martin Kepplinger wrote: > >>>>>>>> > >>>>>>>> The following change: > >>>>>>>> > >>>>>>>> 788d441 ALSA: hda - Use component ops for i915 HDMI/DP audio jack handling > >>>>>>>> > >>>>>>>> breaks audio over HDMI on my snd_hda_intel laptop. It is the first bad > >>>>>>>> commit. > >>>>>>>> > >>>>>>>> This was merged for -rc1 and isn't fixed until now, so I got nervous. > >>>>>>>> There are > >>>>>>>> no errors in the log that stand out. I'm no sound or alsa developer, and > >>>>>>>> just reverting it isn't easy since there is stuff depending on this. > >>>>>>>> > >>>>>>>> I'm happy to test possible fixes and hope v4.5 not to ship with such a big > >>>>>>>> regression ;) > >>>>>>> > >>>>>>> Could you give a bit more detail about your hardware? At best, give > >>>>>>> alsa-info.sh output (run with --no-upload option). Also, give the > >>>>>>> output of dmesg, too. > >>>>>>> > >>>>>>> In addition, what shows /proc/asound/card*/eld#*.* files? Does any of > >>>>>>> it show the proper connection state and ELD? > >>>>>> > >>>>>> alsa-info and dmesg are appended, and > >>>>>> > >>>>>> root@...top:/home/martin/dev# cat /proc/asound/card*/eld#* > >>>>>> monitor_present 0 > >>>>>> eld_valid 0 > >>>>> > >>>>> OK, then could you put some debug print in intel_pin_eld_notify() in > >>>>> sound/pci/hda/patch_hdmi.c? This is the callback to be called by i915 > >>>>> driver at enabling / disabling HDMI/DP audio. > >>>> > >>>> intel_pin_eld_notify() is called during HDMI plugin with > >>>> > >>>> audio_ptr: ffff880242ea8800, port 1 > >>>> > >>>> and doesn't return early. > >>> > >>> OK, so it was processed but the ELD wasn't updated by some reason. > >>> > >>>>> (Also, to be sure, check whether snd_hdac_i915_register_notifier() in > >>>>> sound/hda/hda_i915.c is called, too.) > >>>> > >>>> snd_hdac_i915_register_notifier() is called during boot. > >>>> > >>>>> > >>>>> If intel_pin_eld_notify() is registered but never called, it implies > >>>>> something wrong in i915 driver side. If it gets called, we need to > >>>>> track down: what port value was passed there, and how > >>>>> hdmi_present_sense() and sync_eld_via_acomp() behave there. > >>>> > >>>> I'll try to look at said path, if you have no other idea in the meantime. > >>> > >>> Put some debug prints in sync_eld_via_acomp(), e.g. check whether > >>> snd_hdac_acomp_get_eld() returns an error or snd_hdmi_parse_eld() > >>> returns an error. If you got an error, track down more deeply. > >>> > >>> For example, the former function is defined in sound/hda/hdac_i915.c, > >>> and it calls the function i915_audio_component_get_eld() in > >>> drivers/gpu/drm/i915/intel_audio.c. You can follow what returns an > >>> error. > >>> > >>> Similarly, the latter function is defined in sound/pci/hda/hda_eld.c. > >>> Usually you see a kernel message for parse errors, so I guess this > >>> isn't the case, though. > >>> > >> > >> no error in either of the functions. size is always 0, after boot and > >> after HDMI plugin. is that normal? > > > > No, it means that no connection is reported back. Check the call of > > i915_audio_component_get_eld() as mentioned in the above. > > Does it return 0? Also I suppose monitor_present is set to false? > > If so, it implies that intel_audio_codec_enable() isn't called. > > > > When the above is true, boot with drm.debug=0x0e, and give the kernel > > messages. > > > > The above is true and -rc5 didn't fix the problem. I append "dmesg|grep > drm" with drm.debug=0x0e. HDMI is plugged in at about 90 seconds in. And how about my questions in the previous mail? Does i915_audio_component_get_eld() is called and returns 0? And is monitor_present set true or false? If i915_audio_component_get_eld() is called but returns zero, track the code flow there. It means either intel_encoder is NULL or intel_dig_port->audio_connector is NULL. Takashi > > martin > > > [ 2.385845] [drm:intel_opregion_setup] graphic opregion physical addr: 0xa6fb2018 > [ 2.385860] [drm:intel_opregion_setup] Public ACPI methods supported > [ 2.385862] [drm:intel_opregion_setup] SWSCI supported > [ 2.392036] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241 > [ 2.392041] [drm:intel_opregion_setup] ASLE supported > [ 2.392051] [drm:intel_opregion_setup] ASLE extension supported > [ 2.392058] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4) > [ 2.392341] [drm:intel_device_info_runtime_init] slice total: 0 > [ 2.392345] [drm:intel_device_info_runtime_init] subslice total: 0 > [ 2.392348] [drm:intel_device_info_runtime_init] subslice per slice: 0 > [ 2.392351] [drm:intel_device_info_runtime_init] EU total: 0 > [ 2.392355] [drm:intel_device_info_runtime_init] EU per subslice: 0 > [ 2.392358] [drm:intel_device_info_runtime_init] has slice power gating: n > [ 2.392361] [drm:intel_device_info_runtime_init] has subslice power gating: n > [ 2.392364] [drm:intel_device_info_runtime_init] has EU power gating: n > [ 2.392368] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 2.392380] [drm] Driver supports precise vblank timestamp query. > [ 2.392391] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz > [ 2.392395] [drm:intel_bios_init] VBT signature "$VBT SNB/IVB-MOBILE ", BDB version 165 > [ 2.392400] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 > [ 2.392403] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 > [ 2.392408] [drm:parse_lfp_panel_data] DRRS supported mode is static > [ 2.392413] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: > [ 2.392419] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 71000 1366 1407 1434 1500 768 771 775 788 0x8 0xa > [ 2.392423] [drm:parse_lfp_panel_data] VBT initial LVDS value 300300 > [ 2.392427] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 1000 Hz, active high, min brightness 0, level 255 > [ 2.392432] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: > [ 2.392438] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa > [ 2.392441] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT > [ 2.392446] [drm:parse_driver_features] DRRS State Enabled:1 > [ 2.392464] [drm:intel_dsm_pci_probe] no _DSM method for intel device > [ 2.392477] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 131072K, usable: 131072K > [ 2.392482] [drm:intel_power_well_enable] enabling always-on > [ 2.392961] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec) > [ 2.392966] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec) > [ 2.392970] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec) > [ 2.392974] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec) > [ 2.392978] [drm:intel_print_wm_latency] Sprite WM0 latency 7 (0.7 usec) > [ 2.392981] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec) > [ 2.392985] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec) > [ 2.392990] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec) > [ 2.392993] [drm:intel_print_wm_latency] Cursor WM0 latency 7 (0.7 usec) > [ 2.392998] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec) > [ 2.393002] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec) > [ 2.393006] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec) > [ 2.393010] [drm:snb_wm_latency_quirk] WM latency values increased to avoid potential underruns > [ 2.393014] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec) > [ 2.393018] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec) > [ 2.393021] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec) > [ 2.393025] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec) > [ 2.393029] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec) > [ 2.393032] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec) > [ 2.393036] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec) > [ 2.393040] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec) > [ 2.393046] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec) > [ 2.393049] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec) > [ 2.393055] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec) > [ 2.393059] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec) > [ 2.393064] [drm:intel_modeset_init] 2 display pipes available. > [ 2.393097] [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz > [ 2.393101] [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz > [ 2.393103] [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz > [ 2.408452] [drm:intel_lvds_init] using preferred mode from EDID: > [ 2.408461] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 2.408471] [drm:intel_lvds_init] detected single-link lvds configuration > [ 2.408598] [drm:intel_panel_setup_backlight] Connector LVDS-1 backlight initialized, enabled, brightness 976/976 > [ 2.408751] [drm:intel_crt_reset] crt adpa set to 0xf40000 > [ 2.408762] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1 > [ 2.409236] [drm:intel_sdvo_read_byte] i2c transfer returned -6 > [ 2.409239] [drm:intel_sdvo_init] No SDVO device found on SDVOB > [ 2.409285] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0 > [ 2.409938] [drm:intel_dp_init_connector] Adding DP connector on port B > [ 2.410009] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1 > [ 2.410064] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 > [ 2.410068] [drm:ironlake_init_pch_refclk] Using SSC on panel > [ 2.410489] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled > [ 2.410492] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled > [ 2.410498] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1 > [ 2.410505] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 > [ 2.410513] [drm:intel_modeset_readout_hw_state] [ENCODER:28:LVDS-28] hw state readout: enabled, pipe A > [ 2.410518] [drm:intel_modeset_readout_hw_state] [ENCODER:34:DAC-34] hw state readout: disabled, pipe A > [ 2.410523] [drm:intel_modeset_readout_hw_state] [ENCODER:35:TMDS-35] hw state readout: disabled, pipe A > [ 2.410526] [drm:intel_modeset_readout_hw_state] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A > [ 2.410531] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:LVDS-1] hw state readout: enabled > [ 2.410535] [drm:intel_modeset_readout_hw_state] [CONNECTOR:33:VGA-1] hw state readout: disabled > [ 2.410539] [drm:intel_modeset_readout_hw_state] [CONNECTOR:36:HDMI-A-1] hw state readout: disabled > [ 2.410542] [drm:intel_modeset_readout_hw_state] [CONNECTOR:41:DP-1] hw state readout: disabled > [ 2.410559] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff8802454fb400 for pipe A > [ 2.410561] [drm:intel_dump_pipe_config] cpu_transcoder: A > [ 2.410563] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 > [ 2.410566] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 4963259, gmch_n: 8388608, link_m: 137868, link_n: 524288, tu: 64 > [ 2.410569] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 2.410571] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 > [ 2.410574] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 > [ 2.410575] [drm:intel_dump_pipe_config] requested mode: > [ 2.410579] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 70714 1366 1407 1434 1500 768 771 775 788 0x40 0xa > [ 2.410581] [drm:intel_dump_pipe_config] adjusted mode: > [ 2.410584] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 70714 1366 1407 1434 1500 768 771 775 788 0x40 0xa > [ 2.410588] [drm:intel_dump_crtc_timings] crtc timings: 70714 1366 1407 1434 1500 768 771 775 788, type: 0x40 flags: 0xa > [ 2.410590] [drm:intel_dump_pipe_config] port clock: 70714 > [ 2.410592] [drm:intel_dump_pipe_config] pipe src size: 720x400 > [ 2.410594] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 > [ 2.410596] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 2.410599] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05560300, enabled > [ 2.410600] [drm:intel_dump_pipe_config] ips: 0 > [ 2.410602] [drm:intel_dump_pipe_config] double wide: 0 > [ 2.410605] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x21007, fp1: 0x30d07 > [ 2.410606] [drm:intel_dump_pipe_config] planes on this crtc > [ 2.410609] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0 > [ 2.410612] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 > [ 2.410614] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 > [ 2.410618] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff8802454e1400 for pipe B > [ 2.410620] [drm:intel_dump_pipe_config] cpu_transcoder: B > [ 2.410622] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 > [ 2.410624] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 2.410627] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 2.410630] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 > [ 2.410633] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 > [ 2.410635] [drm:intel_dump_pipe_config] requested