| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1456157030-54677-8-git-send-email-andriy.shevchenko@linux.intel.com>
Date: Mon, 22 Feb 2016 18:03:42 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Viresh Kumar <vireshk@...nel.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Vinod Koul <vinod.koul@...el.com>,
linux-kernel@...r.kernel.org, dmaengine@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Hans-Christian Egtvedt <egtvedt@...fundet.no>,
Tejun Heo <tj@...nel.org>, Mark Brown <broonie@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mark Rutland <mark.rutland@....com>,
Vineet Gupta <vgupta@...opsys.com>
Cc: Mans Rullgard <mans@...sr.com>
Subject: [PATCH v2 07/15] dmaengine: dw: revisit data_width property
There are several changes are done here:
- Convert the property to be in bytes
Much more convenient than keeping encoded value.
- Use one value for all AHB masters for now
It seems in practice we have no controllers where masters have different
data bus width, we still might return to distinct values when there is a use
case.
- Rename data_width to data-width in the device tree bindings.
- While here, replace dwc_fast_ffs() by __ffs().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Signed-off-by: Mans Rullgard <mans@...sr.com>
---
Documentation/devicetree/bindings/dma/snps-dma.txt | 5 ++-
arch/arc/boot/dts/abilis_tb10x.dtsi | 2 +-
arch/arm/boot/dts/spear13xx.dtsi | 4 +--
drivers/dma/dw/core.c | 40 +++-------------------
drivers/dma/dw/platform.c | 10 +++---
drivers/dma/dw/regs.h | 2 +-
include/linux/platform_data/dma-dw.h | 5 ++-
7 files changed, 18 insertions(+), 50 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index c99c1ff..eb48229 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -13,8 +13,7 @@ Required properties:
- chan_priority: priority of channels. 0 (default): increase from chan 0->n, 1:
increase from chan n->0
- block_size: Maximum block size supported by the controller
-- data_width: Maximum data width supported by hardware per AHB master
- (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
+- data-width: Maximum data width supported by hardware (in bytes, power of 2)
Optional properties:
@@ -38,7 +37,7 @@ Example:
chan_allocation_order = <1>;
chan_priority = <1>;
block_size = <0xfff>;
- data_width = <3 3>;
+ data-width = <8>;
};
DMA clients connected to the Designware DMA controller must use the format
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
index cfb5052..2f53bed 100644
--- a/arch/arc/boot/dts/abilis_tb10x.dtsi
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -112,7 +112,7 @@
chan_allocation_order = <0>;
chan_priority = <1>;
block_size = <0x7ff>;
- data_width = <2>;
+ data-width = <4>;
clocks = <&ahb_clk>;
clock-names = "hclk";
};
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 14594ce..474b66f 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -117,7 +117,7 @@
chan_priority = <1>;
block_size = <0xfff>;
dma-masters = <2>;
- data_width = <3 3>;
+ data-width = <8>;
};
dma@...00000 {
@@ -133,7 +133,7 @@
chan_allocation_order = <1>;
chan_priority = <1>;
block_size = <0xfff>;
- data_width = <3 3>;
+ data-width = <8>;
};
fsmc: flash@...00000 {
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index d53e997..85b65e6 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -167,21 +167,6 @@ static void dwc_initialize(struct dw_dma_chan *dwc)
/*----------------------------------------------------------------------*/
-static inline unsigned int dwc_fast_ffs(unsigned long long v)
-{
- /*
- * We can be a lot more clever here, but this should take care
- * of the most common optimization.
