linux-kernel - [PATCH v5 0/4] pinctrl: sunxi: Add H3 R

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1456146208-13890-1-git-send-email-k@japko.eu>
Date:	Mon, 22 Feb 2016 14:03:24 +0100
From:	Krzysztof Adamski <k@...ko.eu>
To:	Linus Walleij <linus.walleij@...aro.org>,
	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	Chen-Yu Tsai <wens@...e.org>,
	Hans de Goede <hdegoede@...hat.com>,
	Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>,
	Jens Kuske <jenskuske@...il.com>,
	Fabian Frederick <fabf@...net.be>,
	Vishnu Patekar <vishnupatekar0510@...il.com>,
	linux-gpio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Cc:	Krzysztof Adamski <k@...ko.eu>
Subject: [PATCH v5 0/4] pinctrl: sunxi: Add H3 R_PIO controller support

This patch series is extension of my original single patch with the same
subject. It adds support for R_PIO so that GPIO port L can be used in H3
based devices. It was tested on OrangePi PC and OrangePi Plus where PL
is connected amount others to an onboard led, a switch, an IR receiver
and some VCC controllers.

Patchset is based on next-20160222.

--- 

Changes since v4:
- remove patches that are alredy merged
- add patch describing leds and switch in DT

Changes since v3:
- collect some acked-bys
- fix r_pios #interrupt-cells

Changes since v2:
- fixed apb0 parrent clocks list
- moved binding documentation change to the proper patch
- simplified sunxi_pinctrl_gpio_get according to ChenYu suggestions
- fixed ordering in sunxi binding documentation

Changes since v1:
- splited patch to two separate - dtsi and c files
- added APB0 clocks a parent for R_PIO
- added fix in sunxi_pinctrl_gpio_get for getting pin value when in irq
  mode and on 2nd pinctrl
- fixed a "pwn" > "pwm" typo
- fixed order in allwinner,sunxi-pinctrl.txt


Krzysztof Adamski (4):
  clk: sunxi: Add apb0 gates for H3
  dts: sun8i-h3: Add APB0 related clocks and resets
  ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi
  ARM: dts: sun8i: Add leds and switch on Orangepi Plus boards

Krzysztof Adamski (4):
  clk: sunxi: Add apb0 gates for H3
  dts: sun8i-h3: Add APB0 related clocks and resets
  ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi
  ARM: dts: sun8i: Add leds and switch on Orangepi Plus boards

 Documentation/devicetree/bindings/clock/sunxi.txt |  2 +
 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts      | 63 +++++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3.dtsi                   | 37 +++++++++++++
 drivers/clk/sunxi/clk-simple-gates.c              |  4 ++
 4 files changed, 106 insertions(+)

-- 
2.1.4