mode: > [ 2.410640] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 > [ 2.410643] [drm:intel_dump_pipe_config] adjusted mode: > [ 2.410647] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 > [ 2.410651] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 > [ 2.410654] [drm:intel_dump_pipe_config] port clock: 0 > [ 2.410657] [drm:intel_dump_pipe_config] pipe src size: 0x0 > [ 2.410660] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 > [ 2.410664] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 2.410667] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 2.410670] [drm:intel_dump_pipe_config] ips: 0 > [ 2.410672] [drm:intel_dump_pipe_config] double wide: 0 > [ 2.410676] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 > [ 2.410678] [drm:intel_dump_pipe_config] planes on this crtc > [ 2.410683] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0 > [ 2.410687] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0 > [ 2.410692] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0 > [ 2.411039] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, 7ffff000] > [ 2.414219] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0 > [ 2.416392] [drm:i915_gem_context_init] HW context support initialized > [ 2.416412] [drm:init_status_page] render ring hws offset: 0x7fff2000 > [ 2.416500] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00020000 > [ 2.416515] [drm:init_status_page] bsd ring hws offset: 0x00021000 > [ 2.416604] [drm:init_status_page] blitter ring hws offset: 0x00042000 > [ 2.418803] [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz > [ 2.418826] [drm:gen6_check_mch_setup] Wrong MCH_SSKPD value: 0x16040307 This can cause underruns. > [ 2.419172] [drm:intel_backlight_device_register] Connector LVDS-1 backlight sysfs interface registered > [ 2.419179] [drm:intel_fbdev_init_bios] pipe A not active or no fb, skipping > [ 2.419182] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping > [ 2.419185] [drm:intel_fbdev_init_bios] no active fbs found, not using BIOS config > [ 2.419212] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 2.419218] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 2.419224] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] status updated from unknown to connected > [ 2.419248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 2.419256] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 2.419260] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 2.419264] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 2.419271] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 > [ 2.420136] [drm:intel_didl_outputs] 8 outputs detected > [ 2.428736] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 2.428741] [drm:intel_crt_detect] CRT not detected via hotplug > [ 2.428915] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 2.428919] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 2.429088] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 2.429093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 2.429097] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 2.429101] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 2.429479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 2.429482] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 2.429484] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 2.429488] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] status updated from unknown to disconnected > [ 2.429494] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 2.429498] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 2.429500] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 2.556769] [drm:intel_hdmi_detect] Live status not up! > [ 2.556782] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] status updated from unknown to disconnected > [ 2.556786] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 2.556791] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 2.556793] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 2.556798] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] status updated from unknown to disconnected > [ 2.556801] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 2.556806] [drm:drm_setup_crtcs] > [ 2.556810] [drm:drm_enable_connectors] connector 27 enabled? yes > [ 2.556812] [drm:drm_enable_connectors] connector 33 enabled? no > [ 2.556814] [drm:drm_enable_connectors] connector 36 enabled? no > [ 2.556817] [drm:drm_enable_connectors] connector 41 enabled? no > [ 2.556823] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1 > [ 2.556828] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0 > [ 2.556833] [drm:intel_fb_initial_config] connector LVDS-1 on pipe A [CRTC:21]: 1366x768 > [ 2.556837] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping > [ 2.556940] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0 > [ 2.556963] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping > [ 2.556967] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping > [ 2.556973] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 21 (0,0) > [ 2.556981] [drm:intelfb_create] no BIOS fb, allocating a new one > [ 2.556988] [drm:i915_gem_object_create_stolen] creating stolen object: size=408000 > [ 2.557006] [drm:i915_pages_create_for_stolen] offset=0x0, size=4227072 > [ 2.557870] [drm:intelfb_create] allocated 1366x768 fb: 0x00064000, bo ffff8800a1f36dc0 > [ 2.557992] fbcon: inteldrmfb (fb0) is primary device > [ 2.558111] [drm:connected_sink_compute_bpp] [CONNECTOR:27:LVDS-1] checking for sink bpp constrains > [ 2.558112] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 > [ 2.558114] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) > [ 2.558117] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 > [ 2.558119] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 > [ 2.558122] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff880242f5e400 for pipe A > [ 2.558123] [drm:intel_dump_pipe_config] cpu_transcoder: A > [ 2.558124] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 > [ 2.558126] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2481629, gmch_n: 4194304, link_m: 137868, link_n: 524288, tu: 64 > [ 2.558127] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 2.558129] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 > [ 2.558130] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 > [ 2.558131] [drm:intel_dump_pipe_config] requested mode: > [ 2.558134] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 2.558135] [drm:intel_dump_pipe_config] adjusted mode: > [ 2.558138] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 2.558140] [drm:intel_dump_crtc_timings] crtc timings: 71000 1366 1407 1434 1500 768 771 775 788, type: 0x48 flags: 0xa > [ 2.558141] [drm:intel_dump_pipe_config] port clock: 71000 > [ 2.558142] [drm:intel_dump_pipe_config] pipe src size: 1366x768 > [ 2.558143] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 > [ 2.558145] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 2.558146] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 2.558147] [drm:intel_dump_pipe_config] ips: 0 > [ 2.558148] [drm:intel_dump_pipe_config] double wide: 0 > [ 2.558150] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x21007, fp1: 0x30d07 > [ 2.558150] [drm:intel_dump_pipe_config] planes on this crtc > [ 2.558152] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0 > [ 2.558154] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 > [ 2.558155] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 > [ 2.558162] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz > [ 2.558194] [drm:intel_get_shared_dpll] CRTC:21 allocated PCH DPLL A > [ 2.558195] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A > [ 2.558213] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 2.558223] [drm:intel_disable_pipe] disabling pipe A > [ 2.835018] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 21 > [ 2.835023] [drm:intel_disable_shared_dpll] disabling PCH DPLL A > [ 2.835239] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A > [ 2.835799] [drm:intel_enable_pipe] enabling pipe A > [ 2.836606] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x700 > [ 2.836607] [drm:gen6_fdi_link_train] FDI train 1 done. > [ 2.837259] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600 > [ 2.837260] [drm:gen6_fdi_link_train] FDI train 2 done. > [ 2.837261] [drm:gen6_fdi_link_train] FDI train done. > [ 2.837264] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 21 > [ 2.837266] [drm:intel_enable_shared_dpll] enabling PCH DPLL A > [ 3.308497] [drm:intel_panel_enable_backlight] pipe A > [ 3.308507] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 3.324599] [drm:set_no_fbc_reason] Disabling FBC: disabled per chip default > [ 3.358083] [drm:intel_connector_check_state] [CONNECTOR:27:LVDS-1] > [ 3.358090] [drm:check_encoder_state] [ENCODER:28:LVDS-28] > [ 3.358094] [drm:check_encoder_state] [ENCODER:34:DAC-34] > [ 3.358099] [drm:check_encoder_state] [ENCODER:35:TMDS-35] > [ 3.358104] [drm:check_encoder_state] [ENCODER:40:TMDS-40] > [ 3.358112] [drm:check_crtc_state] [CRTC:21] > [ 3.358137] [drm:check_shared_dpll_state] PCH DPLL A > [ 3.358143] [drm:check_shared_dpll_state] PCH DPLL B > [ 3.358160] [drm:drm_fb_helper_hotplug_event] > [ 3.358164] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 3.358167] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 3.358192] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 3.358199] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 3.358202] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 3.358206] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 3.358212] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 3.358214] [drm:intel_crt_detect] CRT not detected via hotplug > [ 3.358382] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 3.358384] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 3.358545] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 3.358549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 3.358552] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 3.358555] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 3.358922] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 3.358925] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 3.358927] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 3.358931] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 3.358935] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 3.358938] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 3.484833] [drm:intel_hdmi_detect] Live status not up! > [ 3.484833] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 3.484837] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 3.484839] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 3.484845] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 3.484852] [drm:drm_setup_crtcs] > [ 3.484855] [drm:drm_enable_connectors] connector 27 enabled? yes > [ 3.484857] [drm:drm_enable_connectors] connector 33 enabled? no > [ 3.484859] [drm:drm_enable_connectors] connector 36 enabled? no > [ 3.484860] [drm:drm_enable_connectors] connector 41 enabled? no > [ 3.484864] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1 > [ 3.484866] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0 > [ 3.484869] [drm:intel_fb_initial_config] connector LVDS-1 on pipe A [CRTC:21]: 1366x768 > [ 3.484871] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping > [ 3.484872] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping > [ 3.484874] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping > [ 3.484877] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 21 (0,0) > [ 3.516863] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 3.566329] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=976/976 > [ 3.566335] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 3.817220] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on RC6p off RC6pp off > [ 4.862180] [drm:i915_gem_open] > [ 4.915309] [drm:i915_gem_open] > [ 4.915340] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4] > [ 4.916525] [drm:i915_gem_open] > [ 4.916549] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4] > [ 4.916556] [drm:drm_mode_getresources] [CRTC:21:crtc-0] > [ 4.916560] [drm:drm_mode_getresources] [CRTC:25:crtc-1] > [ 4.916563] [drm:drm_mode_getresources] [ENCODER:28:LVDS-28] > [ 4.916567] [drm:drm_mode_getresources] [ENCODER:34:DAC-34] > [ 4.916570] [drm:drm_mode_getresources] [ENCODER:35:TMDS-35] > [ 4.916573] [drm:drm_mode_getresources] [ENCODER:40:TMDS-40] > [ 4.916577] [drm:drm_mode_getresources] [CONNECTOR:27:LVDS-1] > [ 4.916580] [drm:drm_mode_getresources] [CONNECTOR:33:VGA-1] > [ 4.916583] [drm:drm_mode_getresources] [CONNECTOR:36:HDMI-A-1] > [ 