| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 22 Feb 2016 13:20:51 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: linux-kernel@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Alan Cox <alan@...ux.intel.com>, Arnd Bergmann <arnd@...db.de>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Subject: [PATCH 2/2 v2] chrdev: allocate dynamic chardevs in all unused holes
This is a duct-tape-and-chewing-gum solution to the problem
with the major numbers running out when allocating major
numbers dynamically.
To avoid collisions in the major space, we supply a bitmap with
"holes" that exist in the lower range of major numbers [0-254]
and pick numbers from there, beginning with the unused char
device 8 and moving up through 26, 40, 60-63, 93-94, 102,
120-127, 159, 213-215, 222-223 and 234-254.
It will also FAIL if we actually fill up all free major
numbers. This seems to me like the reasonable thing to do
since the other numbers are, after all, reserved.
This also adds the macro BITS() to <linux/bitops.h> so we can
define the static bitmap at compiletime in a reasonable way.
If someone prefer that I just put opaque hex numbers in there,
then tell me, that works too, it's just not elegant IMO.
This also deletes the comment /* temporary */ which must be
one of the biggest lies ever.
This also updates the Documentation/devices.txt document to
reflect that all these numbers are used for dynamic assignment.
Reported-by: Ying Huang <ying.huang@...ux.intel.com>
Cc: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Alan Cox <alan@...ux.intel.com>
Cc: Arnd Bergmann <arnd@...db.de>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
ChangeLog v1->v2:
- Follow-up on the previous RFC patch, this uses Torvald's
suggested bitmap approach to allocate devices instead of
a list of free numbers.
- As a result of using find_first_zero_bit(), the major
numbers are assigned from low to high instead from high
to low. It's a bit scarier but I guess drivers using
dynamic numbers should be all right with it, I'm more
worried about userspaces expecting dynamic majors to
be in the [234,254] range. Input welcome, maybe I'm
just chicken.
- This still needs to be applied on top of the previous
fix to start warning about going below major 234. If
you prefer to just get this patch and get rid of the
problem then tell me.
---
Documentation/devices.txt | 22 ++++++++++++++--------
fs/char_dev.c | 46 ++++++++++++++++++++++++++++++++++------------
include/linux/bitops.h | 1 +
include/linux/fs.h | 2 --
4 files changed, 49 insertions(+), 22 deletions(-)
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 4035eca87144..2a4242be2fcd 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -248,6 +248,8 @@ Your cooperation is appreciated.
associated with block devices. The binding to the
loop devices is handled by mount(8) or losetup(8).
+ 8 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
+
8 block SCSI disk devices (0-15)
0 = /dev/sda First SCSI disk whole disk
16 = /dev/sdb Second SCSI disk whole disk
@@ -620,7 +622,7 @@ Your cooperation is appreciated.
2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
- 26 char
+ 26 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
@@ -863,7 +865,7 @@ Your cooperation is appreciated.
...
39 block
- 40 char
+ 40 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
40 block
@@ -1127,7 +1129,7 @@ Your cooperation is appreciated.
NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
- 60-63 char LOCAL/EXPERIMENTAL USE
+ 60-63 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
60-63 block LOCAL/EXPERIMENTAL USE
Allocated for local/experimental use. For devices not
@@ -1641,7 +1643,7 @@ Your cooperation is appreciated.
disks (see major number 3) except that the limit on
partitions is 15.
- 93 char
+ 93 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
93 block NAND Flash Translation Layer filesystem
0 = /dev/nftla First NFTL layer
@@ -1649,7 +1651,7 @@ Your cooperation is appreciated.
...
240 = /dev/nftlp 16th NTFL layer
- 94 char
+ 94 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
94 block IBM S/390 DASD block storage
0 = /dev/dasda First DASD device, major
@@ -1742,7 +1744,7 @@ Your cooperation is appreciated.
...
15 = /dev/amiraid/ar?p15 15th partition
-102 char
+102 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
102 block Compressed block device
0 = /dev/cbd/a First compressed block device, whole device
@@ -2027,7 +2029,7 @@ Your cooperation is appreciated.
1 = /dev/vnet1 2nd virtual network
...
-120-127 char LOCAL/EXPERIMENTAL USE
+120-127 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
120-127 block LOCAL/EXPERIMENTAL USE
Allocated for local/experimental use. For devices not
@@ -2341,7 +2343,7 @@ Your cooperation is appreciated.
