| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 22 Feb 2016 16:18:53 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: John Crispin <blogic@...nwrt.org>, Rob Herring <robh+dt@...nel.org>
CC: <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH V2] phy: ralink-usb: add driver for Mediatek/Ralink
Hi Rob,
On Tuesday 05 January 2016 01:03 AM, John Crispin wrote:
> Add a driver to setup the USB phy on Mediatek/Ralink SoCs.
> The driver is trivial and only sets up power and host mode.
>
> Signed-off-by: John Crispin <blogic@...nwrt.org>
> ---
> Changes in V2
> * remove refcounting
> * drop empty functions
> * dont use static globals
> * use explicit compatible strings
>
> .../devicetree/bindings/phy/ralink-usb-phy.txt | 17 ++
> drivers/phy/Kconfig | 8 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-ralink-usb.c | 175 ++++++++++++++++++++
> 4 files changed, 201 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
> create mode 100644 drivers/phy/phy-ralink-usb.c
>
> diff --git a/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
> new file mode 100644
> index 0000000..5b27cad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
> @@ -0,0 +1,17 @@
> +Mediatek/Ralink USB PHY
> +
> +Required properties:
> + - compatible: ralink,rt3352-usbphy or mediatek,mt7620-usbphy
> + - #phy-cells: should be 0
> + - resets: the two reset controllers for host and device
> + - reset-names: the names of the 2 reset controllers
> +
Does this binding documentation look okay to you? Should the documentation come
in a separate file?
Thanks
Kishon
> +Example:
> +
> +usbphy: phy {
> + compatible = "mediatek,mt7620-usbphy";
> + #phy-cells = <0>;
> +
> + resets = <&rstctrl 22 &rstctrl 25>;
> + reset-names = "host", "device";
> +};
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 03cb3ea..a336a5e 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -341,6 +341,14 @@ config PHY_XGENE
> help
> This option enables support for APM X-Gene SoC multi-purpose PHY.
>
> +config PHY_RALINK_USB
> + tristate "Ralink USB PHY driver"
> + select GENERIC_PHY
> + depends on RALINK
> + help
> + This option enables support for the Ralink USB PHY found inside
> + RT3352 and MT7620.
> +
> config PHY_STIH407_USB
> tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
> depends on RESET_CONTROLLER
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 075db1a..c840787 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -48,3 +48,4 @@ obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
> obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
> obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
> obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
> +obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o
> diff --git a/drivers/phy/phy-ralink-usb.c b/drivers/phy/phy-ralink-usb.c
> new file mode 100644
> index 0000000..6e045a8
> --- /dev/null
> +++ b/drivers/phy/phy-ralink-usb.c
> @@ -0,0 +1,175 @@
> +/*
> + * Allwinner ralink USB phy driver
> + *
> + * Copyright (C) 2016 John Crispin <blogic@...nwrt.org>
> + *
> + * Based on code from
> + * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/mach-ralink/ralink_regs.h>
> +
> +#define RT_SYSC_REG_SYSCFG1 0x014
> +#define RT_SYSC_REG_CLKCFG1 0x030
> +#define RT_SYSC_REG_USB_PHY_CFG 0x05c
> +
> +#define RT_RSTCTRL_UDEV BIT(25)
> +#define RT_RSTCTRL_UHST BIT(22)
> +#define RT_SYSCFG1_USB0_HOST_MODE BIT(10)
> +
> +#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25)
> +#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22)
> +#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20)
> +#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18)
> +
> +#define USB_PHY_UTMI_8B60M BIT(1)
> +#define UDEV_WAKEUP BIT(0)
> +
> +struct ralink_usb_phy {
> + struct reset_control *rstdev;
> + struct reset_control *rsthost;
> + u32 clk;
> + struct phy *phy;
> +};
> +
> +static int ralink_usb_phy_power_on(struct phy *_phy)
> +{
> + struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
> + u32 t;
> +
> + /* enable the phy */
> + rt_sysc_m32(0, phy->clk, RT_SYSC_REG_CLKCFG1);
> +
> + /* setup host mode */
> + rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1);
> +
> + /* deassert the reset lines */
> + reset_control_deassert(phy->rsthost);
> + reset_control_deassert(phy->rstdev);
> +
> + /*
> + * The SDK kernel had a delay of 100ms. however on device
> + * testing showed that 10ms is enough
> + */
> + mdelay(10);
> +
> + /* print some status info */
> + t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG);
> + dev_info(&phy->phy->dev, "remote usb device wakeup %s\n",
> + (t & UDEV_WAKEUP) ? ("enabled") : ("disabled"));
> + if (t & USB_PHY_UTMI_8B60M)
> + dev_info(&phy->phy->dev, "UTMI 8bit 60MHz\n");
> + else
> + dev_info(&phy->phy->dev, "UTMI 16bit 30MHz\n");
> +
> + return 0;
> +}
> +
> +static int ralink_usb_phy_power_off(struct phy *_phy)
> +{
> + struct ralink_usb_phy *phy = phy_get_drvdata(_phy);
> +
> + /* disable the phy */
> + rt_sysc_m32(phy->clk, 0, RT_SYSC_REG_CLKCFG1);
> +
> + /* assert the reset lines */
> + reset_control_assert(phy->rstdev);
> + reset_control_assert(phy->rsthost);
> +
> + return 0;
> +}
> +
> +static struct phy_ops ralink_usb_phy_ops = {
> + .power_on = ralink_usb_phy_power_on,
> + .power_off = ralink_usb_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct of_device_id ralink_usb_phy_of_match[] = {
> + {
> + .compatible = "ralink,rt3352-usbphy",
> + .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN |
> + RT_CLKCFG1_UPHY0_CLK_EN)
> + },
> + {
> + .compatible = "mediatek,mt7620-usbphy",
> + .data = (void *) (MT7620_CLKCFG1_UPHY1_CLK_EN |
> + MT7620_CLKCFG1_UPHY0_CLK_EN) },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, ralink_usb_phy_of_match);
> +
> +static int ralink_usb_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy_provider *phy_provider;
> + const struct of_device_id *match;
> + struct ralink_usb_phy *phy;
> +
> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy)
> + return -ENOMEM;
> +
> + match = of_match_device(ralink_usb_phy_of_match, &pdev->dev);
> + if (!match)
> + return -ENODEV;
> +
> + phy->clk = (int) match->data;
> +
> + phy->rsthost = devm_reset_control_get(&pdev->dev, "host");
> + if (IS_ERR(phy->rsthost)) {
> + dev_err(dev, "host reset is missing\n");
> + return PTR_ERR(phy->rsthost);
> + }
> +
> + phy->rstdev = devm_reset_control_get(&pdev->dev, "device");
> + if (IS_ERR(phy->rstdev)) {
> + dev_err(dev, "device reset is missing\n");
> + return PTR_ERR(phy->rstdev);
> + }
> +
> + phy->phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
> + if (IS_ERR(phy->phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(phy->phy);
> + }
> + phy_set_drvdata(phy->phy, phy);
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static struct platform_driver ralink_usb_phy_driver = {
> + .probe = ralink_usb_phy_probe,
> + .driver = {
> + .of_match_table = ralink_usb_phy_of_match,
> + .name = "ralink-usb-phy",
> + }
> +};
> +module_platform_driver(ralink_usb_phy_driver);
> +
> +MODULE_DESCRIPTION("Ralink USB phy driver");
> +MODULE_AUTHOR("John Crispin <blogic@...nwrt.org>");
> +MODULE_LICENSE("GPL v2");
>
Powered by blists - more mailing lists