4.916586] [drm:drm_mode_getresources] [CONNECTOR:41:DP-1] > [ 4.916590] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4] > [ 4.919855] [drm:i915_gem_open] > [ 4.919994] [drm:i915_gem_open] > [ 4.920548] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4] > [ 4.920558] [drm:drm_mode_getresources] [CRTC:21:crtc-0] > [ 4.920562] [drm:drm_mode_getresources] [CRTC:25:crtc-1] > [ 4.920566] [drm:drm_mode_getresources] [ENCODER:28:LVDS-28] > [ 4.920569] [drm:drm_mode_getresources] [ENCODER:34:DAC-34] > [ 4.920572] [drm:drm_mode_getresources] [ENCODER:35:TMDS-35] > [ 4.920576] [drm:drm_mode_getresources] [ENCODER:40:TMDS-40] > [ 4.920579] [drm:drm_mode_getresources] [CONNECTOR:27:LVDS-1] > [ 4.920582] [drm:drm_mode_getresources] [CONNECTOR:33:VGA-1] > [ 4.920585] [drm:drm_mode_getresources] [CONNECTOR:36:HDMI-A-1] > [ 4.920588] [drm:drm_mode_getresources] [CONNECTOR:41:DP-1] > [ 4.920592] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4] > [ 4.920645] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 4.920650] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 4.920654] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 4.920673] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 4.920680] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 4.920687] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 4.921007] [drm:intel_panel_get_backlight] get backlight PWM = 976 > [ 4.921053] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 4.921058] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 4.921061] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 4.921067] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 4.921071] [drm:intel_crt_detect] CRT not detected via hotplug > [ 4.921243] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 4.921247] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 4.921413] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 4.921421] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 4.921424] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 4.921429] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 4.921819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 4.921823] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 4.921827] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 4.921832] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 4.921840] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 4.921844] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 4.921848] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 4.921854] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 4.921857] [drm:intel_crt_detect] CRT not detected via hotplug > [ 4.922021] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 4.922024] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 4.922185] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 4.922190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 4.922193] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 4.922197] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 4.922551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 4.922556] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 4.922559] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 4.922564] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 4.922614] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 4.922619] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 4.922623] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 5.048969] [drm:intel_hdmi_detect] Live status not up! > [ 5.048979] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 5.048996] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 5.049002] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 5.049005] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 5.176978] [drm:intel_hdmi_detect] Live status not up! > [ 5.176988] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 5.177094] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 5.177100] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 5.177104] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 5.177112] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 5.177117] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 5.177120] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 5.177123] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 5.177128] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 5.177186] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 5.177191] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 5.177194] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 5.177215] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 5.177223] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 5.177229] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 5.180466] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 5.180476] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 5.180481] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 5.180489] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 5.180492] [drm:intel_crt_detect] CRT not detected via hotplug > [ 5.181372] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 5.181377] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 5.184750] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 5.184759] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 5.184763] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 5.184767] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 5.185285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 5.185290] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 5.185293] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 5.185299] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 5.185314] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 5.185318] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 5.185321] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 5.185327] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 5.185330] [drm:intel_crt_detect] CRT not detected via hotplug > [ 5.188387] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 5.188394] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 5.188663] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 5.188670] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 5.188674] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 5.188678] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 5.189259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 5.189265] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 5.189268] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 5.189274] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 5.189355] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 5.189361] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 5.189365] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 5.321051] [drm:intel_hdmi_detect] Live status not up! > [ 5.321060] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 5.321075] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 5.321079] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 5.321081] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 5.449030] [drm:intel_hdmi_detect] Live status not up! > [ 5.449036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 5.449106] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 5.449110] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 5.449112] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 5.449157] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 5.449161] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 5.449163] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 5.449165] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 5.449168] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 5.769106] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=976/976 > [ 5.769115] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 5.769270] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=976/976 > [ 5.769275] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 5.770027] [drm:drm_mode_addfb2] [FB:43] > [ 5.770108] [drm:drm_mode_setcrtc] [CRTC:21:crtc-0] > [ 5.770118] [drm:drm_mode_setcrtc] [CONNECTOR:27:LVDS-1] > [ 5.787820] [drm:drm_mode_setcrtc] [CRTC:25:crtc-1] > [ 6.382874] [drm:i915_gem_open] > [ 6.403483] [drm:i915_gem_context_create_ioctl] HW context 1 created > [ 6.406436] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed > [ 6.987835] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 6.987843] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 6.987846] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 6.987862] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 6.987867] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 6.987873] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 6.988278] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 6.988284] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 6.988289] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 6.988298] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 6.988300] [drm:intel_crt_detect] CRT not detected via hotplug > [ 6.989445] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 6.989451] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 6.989616] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 6.989621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 6.989626] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 6.989630] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 6.989987] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 6.989992] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 6.989996] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 6.990001] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 6.990014] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 6.990019] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 6.990023] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 6.990029] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 6.990032] [drm:intel_crt_detect] CRT not detected via hotplug > [ 6.990195] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 6.990201] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 6.990366] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 6.990372] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 6.990375] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 6.990378] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 6.990734] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 6.990738] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 6.990741] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 6.990745] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 6.990764] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 6.990769] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 6.990772] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 7.117164] [drm:intel_hdmi_detect] Live status not up! > [ 7.117174] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 7.117201] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 7.117206] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 7.117209] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 7.245265] [drm:intel_hdmi_detect] Live status not up! > [ 7.245278] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 7.245335] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 7.245342] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 7.245346] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 7.245354] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 7.245359] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 7.245362] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 7.245365] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 7.245370] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 7.248275] [drm:i915_gem_open] > [ 7.271783] [drm:i915_gem_context_create_ioctl] HW context 1 created > [ 7.274062] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed > [ 7.279895] [drm:i915_gem_context_create_ioctl] HW context 1 created > [ 7.314121] [drm:intel_panel_get_backlight] get backlight PWM = 976 > [ 7.314150] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=976/976 > [ 7.314153] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 7.315684] [drm:intel_panel_get_backlight] get backlight PWM = 976 > [ 7.315723] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=976/976 > [ 7.315728] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 8.667379] [drm:intel_panel_get_backlight] get backlight PWM = 976 > [ 8.667411] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=976/976 > [ 