1 = /dev/gfax1 GammaLink channel 1
...
-159 char RESERVED
+159 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
159 block RESERVED
@@ -2929,6 +2931,8 @@ Your cooperation is appreciated.
...
196 = /dev/dvb/adapter3/video0 first video decoder of fourth card
+213-215 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
+
216 char Bluetooth RFCOMM TTY devices
0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device
1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device
@@ -2971,6 +2975,8 @@ Your cooperation is appreciated.
same interface. For interface documentation see
http://www.vmelinux.org/.
+222-223 char RESERVED FOR DYNAMIC ALLOCATION OF MAJOR NUMBERS
+
224 char A2232 serial card
0 = /dev/ttyY0 First A2232 port
1 = /dev/ttyY1 Second A2232 port
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 687471dc04a0..d37319bca072 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -21,6 +21,8 @@
#include <linux/mutex.h>
#include <linux/backing-dev.h>
#include <linux/tty.h>
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
#include "internal.h"
@@ -37,6 +39,31 @@ static struct char_device_struct {
struct cdev *cdev; /* will die */
} *chrdevs[CHRDEV_MAJOR_HASH_SIZE];
+/*
+ * A bitmap for the 255 lower device numbers. A "1" means the
+ * major number is taken, a "0" means it is available. We first
+ * need to define all the assigned devices as taken so that
+ * dynamic device allocation will not go in and steal them.
+ */
+static u32 majors_map[] = {
+ /* 8 and 26 are free */
+ BITS(0, 7) | BITS(9, 25) | BITS(27, 31),
+ /* 40 and 60-63 are free */
+ BITS(0, 7) | BITS(9, 27),
+ /* 93 and 94 are free */
+ BITS(0, 28) | BIT(31),
+ /* 102 and 120-127 are free */
+ BITS(0, 5) | BITS(7, 23),
+ /* 159 is free */
+ BITS(0, 30),
+ /* No free numbers */
+ ~0x0U,
+ /* 213-215 and 222-223 are free */
+ BITS(0, 20) | BITS(24, 29),
+ /* 234-254 are free */
+ BITS(0, 9) | BIT(31)
+};
+
/* index in the above */
static inline int major_to_index(unsigned major)
{
@@ -84,22 +111,17 @@ __register_chrdev_region(unsigned int major, unsigned int baseminor,
mutex_lock(&chrdevs_lock);
- /* temporary */
if (major == 0) {
- for (i = ARRAY_SIZE(chrdevs)-1; i > 0; i--) {
- if (chrdevs[i] == NULL)
- break;
- }
-
- if (i < CHRDEV_MAJOR_DYN_END)
- pr_warn("CHRDEV \"%s\" major number %d goes below the dynamic allocation range",
- name, i);
-
- if (i == 0) {
+ major = find_first_zero_bit(majors_map, CHRDEV_MAJOR_HASH_SIZE);
+ if (major == CHRDEV_MAJOR_HASH_SIZE) {
+ pr_warn("CHRDEV: \"%s\" out of major numbers",
+ name);
ret = -EBUSY;
goto out;
}
- major = i;
+ set_bit(major, (unsigned long *)majors_map);
+ pr_dbg("CHRDEV: \"%s\" using major %d\n",
+ name, major);
}
cd->major = major;
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index defeaac0745f..73301256b474 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -4,6 +4,7 @@
#ifdef __KERNEL__
#define BIT(nr) (1UL << (nr))
+#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
#define BIT_ULL(nr) (1ULL << (nr))
#define BIT_MASK(nr) (1UL << ((nr) % BITS_PER_LONG))
#define BIT_WORD(nr) ((nr) / BITS_PER_LONG)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 6301ac091e54..1a2046275cdf 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2384,8 +2384,6 @@ static inline void bd_unlink_disk_holder(struct block_device *bdev,
/* fs/char_dev.c */
#define CHRDEV_MAJOR_HASH_SIZE 255
-/* Marks the bottom of the first segment of free char majors */
-#define CHRDEV_MAJOR_DYN_END 234
extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *);
extern int register_chrdev_region(dev_t, unsigned, const char *);
extern int __register_chrdev(unsigned int major, unsigned int baseminor,
--
2.4.3
Powered by blists - more mailing lists