8.667414] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 8.675110] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 8.675118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 8.675121] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 8.675137] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 8.675142] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 8.675147] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 8.675562] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 8.675568] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 8.675572] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 8.675581] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 8.675584] [drm:intel_crt_detect] CRT not detected via hotplug > [ 8.675760] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 8.675765] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 8.675932] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 8.675937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 8.675941] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 8.675945] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 8.676301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 8.676306] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 8.676309] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 8.676314] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 8.676322] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 8.676326] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 8.676330] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 8.676335] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 8.676338] [drm:intel_crt_detect] CRT not detected via hotplug > [ 8.676567] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 8.676583] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 8.676770] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 8.676778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 8.676782] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 8.676787] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 8.677143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 8.677145] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 8.677147] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 8.677150] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 8.677167] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 8.677170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 8.677172] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 8.801414] [drm:intel_hdmi_detect] Live status not up! > [ 8.801428] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 8.801475] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 8.801481] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 8.801484] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 8.929425] [drm:intel_hdmi_detect] Live status not up! > [ 8.929439] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 8.929503] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 8.929510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 8.929514] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 8.929523] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 8.929529] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 8.929532] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 8.929536] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 8.929541] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 9.311506] [drm:drm_mode_addfb2] [FB:45] > [ 9.434770] [drm:drm_mode_addfb2] [FB:43] > [ 9.468625] [drm:drm_mode_addfb2] [FB:45] > [ 9.474006] [drm:drm_mode_addfb2] [FB:46] > [ 9.510879] [drm:drm_mode_addfb2] [FB:43] > [ 9.524282] [drm:drm_mode_addfb2] [FB:45] > [ 9.547128] [drm:drm_mode_addfb2] [FB:43] > [ 9.557894] [drm:drm_mode_addfb2] [FB:45] > [ 9.574656] [drm:drm_mode_addfb2] [FB:43] > [ 9.591349] [drm:drm_mode_addfb2] [FB:45] > [ 9.608071] [drm:drm_mode_addfb2] [FB:43] > [ 9.624798] [drm:drm_mode_addfb2] [FB:45] > [ 9.641571] [drm:drm_mode_addfb2] [FB:46] > [ 9.672676] [drm:drm_mode_addfb2] [FB:43] > [ 9.691868] [drm:drm_mode_addfb2] [FB:45] > [ 9.708717] [drm:drm_mode_addfb2] [FB:43] > [ 9.725354] [drm:drm_mode_addfb2] [FB:45] > [ 9.742551] [drm:drm_mode_addfb2] [FB:46] > [ 9.758853] [drm:drm_mode_addfb2] [FB:43] > [ 9.775616] [drm:drm_mode_addfb2] [FB:45] > [ 9.792353] [drm:drm_mode_addfb2] [FB:43] > [ 9.809113] [drm:drm_mode_addfb2] [FB:45] > [ 9.825919] [drm:drm_mode_addfb2] [FB:43] > [ 9.842739] [drm:drm_mode_addfb2] [FB:45] > [ 9.859584] [drm:drm_mode_addfb2] [FB:43] > [ 9.876205] [drm:drm_mode_addfb2] [FB:45] > [ 9.892919] [drm:drm_mode_addfb2] [FB:43] > [ 9.909673] [drm:drm_mode_addfb2] [FB:45] > [ 9.926420] [drm:drm_mode_addfb2] [FB:43] > [ 9.943187] [drm:drm_mode_addfb2] [FB:46] > [ 9.960036] [drm:drm_mode_addfb2] [FB:43] > [ 9.976713] [drm:drm_mode_addfb2] [FB:45] > [ 9.993479] [drm:drm_mode_addfb2] [FB:43] > [ 10.020853] [drm:drm_mode_addfb2] [FB:45] > [ 10.027019] [drm:drm_mode_addfb2] [FB:43] > [ 10.043799] [drm:drm_mode_addfb2] [FB:45] > [ 10.060577] [drm:drm_mode_addfb2] [FB:43] > [ 10.077357] [drm:drm_mode_addfb2] [FB:45] > [ 10.094137] [drm:drm_mode_addfb2] [FB:43] > [ 10.110894] [drm:drm_mode_addfb2] [FB:45] > [ 10.127572] [drm:drm_mode_addfb2] [FB:43] > [ 10.144278] [drm:drm_mode_addfb2] [FB:45] > [ 10.161120] [drm:drm_mode_addfb2] [FB:43] > [ 10.177916] [drm:drm_mode_addfb2] [FB:45] > [ 10.194680] [drm:drm_mode_addfb2] [FB:43] > [ 10.211419] [drm:drm_mode_addfb2] [FB:45] > [ 10.228217] [drm:drm_mode_addfb2] [FB:43] > [ 10.244972] [drm:drm_mode_addfb2] [FB:45] > [ 10.261607] [drm:drm_mode_addfb2] [FB:43] > [ 10.278457] [drm:drm_mode_addfb2] [FB:45] > [ 10.295127] [drm:drm_mode_addfb2] [FB:43] > [ 10.311867] [drm:drm_mode_addfb2] [FB:45] > [ 10.378519] [drm:drm_mode_addfb2] [FB:43] > [ 10.429068] [drm:drm_mode_addfb2] [FB:45] > [ 10.446022] [drm:drm_mode_addfb2] [FB:43] > [ 10.462628] [drm:drm_mode_addfb2] [FB:45] > [ 10.479386] [drm:drm_mode_addfb2] [FB:43] > [ 10.496116] [drm:drm_mode_addfb2] [FB:45] > [ 10.517023] [drm:drm_mode_addfb2] [FB:43] > [ 10.537662] [drm:drm_mode_addfb2] [FB:45] > [ 10.551847] [drm:drm_mode_addfb2] [FB:43] > [ 10.569785] [drm:drm_mode_addfb2] [FB:45] > [ 10.580062] [drm:drm_mode_addfb2] [FB:43] > [ 10.596810] [drm:drm_mode_addfb2] [FB:45] > [ 10.613587] [drm:drm_mode_addfb2] [FB:43] > [ 10.630321] [drm:drm_mode_addfb2] [FB:45] > [ 10.647077] [drm:drm_mode_addfb2] [FB:43] > [ 10.663855] [drm:drm_mode_addfb2] [FB:45] > [ 10.680602] [drm:drm_mode_addfb2] [FB:43] > [ 10.697347] [drm:drm_mode_addfb2] [FB:45] > [ 10.714084] [drm:drm_mode_addfb2] [FB:43] > [ 10.730878] [drm:drm_mode_addfb2] [FB:45] > [ 10.747635] [drm:drm_mode_addfb2] [FB:43] > [ 10.764384] [drm:drm_mode_addfb2] [FB:45] > [ 13.302005] [drm:drm_mode_addfb2] [FB:43] > [ 13.318698] [drm:drm_mode_addfb2] [FB:45] > [ 13.333249] [drm:drm_mode_addfb2] [FB:43] > [ 13.351162] [drm:drm_mode_addfb2] [FB:45] > [ 13.366732] [drm:drm_mode_addfb2] [FB:43] > [ 13.383857] [drm:drm_mode_addfb2] [FB:45] > [ 13.401245] [drm:drm_mode_addfb2] [FB:43] > [ 13.417395] [drm:drm_mode_addfb2] [FB:45] > [ 13.434642] [drm:drm_mode_addfb2] [FB:43] > [ 13.450799] [drm:drm_mode_addfb2] [FB:45] > [ 13.461921] [drm:drm_mode_addfb2] [FB:43] > [ 13.478776] [drm:drm_mode_addfb2] [FB:45] > [ 13.495530] [drm:drm_mode_addfb2] [FB:43] > [ 13.512290] [drm:drm_mode_addfb2] [FB:45] > [ 13.529050] [drm:drm_mode_addfb2] [FB:43] > [ 13.545804] [drm:drm_mode_addfb2] [FB:45] > [ 14.582716] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 14.582726] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 14.582729] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 14.582745] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 14.582750] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 14.582755] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 14.583088] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 14.583092] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 14.583095] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 14.583102] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 14.583104] [drm:intel_crt_detect] CRT not detected via hotplug > [ 14.583268] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 14.583271] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 14.583430] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 14.583435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 14.583437] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 14.583440] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 14.583788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 14.583791] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 14.583794] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 14.583799] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 14.583808] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 14.583811] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 14.583814] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 14.583818] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 14.583820] [drm:intel_crt_detect] CRT not detected via hotplug > [ 14.583978] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 14.583981] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 14.584135] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 14.584137] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 14.584139] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 14.584141] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 14.584490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 14.584492] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 14.584494] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 14.584497] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 14.584507] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 14.584510] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 14.584513] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 14.709970] [drm:intel_hdmi_detect] Live status not up! > [ 14.709983] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 14.710027] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 14.710032] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 14.710036] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 14.837970] [drm:intel_hdmi_detect] Live status not up! > [ 14.837988] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 14.838045] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 14.838052] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 14.838055] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 14.838063] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 14.838069] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 14.838072] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 14.838075] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 14.838080] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 14.842308] [drm:i915_gem_open] > [ 14.857855] [drm:i915_gem_context_create_ioctl] HW context 1 created > [ 14.859907] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed > [ 14.864321] [drm:i915_gem_context_create_ioctl] HW context 1 created > [ 14.912197] [drm:intel_panel_get_backlight] get backlight PWM = 976 > [ 14.912241] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=976/976 > [ 14.912246] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 14.913693] [drm:intel_panel_get_backlight] get backlight PWM = 976 > [ 14.913730] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=976/976 > [ 14.913735] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 16.574107] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 16.574117] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 16.574121] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 16.574143] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 16.574150] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 16.574157] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 16.574601] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 16.574608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 16.574612] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 16.574620] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 16.574624] [drm:intel_crt_detect] CRT not detected via hotplug > [ 16.574917] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 16.574921] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 16.575087] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 16.575093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 16.575097] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 16.575101] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 16.575457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 16.575462] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 16.575466] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 16.575471] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 16.575482] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 16.575486] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 16.575490] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 16.575496] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 16.575499] [drm:intel_crt_detect] CRT not detected via hotplug > [ 16.575673] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 16.575676] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 16.575847] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 16.575853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 16.575857] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 16.575860] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 16.576221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 16.576227] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 16.576229] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 16.576234] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 16.576259] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 16.576264] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 16.576268] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 16.702037] [drm:intel_hdmi_detect] Live status not up! > [ 16.702046] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 16.702074] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 16.702079] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 16.702083] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 16.830059] [drm:intel_hdmi_detect] Live status not up! > [ 16.830068] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] disconnected > [ 16.830106] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 16.830112] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 16.830116] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 16.830123] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 16.830128] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 16.830132] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 16.830135] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 16.830140] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 18.541523] [drm:i915_gem_open] > [ 18.564587] [drm:drm_mode_addfb2] [FB:43] > [ 18.606099] [drm:i915_gem_context_create_ioctl] HW context 1 created > [ 18.618890] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed > [ 18.919163] [drm:drm_mode_addfb2] [FB:45] > [ 18.950044] [drm:drm_mode_addfb2] [FB:43] > [ 18.975510] [drm:drm_mode_addfb2] [FB:45] > [ 19.321483] [drm:i915_gem_context_create_ioctl] HW context 1 created > [ 19.919379] [drm:drm_mode_addfb2] [FB:43] > [ 19.936317] [drm:drm_mode_addfb2] [FB:45] > [ 19.952842] [drm:drm_mode_addfb2] [FB:43] > [ 19.978852] [drm:drm_mode_addfb2] [FB:45] > [ 20.243124] [drm:drm_mode_addfb2] [FB:43] > [ 20.310299] [drm:drm_mode_addfb2] [FB:45] > [ 20.324487] [drm:drm_mode_addfb2] [FB:43] > [ 20.387895] [drm:drm_mode_addfb2] [FB:45] > [ 20.410310] [drm:drm_mode_addfb2] [FB:43] > [ 21.427857] [drm:drm_mode_addfb2] [FB:46] > [ 22.527829] [drm:drm_mode_addfb2] [FB:43] > [ 22.585946] [drm:drm_mode_addfb2] [FB:45] > [ 22.603988] [drm:drm_mode_addfb2] [FB:43] > [ 22.703175] [drm:drm_mode_addfb2] [FB:45] > [ 36.802794] [drm:drm_mode_addfb2] [FB:46] > [ 39.807509] [drm:drm_mode_addfb2] [FB:45] > [ 46.532998] [drm:drm_mode_addfb2] [FB:46] > [ 92.500770] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x00101012, pins 0x00000020 > [ 92.500782] [drm:intel_hpd_irq_handler] digital hpd port B - long > [ 92.500787] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 5 - cnt: 0 > [ 92.500856] [drm:intel_dp_hpd_pulse] got hpd irq on port B - long > [ 92.503438] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.505981] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.515573] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.523583] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.529075] [drm:i915_hotplug_work_func] running encoder hotplug functions > [ 92.529085] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 5) received hotplug event. > [ 92.529089] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 92.554324] [drm:drm_detect_monitor_audio] Monitor has basic audio support > [ 92.554338] [drm:intel_hpd_irq_event] [CONNECTOR:36:HDMI-A-1] status updated from disconnected to connected > [ 92.554344] [drm:i915_hotplug_work_func] Connector DP-1 (pin 5) received hotplug event. > [ 92.554349] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 92.556837] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.559324] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.567442] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.575557] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.583322] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 92.583332] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 92.583337] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 92.583357] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 92.583364] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 92.583371] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 92.583722] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 92.583726] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 92.583729] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 92.583736] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 92.583738] [drm:intel_crt_detect] CRT not detected via hotplug > [ 92.583965] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 92.583970] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 92.584155] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 92.584164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 92.584168] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 92.584172] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 92.584540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 92.584544] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 92.584547] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 92.584551] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 92.584562] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 92.584565] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 92.584568] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 92.584573] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 92.584576] [drm:intel_crt_detect] CRT not detected via hotplug > [ 92.584748] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 92.584752] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 92.584919] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 92.584925] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 92.584928] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 92.584932] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 92.585320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 92.585323] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 92.585325] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 92.585328] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 92.585340] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 92.585343] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 92.585346] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 92.610525] [drm:drm_detect_monitor_audio] Monitor has basic audio support > [ 92.610668] [drm:drm_edid_to_eld] ELD monitor SyncMaster > [ 92.610677] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 > [ 92.610681] [drm:drm_edid_to_eld] ELD size 36, SAD count 1 > [ 92.610735] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] probed modes : > [ 92.610743] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 > [ 92.610751] [drm:drm_mode_debug_printmodeline] Modeline 72:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 > [ 92.610758] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 > [ 92.610764] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 > [ 92.610771] [drm:drm_mode_debug_printmodeline] Modeline 65:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 > [ 92.610777] [drm:drm_mode_debug_printmodeline] Modeline 52:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 > [ 92.610784] [drm:drm_mode_debug_printmodeline] Modeline 54:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 > [ 92.610790] [drm:drm_mode_debug_printmodeline] Modeline 59:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 > [ 92.610797] [drm:drm_mode_debug_printmodeline] Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 > [ 92.610803] [drm:drm_mode_debug_printmodeline] Modeline 58:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 > [ 92.610810] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 > [ 92.610816] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 > [ 92.610823] [drm:drm_mode_debug_printmodeline] Modeline 49:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 > [ 92.610829] [drm:drm_mode_debug_printmodeline] Modeline 74:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 > [ 92.610835] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 > [ 92.610841] [drm:drm_mode_debug_printmodeline] Modeline 63:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa > [ 92.610848] [drm:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 > [ 92.610854] [drm:drm_mode_debug_printmodeline] Modeline 61:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 > [ 92.610860] [drm:drm_mode_debug_printmodeline] Modeline 51:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa > [ 92.610866] [drm:drm_mode_debug_printmodeline] Modeline 75:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa > [ 92.610873] [drm:drm_mode_debug_printmodeline] Modeline 53:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa > [ 92.610879] [drm:drm_mode_debug_printmodeline] Modeline 62:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa > [ 92.610885] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa > [ 92.610913] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 92.611157] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 92.611170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 92.611174] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 92.613665] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.616138] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.623479] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.631558] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.637080] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 92.637101] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 92.637104] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 92.637107] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 92.639595] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.642075] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.651563] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.659569] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 92.665084] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 92.667174] [drm:intel_panel_get_backlight] get backlight PWM = 976 > [ 92.667206] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=976/976 > [ 92.667209] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 92.672660] [drm:drm_mode_addfb2] [FB:64] > [ 92.672724] [drm:drm_mode_setcrtc] [CRTC:21:crtc-0] > [ 92.672731] [drm:drm_mode_setcrtc] [CONNECTOR:27:LVDS-1] > [ 92.702499] [drm:drm_mode_setcrtc] [CRTC:21:crtc-0] > [ 92.702509] [drm:drm_mode_setcrtc] [CONNECTOR:36:HDMI-A-1] > [ 92.702529] [drm:connected_sink_compute_bpp] [CONNECTOR:36:HDMI-A-1] checking for sink bpp constrains > [ 92.702532] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 > [ 92.702537] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output > [ 92.702539] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI > [ 92.702542] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 > [ 92.702545] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 > [ 92.702549] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff8800371e6800 for pipe A > [ 92.702551] [drm:intel_dump_pipe_config] cpu_transcoder: A > [ 92.702553] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 > [ 92.702556] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 > [ 92.702559] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 92.702562] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 > [ 92.702564] [drm:intel_dump_pipe_config] audio: 1, infoframes: 1 > [ 92.702566] [drm:intel_dump_pipe_config] requested mode: > [ 92.702570] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 > [ 92.702572] [drm:intel_dump_pipe_config] adjusted mode: > [ 92.702575] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 > [ 92.702578] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x0 flags: 0x5 > [ 92.702580] [drm:intel_dump_pipe_config] port clock: 148500 > [ 92.702583] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 > [ 92.702585] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 > [ 92.702587] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 92.702590] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 92.702592] [drm:intel_dump_pipe_config] ips: 0 > [ 92.702594] [drm:intel_dump_pipe_config] double wide: 0 > [ 92.702596] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x21007, fp1: 0x21007 > [ 92.702598] [drm:intel_dump_pipe_config] planes on this crtc > [ 92.702601] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled > [ 92.702604] [drm:intel_dump_pipe_config] FB:64, fb = 3286x1080 format = 0x34325258 > [ 92.702607] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 1366x768 dst (0, 0) 1366x768 > [ 92.702610] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0 > [ 92.702613] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 > [ 92.702655] [drm:intel_get_shared_dpll] CRTC:21 allocated PCH DPLL A > [ 92.702657] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A > [ 92.702680] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 92.702689] [drm:intel_disable_pipe] disabling pipe A > [ 92.985917] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 21 > [ 92.985931] [drm:intel_disable_shared_dpll] disabling PCH DPLL A > [ 92.986158] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A > [ 92.986772] [drm:intel_enable_pipe] enabling pipe A > [ 92.987585] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x100 > [ 92.987589] [drm:gen6_fdi_link_train] FDI train 1 done. > [ 92.988241] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600 > [ 92.988245] [drm:gen6_fdi_link_train] FDI train 2 done. > [ 92.988247] [drm:gen6_fdi_link_train] FDI train done. > [ 92.988254] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 21 > [ 92.988257] [drm:intel_enable_shared_dpll] enabling PCH DPLL A > [ 92.989638] [drm:intel_enable_hdmi_audio] Enabling HDMI audio on pipe A > [ 92.989648] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:36:HDMI-A-1], [ENCODER:35:TMDS-35] > [ 92.989653] [drm:ilk_audio_codec_enable] Enable audio codec on port B, pipe A, 36 bytes ELD > [ 92.989670] [drm:audio_config_hdmi_pixel_clock] Configuring HDMI audio for pixel clock 148500 (0x00090000) > [ 93.023157] [drm:intel_connector_check_state] [CONNECTOR:27:LVDS-1] > [ 93.023171] [drm:intel_connector_check_state] [CONNECTOR:36:HDMI-A-1] > [ 93.023178] [drm:check_encoder_state] [ENCODER:28:LVDS-28] > [ 93.023185] [drm:check_encoder_state] [ENCODER:34:DAC-34] > [ 93.023189] [drm:check_encoder_state] [ENCODER:35:TMDS-35] > [ 93.023193] [drm:check_encoder_state] [ENCODER:40:TMDS-40] > [ 93.023204] [drm:check_crtc_state] [CRTC:21] > [ 93.023231] [drm:check_shared_dpll_state] PCH DPLL A > [ 93.023238] [drm:check_shared_dpll_state] PCH DPLL B > [ 93.023415] [drm:intel_panel_get_backlight] get backlight PWM = 0 > [ 93.023462] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 93.025919] [drm:drm_mode_setcrtc] [CRTC:25:crtc-1] > [ 93.025934] [drm:drm_mode_setcrtc] [CONNECTOR:27:LVDS-1] > [ 93.025962] [drm:connected_sink_compute_bpp] [CONNECTOR:27:LVDS-1] checking for sink bpp constrains > [ 93.025967] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 > [ 93.025972] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) > [ 93.025979] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 1 > [ 93.025984] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 > [ 93.025990] [drm:intel_dump_pipe_config] [CRTC:25][modeset] config ffff88008d917c00 for pipe B > [ 93.025994] [drm:intel_dump_pipe_config] cpu_transcoder: B > [ 93.025998] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 > [ 93.026004] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2481629, gmch_n: 4194304, link_m: 137868, link_n: 524288, tu: 64 > [ 93.026009] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 93.026015] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 > [ 93.026019] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 > [ 93.026022] [drm:intel_dump_pipe_config] requested mode: > [ 93.026029] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 71000 1366 1407 1434 1500 768 771 775 788 0x0 0xa > [ 93.026033] [drm:intel_dump_pipe_config] adjusted mode: > [ 93.026040] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 93.026046] [drm:intel_dump_crtc_timings] crtc timings: 71000 1366 1407 1434 1500 768 771 775 788, type: 0x48 flags: 0xa > [ 93.026050] [drm:intel_dump_pipe_config] port clock: 71000 > [ 93.026054] [drm:intel_dump_pipe_config] pipe src size: 1366x768 > [ 93.026058] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 > [ 93.026063] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 93.026067] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 93.026071] [drm:intel_dump_pipe_config] ips: 0 > [ 93.026074] [drm:intel_dump_pipe_config] double wide: 0 > [ 93.026079] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0 > [ 93.026087] [drm:intel_dump_pipe_config] planes on this crtc > [ 93.026092] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0 > [ 93.026097] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0 > [ 93.026102] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0 > [ 93.026113] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz > [ 93.026175] [drm:intel_get_shared_dpll] CRTC:25 allocated PCH DPLL B > [ 93.026179] [drm:intel_get_shared_dpll] using PCH DPLL B for pipe B > [ 93.026211] [drm:intel_prepare_shared_dpll] setting up PCH DPLL B > [ 93.026802] [drm:intel_enable_pipe] enabling pipe B > [ 93.027615] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x100 > [ 93.027619] [drm:gen6_fdi_link_train] FDI train 1 done. > [ 93.028272] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600 > [ 93.028276] [drm:gen6_fdi_link_train] FDI train 2 done. > [ 93.028279] [drm:gen6_fdi_link_train] FDI train done. > [ 93.028286] [drm:intel_enable_shared_dpll] enable PCH DPLL B (active 0, on? 0) for crtc 25 > [ 93.028290] [drm:intel_enable_shared_dpll] enabling PCH DPLL B > [ 93.454175] [drm:intel_panel_enable_backlight] pipe B > [ 93.454191] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 93.499000] [drm:intel_connector_check_state] [CONNECTOR:27:LVDS-1] > [ 93.499014] [drm:check_encoder_state] [ENCODER:28:LVDS-28] > [ 93.499019] [drm:check_encoder_state] [ENCODER:34:DAC-34] > [ 93.499025] [drm:check_encoder_state] [ENCODER:35:TMDS-35] > [ 93.499028] [drm:check_encoder_state] [ENCODER:40:TMDS-40] > [ 93.499036] [drm:check_crtc_state] [CRTC:25] > [ 93.499060] [drm:check_shared_dpll_state] PCH DPLL A > [ 93.499068] [drm:check_shared_dpll_state] PCH DPLL B > [ 93.499199] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 93.499205] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 93.529077] [drm:intel_panel_get_backlight] get backlight PWM = 0 > [ 93.529121] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 93.529126] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 93.569022] [drm:intel_panel_get_backlight] get backlight PWM = 0 > [ 93.569096] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 93.569101] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 93.606699] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 93.606707] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 93.606710] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 93.606727] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 93.606731] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 93.606737] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 93.607174] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 93.607181] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 93.607185] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 93.607193] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 93.607197] [drm:intel_crt_detect] CRT not detected via hotplug > [ 93.607398] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 93.607402] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 93.607574] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 93.607580] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 93.607584] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 93.607588] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 93.607946] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 93.607951] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 93.607955] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 93.607960] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 93.607969] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 93.607973] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 93.607977] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 93.607982] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 93.607985] [drm:intel_crt_detect] CRT not detected via hotplug > [ 93.608165] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 93.608168] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 93.608375] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 93.608380] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 93.608384] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 93.608388] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 93.608748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 93.608750] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 93.608752] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 93.608754] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 93.608769] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 93.608772] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 93.608778] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 93.634074] [drm:drm_detect_monitor_audio] Monitor has basic audio support > [ 93.634174] [drm:drm_edid_to_eld] ELD monitor SyncMaster > [ 93.634180] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 > [ 93.634183] [drm:drm_edid_to_eld] ELD size 36, SAD count 1 > [ 93.634229] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] probed modes : > [ 93.634235] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 > [ 93.634239] [drm:drm_mode_debug_printmodeline] Modeline 72:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 > [ 93.634244] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 > [ 93.634248] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 > [ 93.634253] [drm:drm_mode_debug_printmodeline] Modeline 65:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 > [ 93.634257] [drm:drm_mode_debug_printmodeline] Modeline 52:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 > [ 93.634261] [drm:drm_mode_debug_printmodeline] Modeline 54:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 > [ 93.634265] [drm:drm_mode_debug_printmodeline] Modeline 59:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 > [ 93.634270] [drm:drm_mode_debug_printmodeline] Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 > [ 93.634274] [drm:drm_mode_debug_printmodeline] Modeline 58:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 > [ 93.634278] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 > [ 93.634283] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 > [ 93.634287] [drm:drm_mode_debug_printmodeline] Modeline 49:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 > [ 93.634291] [drm:drm_mode_debug_printmodeline] Modeline 74:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 > [ 93.634296] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 > [ 93.634300] [drm:drm_mode_debug_printmodeline] Modeline 63:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa > [ 93.634304] [drm:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 > [ 93.634308] [drm:drm_mode_debug_printmodeline] Modeline 61:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 > [ 93.634312] [drm:drm_mode_debug_printmodeline] Modeline 51:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa > [ 93.634316] [drm:drm_mode_debug_printmodeline] Modeline 75:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa > [ 93.634320] [drm:drm_mode_debug_printmodeline] Modeline 53:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa > [ 93.634324] [drm:drm_mode_debug_printmodeline] Modeline 62:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa > [ 93.634328] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa > [ 93.634359] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 93.634544] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 93.634547] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 93.634550] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 93.637017] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 93.639486] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 93.647561] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 93.655636] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 93.661135] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 93.661169] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 93.661173] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 93.661176] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 93.663651] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 93.666120] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 93.675646] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 93.683639] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 93.689180] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 93.691678] [drm:intel_panel_get_backlight] get backlight PWM = 0 > [ 93.691710] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 93.691713] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 93.845507] [drm:drm_mode_addfb2] [FB:43] > [ 93.882939] [drm:drm_mode_addfb2] [FB:64] > [ 93.915094] [drm:drm_mode_addfb2] [FB:43] > [ 93.940384] [drm:drm_mode_addfb2] [FB:64] > [ 93.956454] [drm:drm_mode_addfb2] [FB:43] > [ 94.119363] [drm:drm_mode_addfb2] [FB:64] > [ 94.722051] [drm:drm_mode_addfb2] [FB:43] > [ 97.874217] [drm:intel_panel_get_backlight] get backlight PWM = 0 > [ 97.874251] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 97.874254] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 97.874332] [drm:connected_sink_compute_bpp] [CONNECTOR:27:LVDS-1] checking for sink bpp constrains > [ 97.874335] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 > [ 97.874339] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) > [ 97.874343] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 1 > [ 97.874345] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 > [ 97.874349] [drm:intel_dump_pipe_config] [CRTC:25][modeset] config ffff880243cb5400 for pipe B > [ 97.874351] [drm:intel_dump_pipe_config] cpu_transcoder: B > [ 97.874353] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 > [ 97.874356] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2481629, gmch_n: 4194304, link_m: 137868, link_n: 524288, tu: 64 > [ 97.874359] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 97.874361] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 > [ 97.874363] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 > [ 97.874365] [drm:intel_dump_pipe_config] requested mode: > [ 97.874369] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 71000 1366 1407 1434 1500 768 771 775 788 0x0 0xa > [ 97.874371] [drm:intel_dump_pipe_config] adjusted mode: > [ 97.874375] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 97.874378] [drm:intel_dump_crtc_timings] crtc timings: 71000 1366 1407 1434 1500 768 771 775 788, type: 0x48 flags: 0xa > [ 97.874380] [drm:intel_dump_pipe_config] port clock: 71000 > [ 97.874382] [drm:intel_dump_pipe_config] pipe src size: 1366x768 > [ 97.874385] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 > [ 97.874387] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 97.874390] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 97.874391] [drm:intel_dump_pipe_config] ips: 0 > [ 97.874393] [drm:intel_dump_pipe_config] double wide: 0 > [ 97.874396] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x21007, fp1: 0x21007 > [ 97.874398] [drm:intel_dump_pipe_config] planes on this crtc > [ 97.874400] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 enabled > [ 97.874404] [drm:intel_dump_pipe_config] FB:43, fb = 3286x1080 format = 0x34325258 > [ 97.874407] [drm:intel_dump_pipe_config] scaler:0 src (0, 312) 1366x768 dst (0, 0) 1366x768 > [ 97.874410] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0 > [ 97.874413] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0 > [ 97.874420] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz > [ 97.874454] [drm:intel_get_shared_dpll] CRTC:25 allocated PCH DPLL B > [ 97.874456] [drm:intel_get_shared_dpll] using PCH DPLL B for pipe B > [ 97.875297] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 97.875307] [drm:intel_disable_pipe] disabling pipe B > [ 98.158167] [drm:intel_disable_shared_dpll] disable PCH DPLL B (active 1, on? 1) for crtc 25 > [ 98.158183] [drm:intel_disable_shared_dpll] disabling PCH DPLL B > [ 98.158424] [drm:intel_connector_check_state] [CONNECTOR:27:LVDS-1] > [ 98.158431] [drm:check_encoder_state] [ENCODER:28:LVDS-28] > [ 98.158437] [drm:check_encoder_state] [ENCODER:34:DAC-34] > [ 98.158443] [drm:check_encoder_state] [ENCODER:35:TMDS-35] > [ 98.158447] [drm:check_encoder_state] [ENCODER:40:TMDS-40] > [ 98.158454] [drm:check_crtc_state] [CRTC:25] > [ 98.158461] [drm:check_shared_dpll_state] PCH DPLL A > [ 98.158468] [drm:check_shared_dpll_state] PCH DPLL B > [ 98.159765] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 98.159990] [drm:connected_sink_compute_bpp] [CONNECTOR:36:HDMI-A-1] checking for sink bpp constrains > [ 98.159996] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 > [ 98.160003] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output > [ 98.160007] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI > [ 98.160012] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 2 > [ 98.160017] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 > [ 98.160023] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff880243cb5400 for pipe A > [ 98.160026] [drm:intel_dump_pipe_config] cpu_transcoder: A > [ 98.160029] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 > [ 98.160035] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 2, gmch_m: 6920601, gmch_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 > [ 98.160040] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 98.160045] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 > [ 98.160048] [drm:intel_dump_pipe_config] audio: 1, infoframes: 1 > [ 98.160051] [drm:intel_dump_pipe_config] requested mode: > [ 98.160058] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 > [ 98.160061] [drm:intel_dump_pipe_config] adjusted mode: > [ 98.160066] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5 > [ 98.160072] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x0 flags: 0x5 > [ 98.160075] [drm:intel_dump_pipe_config] port clock: 148500 > [ 98.160079] [drm:intel_dump_pipe_config] pipe src size: 1920x1080 > [ 98.160082] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 > [ 98.160087] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 98.160091] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 98.160094] [drm:intel_dump_pipe_config] ips: 0 > [ 98.160097] [drm:intel_dump_pipe_config] double wide: 0 > [ 98.160101] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4020002, dpll_md: 0x0, fp0: 0x21007, fp1: 0x21007 > [ 98.160104] [drm:intel_dump_pipe_config] planes on this crtc > [ 98.160109] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled > [ 98.160114] [drm:intel_dump_pipe_config] FB:43, fb = 3286x1080 format = 0x34325258 > [ 98.160120] [drm:intel_dump_pipe_config] scaler:0 src (1366, 0) 1920x1080 dst (0, 0) 1920x1080 > [ 98.160124] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 enabled > [ 98.160128] [drm:intel_dump_pipe_config] FB:46, fb = 64x64 format = 0x34325241 > [ 98.160133] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 64x64 dst (7, 280) 64x64 > [ 98.160139] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 > [ 98.160248] [drm:intel_get_shared_dpll] CRTC:21 allocated PCH DPLL A > [ 98.160253] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A > [ 98.160284] [drm:ilk_audio_codec_disable] Disable audio codec on port B, pipe A > [ 98.160310] [drm:intel_disable_pipe] disabling pipe A > [ 98.190305] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 21 > [ 98.190319] [drm:intel_disable_shared_dpll] disabling PCH DPLL A > [ 98.190542] [drm:intel_power_well_disable] disabling always-on > [ 98.190548] [drm:intel_power_well_enable] enabling always-on > [ 98.190555] [drm:intel_power_well_disable] disabling always-on > [ 98.190568] [drm:intel_connector_check_state] [CONNECTOR:36:HDMI-A-1] > [ 98.190575] [drm:check_encoder_state] [ENCODER:28:LVDS-28] > [ 98.190580] [drm:check_encoder_state] [ENCODER:34:DAC-34] > [ 98.190585] [drm:check_encoder_state] [ENCODER:35:TMDS-35] > [ 98.190589] [drm:check_encoder_state] [ENCODER:40:TMDS-40] > [ 98.190595] [drm:check_crtc_state] [CRTC:21] > [ 98.190601] [drm:check_shared_dpll_state] PCH DPLL A > [ 98.190608] [drm:check_shared_dpll_state] PCH DPLL B > [ 98.194957] [drm:drm_mode_addfb2] [FB:64] > [ 98.197689] [drm:drm_mode_setcrtc] [CRTC:25:crtc-1] > [ 98.197700] [drm:drm_mode_setcrtc] [CONNECTOR:36:HDMI-A-1] > [ 98.197725] [drm:connected_sink_compute_bpp] [CONNECTOR:36:HDMI-A-1] checking for sink bpp constrains > [ 98.197727] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24 > [ 98.197734] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output > [ 98.197736] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI > [ 98.197740] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe B, lanes 1 > [ 98.197742] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0 > [ 98.197746] [drm:intel_dump_pipe_config] [CRTC:25][modeset] config ffff88009863d400 for pipe B > [ 98.197748] [drm:intel_dump_pipe_config] cpu_transcoder: B > [ 98.197750] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0 > [ 98.197753] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 3029219, gmch_n: 4194304, link_m: 126217, link_n: 524288, tu: 64 > [ 98.197756] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 98.197759] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 > [ 98.197761] [drm:intel_dump_pipe_config] audio: 1, infoframes: 1 > [ 98.197763] [drm:intel_dump_pipe_config] requested mode: > [ 98.197767] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa > [ 98.197769] [drm:intel_dump_pipe_config] adjusted mode: > [ 98.197772] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa > [ 98.197775] [drm:intel_dump_crtc_timings] crtc timings: 65000 1024 1048 1184 1344 768 771 777 806, type: 0x0 flags: 0xa > [ 98.197777] [drm:intel_dump_pipe_config] port clock: 65000 > [ 98.197780] [drm:intel_dump_pipe_config] pipe src size: 1024x768 > [ 98.197782] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 > [ 98.197784] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 98.197787] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled > [ 98.197788] [drm:intel_dump_pipe_config] ips: 0 > [ 98.197790] [drm:intel_dump_pipe_config] double wide: 0 > [ 98.197793] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x88046004, dpll_md: 0x0, fp0: 0x21007, fp1: 0x21007 > [ 98.197795] [drm:intel_dump_pipe_config] planes on this crtc > [ 98.197797] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 enabled > [ 98.197801] [drm:intel_dump_pipe_config] FB:43, fb = 3286x1080 format = 0x34325258 > [ 98.197804] [drm:intel_dump_pipe_config] scaler:0 src (0, 312) 0x0 dst (0, 0) 0x0 > [ 98.197807] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0 > [ 98.197809] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0 > [ 98.197839] [drm:intel_get_shared_dpll] CRTC:25 allocated PCH DPLL A > [ 98.197841] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe B > [ 98.199731] [drm:intel_power_well_enable] enabling always-on > [ 98.199740] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A > [ 98.200320] [drm:intel_enable_pipe] enabling pipe B > [ 98.201129] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x100 > [ 98.201132] [drm:gen6_fdi_link_train] FDI train 1 done. > [ 98.201784] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600 > [ 98.201789] [drm:gen6_fdi_link_train] FDI train 2 done. > [ 98.201793] [drm:gen6_fdi_link_train] FDI train done. > [ 98.201799] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 25 > [ 98.201803] [drm:intel_enable_shared_dpll] enabling PCH DPLL A > [ 98.203176] [drm:intel_enable_hdmi_audio] Enabling HDMI audio on pipe B > [ 98.203179] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:36:HDMI-A-1], [ENCODER:35:TMDS-35] > [ 98.203182] [drm:ilk_audio_codec_enable] Enable audio codec on port B, pipe B, 36 bytes ELD > [ 98.203195] [drm:audio_config_hdmi_pixel_clock] HDMI audio pixel clock setting for 65000 not found, falling back to defaults > [ 98.203198] [drm:audio_config_hdmi_pixel_clock] Configuring HDMI audio for pixel clock 25200 (0x00010000) > [ 98.253537] [drm:intel_connector_check_state] [CONNECTOR:27:LVDS-1] > [ 98.253553] [drm:intel_connector_check_state] [CONNECTOR:36:HDMI-A-1] > [ 98.253560] [drm:check_encoder_state] [ENCODER:28:LVDS-28] > [ 98.253567] [drm:check_encoder_state] [ENCODER:34:DAC-34] > [ 98.253573] [drm:check_encoder_state] [ENCODER:35:TMDS-35] > [ 98.253577] [drm:check_encoder_state] [ENCODER:40:TMDS-40] > [ 98.253589] [drm:check_crtc_state] [CRTC:21] > [ 98.253596] [drm:check_crtc_state] [CRTC:25] > [ 98.253622] [drm:check_shared_dpll_state] PCH DPLL A > [ 98.253630] [drm:check_shared_dpll_state] PCH DPLL B > [ 98.253922] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 98.254616] [drm:drm_mode_setcrtc] [CRTC:21:crtc-0] > [ 98.254625] [drm:drm_mode_setcrtc] [CONNECTOR:27:LVDS-1] > [ 98.254643] [drm:connected_sink_compute_bpp] [CONNECTOR:27:LVDS-1] checking for sink bpp constrains > [ 98.254645] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24 > [ 98.254648] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18) > [ 98.254652] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 > [ 98.254654] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1 > [ 98.254658] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff880243cb5400 for pipe A > [ 98.254660] [drm:intel_dump_pipe_config] cpu_transcoder: A > [ 98.254662] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 > [ 98.254665] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2481629, gmch_n: 4194304, link_m: 137868, link_n: 524288, tu: 64 > [ 98.254668] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 > [ 98.254671] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 > [ 98.254673] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 > [ 98.254675] [drm:intel_dump_pipe_config] requested mode: > [ 98.254679] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa > [ 98.254681] [drm:intel_dump_pipe_config] adjusted mode: > [ 98.254685] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 98.254688] [drm:intel_dump_crtc_timings] crtc timings: 71000 1366 1407 1434 1500 768 771 775 788, type: 0x48 flags: 0xa > [ 98.254690] [drm:intel_dump_pipe_config] port clock: 71000 > [ 98.254692] [drm:intel_dump_pipe_config] pipe src size: 1024x768 > [ 98.254695] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0 > [ 98.254697] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 > [ 98.254699] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00ab0000, size: 0x04000300, enabled > [ 98.254701] [drm:intel_dump_pipe_config] ips: 0 > [ 98.254703] [drm:intel_dump_pipe_config] double wide: 0 > [ 98.254706] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4020002, dpll_md: 0x0, fp0: 0x21007, fp1: 0x21007 > [ 98.254707] [drm:intel_dump_pipe_config] planes on this crtc > [ 98.254710] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled > [ 98.254713] [drm:intel_dump_pipe_config] FB:43, fb = 3286x1080 format = 0x34325258 > [ 98.254716] [drm:intel_dump_pipe_config] scaler:0 src (1366, 0) 0x0 dst (0, 0) 0x0 > [ 98.254719] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 enabled > [ 98.254721] [drm:intel_dump_pipe_config] FB:46, fb = 64x64 format = 0x34325241 > [ 98.254725] [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 4294967289x4294967016 dst (7, 280) 4294967289x4294967016 > [ 98.254727] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0 > [ 98.254737] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz > [ 98.254788] [drm:intel_get_shared_dpll] CRTC:21 allocated PCH DPLL B > [ 98.254791] [drm:intel_get_shared_dpll] using PCH DPLL B for pipe A > [ 98.254820] [drm:intel_prepare_shared_dpll] setting up PCH DPLL B > [ 98.255412] [drm:intel_enable_pipe] enabling pipe A > [ 98.256232] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x100 > [ 98.256236] [drm:gen6_fdi_link_train] FDI train 1 done. > [ 98.256889] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600 > [ 98.256893] [drm:gen6_fdi_link_train] FDI train 2 done. > [ 98.256895] [drm:gen6_fdi_link_train] FDI train done. > [ 98.256902] [drm:intel_enable_shared_dpll] enable PCH DPLL B (active 0, on? 0) for crtc 21 > [ 98.256907] [drm:intel_enable_shared_dpll] enabling PCH DPLL B > [ 98.558274] [drm:intel_panel_enable_backlight] pipe A > [ 98.558291] [drm:intel_panel_actually_set_backlight] set backlight PWM = 976 > [ 98.593570] [drm:intel_connector_check_state] [CONNECTOR:27:LVDS-1] > [ 98.593584] [drm:check_encoder_state] [ENCODER:28:LVDS-28] > [ 98.593589] [drm:check_encoder_state] [ENCODER:34:DAC-34] > [ 98.593595] [drm:check_encoder_state] [ENCODER:35:TMDS-35] > [ 98.593598] [drm:check_encoder_state] [ENCODER:40:TMDS-40] > [ 98.593604] [drm:check_crtc_state] [CRTC:21] > [ 98.593629] [drm:check_shared_dpll_state] PCH DPLL A > [ 98.593636] [drm:check_shared_dpll_state] PCH DPLL B > [ 98.597328] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 98.597335] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 98.625227] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed > [ 98.627331] [drm:intel_panel_get_backlight] get backlight PWM = 0 > [ 98.627364] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 98.627367] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 98.660741] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 98.660751] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] > [ 98.660755] [drm:intel_lvds_detect] [CONNECTOR:27:LVDS-1] > [ 98.660774] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:27:LVDS-1] probed modes : > [ 98.660781] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 60 71000 1366 1407 1434 1500 768 771 775 788 0x48 0xa > [ 98.660788] [drm:drm_mode_getconnector] [CONNECTOR:27:?] > [ 98.661114] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 98.661120] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 98.661123] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 98.661133] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 98.661136] [drm:intel_crt_detect] CRT not detected via hotplug > [ 98.661373] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 98.661378] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 98.661631] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 98.661637] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 98.661641] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 98.661645] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 98.661996] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 98.661999] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 98.662001] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 98.662005] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 98.662015] [drm:drm_mode_getconnector] [CONNECTOR:33:?] > [ 98.662018] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] > [ 98.662021] [drm:intel_crt_detect] [CONNECTOR:33:VGA-1] force=1 > [ 98.662024] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 > [ 98.662026] [drm:intel_crt_detect] CRT not detected via hotplug > [ 98.662196] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 98.662201] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry > [ 98.662359] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) > [ 98.662364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 98.662368] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging > [ 98.662372] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 > [ 98.662726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga > [ 98.662731] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 > [ 98.662736] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] > [ 98.662740] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:33:VGA-1] disconnected > [ 98.662770] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 98.662775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] > [ 98.662782] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-1] > [ 98.687715] [drm:drm_detect_monitor_audio] Monitor has basic audio support > [ 98.687827] [drm:drm_edid_to_eld] ELD monitor SyncMaster > [ 98.687833] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0 > [ 98.687836] [drm:drm_edid_to_eld] ELD size 36, SAD count 1 > [ 98.687891] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:HDMI-A-1] probed modes : > [ 98.687898] [drm:drm_mode_debug_printmodeline] Modeline 45:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 > [ 98.687904] [drm:drm_mode_debug_printmodeline] Modeline 72:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 > [ 98.687910] [drm:drm_mode_debug_printmodeline] Modeline 48:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 > [ 98.687915] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 > [ 98.687921] [drm:drm_mode_debug_printmodeline] Modeline 65:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 > [ 98.687927] [drm:drm_mode_debug_printmodeline] Modeline 52:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 > [ 98.687932] [drm:drm_mode_debug_printmodeline] Modeline 54:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 > [ 98.687938] [drm:drm_mode_debug_printmodeline] Modeline 59:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 > [ 98.687943] [drm:drm_mode_debug_printmodeline] Modeline 55:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 > [ 98.687949] [drm:drm_mode_debug_printmodeline] Modeline 58:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 > [ 98.687955] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 > [ 98.687960] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 > [ 98.687965] [drm:drm_mode_debug_printmodeline] Modeline 49:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 > [ 98.687971] [drm:drm_mode_debug_printmodeline] Modeline 74:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 > [ 98.687977] [drm:drm_mode_debug_printmodeline] Modeline 50:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 > [ 98.687982] [drm:drm_mode_debug_printmodeline] Modeline 63:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa > [ 98.687988] [drm:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 > [ 98.687993] [drm:drm_mode_debug_printmodeline] Modeline 61:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 > [ 98.687998] [drm:drm_mode_debug_printmodeline] Modeline 51:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa > [ 98.688004] [drm:drm_mode_debug_printmodeline] Modeline 75:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa > [ 98.688009] [drm:drm_mode_debug_printmodeline] Modeline 53:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa > [ 98.688014] [drm:drm_mode_debug_printmodeline] Modeline 62:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa > [ 98.688020] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa > [ 98.688062] [drm:drm_mode_getconnector] [CONNECTOR:36:?] > [ 98.688247] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 98.688252] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 98.688255] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 98.690728] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 98.693186] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 98.699999] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 98.708012] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 98.713549] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 98.713576] [drm:drm_mode_getconnector] [CONNECTOR:41:?] > [ 98.713580] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] > [ 98.713582] [drm:intel_dp_detect] [CONNECTOR:41:DP-1] > [ 98.716049] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 98.718565] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 98.727997] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 98.735993] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7143003f > [ 98.741545] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:41:DP-1] disconnected > [ 98.742749] [drm:intel_panel_get_backlight] get backlight PWM = 0 > [ 98.742794] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 98.742799] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 98.771967] [drm:intel_panel_get_backlight] get backlight PWM = 0 > [ 98.772002] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 98.772005] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 98.794802] [drm:intel_panel_get_backlight] get backlight PWM = 0 > [ 98.794836] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 98.794839] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 98.817798] [drm:intel_panel_get_backlight] get backlight PWM = 0 > [ 98.817833] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/976 > [ 98.817836] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 > [ 98.981619] [drm:drm_mode_addfb2] [FB:46] > [ 99.034204] [drm:drm_mode_addfb2] [FB:66] > [ 99.069923] [drm:drm_mode_addfb2] [FB:46] > [ 99.089450] [drm:drm_mode_addfb2] [FB:66] > [ 99.107449] [drm:drm_mode_addfb2] [FB:46] > [ 99.215036] [drm:drm_mode_addfb2] [FB:66] > [ 99.816833] [drm:drm_mode_addfb2] [FB:46] > [ 138.989863] [drm:drm_mode_addfb2] [FB:66]
Powered by blists - more mailing lists