- */
- if (!(v & 7))
- return 3;
- else if (!(v & 3))
- return 2;
- else if (!(v & 1))
- return 1;
- return 0;
-}
-
static inline void dwc_dump_chan_regs(struct dw_dma_chan *dwc)
{
dev_err(chan2dev(&dwc->chan),
@@ -711,7 +696,6 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
size_t offset;
unsigned int src_width;
unsigned int dst_width;
- unsigned int data_width;
u32 ctllo;
dev_vdbg(chan2dev(chan),
@@ -725,10 +709,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
dwc->direction = DMA_MEM_TO_MEM;
- data_width = dw->data_width[dwc->m_master];
-
- src_width = dst_width = min_t(unsigned int, data_width,
- dwc_fast_ffs(src | dest | len));
+ src_width = dst_width = __ffs(dw->data_width | src | dest | len);
ctllo = DWC_DEFAULT_CTLLO(chan)
| DWC_CTLL_DST_WIDTH(dst_width)
@@ -791,7 +772,6 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
dma_addr_t reg;
unsigned int reg_width;
unsigned int mem_width;
- unsigned int data_width;
unsigned int i;
struct scatterlist *sg;
size_t total_len = 0;
@@ -817,8 +797,6 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
DWC_CTLL_FC(DW_DMA_FC_D_M2P);
- data_width = dw->data_width[dwc->m_master];
-
for_each_sg(sgl, sg, sg_len, i) {
struct dw_desc *desc;
u32 len, dlen, mem;
@@ -826,8 +804,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
mem = sg_dma_address(sg);
len = sg_dma_len(sg);
- mem_width = min_t(unsigned int,
- data_width, dwc_fast_ffs(mem | len));
+ mem_width = __ffs(dw->data_width | mem | len);
slave_sg_todev_fill_desc:
desc = dwc_desc_get(dwc);
@@ -873,8 +850,6 @@ slave_sg_todev_fill_desc:
ctllo |= sconfig->device_fc ? DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
DWC_CTLL_FC(DW_DMA_FC_D_P2M);
- data_width = dw->data_width[dwc->m_master];
-
for_each_sg(sgl, sg, sg_len, i) {
struct dw_desc *desc;
u32 len, dlen, mem;
@@ -882,8 +857,7 @@ slave_sg_todev_fill_desc:
mem = sg_dma_address(sg);
len = sg_dma_len(sg);
- mem_width = min_t(unsigned int,
- data_width, dwc_fast_ffs(mem | len));
+ mem_width = __ffs(dw->data_width | mem | len);
slave_sg_fromdev_fill_desc:
desc = dwc_desc_get(dwc);
@@ -1536,10 +1510,7 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
/* Get hardware configuration parameters */
pdata->nr_channels = (dw_params >> DW_PARAMS_NR_CHAN & 7) + 1;
pdata->nr_masters = (dw_params >> DW_PARAMS_NR_MASTER & 3) + 1;
- for (i = 0; i < pdata->nr_masters; i++) {
- pdata->data_width[i] =
- (dw_params >> DW_PARAMS_DATA_WIDTH(i) & 3) + 2;
- }
+ pdata->data_width = 4 << (dw_params >> DW_PARAMS_DATA_WIDTH(0) & 3);
max_blk_size = dma_readl(dw, MAX_BLK_SIZE);
/* Fill platform data with the default values */
@@ -1561,8 +1532,7 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
/* Get hardware configuration parameters */
dw->nr_masters = pdata->nr_masters;
- for (i = 0; i < dw->nr_masters; i++)
- dw->data_width[i] = pdata->data_width[i];
+ dw->data_width = pdata->data_width;
/* Calculate all channel mask before DMA setup */
dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
index d3e1abc..0106bc5 100644
--- a/drivers/dma/dw/platform.c
+++ b/drivers/dma/dw/platform.c
@@ -102,8 +102,8 @@ dw_dma_parse_dt(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct dw_dma_platform_data *pdata;
- u32 tmp, arr[DW_DMA_MAX_NR_MASTERS];
u32 nr_channels;
+ u32 tmp;
if (!np) {
dev_err(&pdev->dev, "Missing DT data\n");
@@ -138,10 +138,10 @@ dw_dma_parse_dt(struct platform_device *pdev)
pdata->nr_masters = tmp;
}
- if (!of_property_read_u32_array(np, "data_width", arr,
- pdata->nr_masters))
- for (tmp = 0; tmp < pdata->nr_masters; tmp++)
- pdata->data_width[tmp] = arr[tmp];
+ if (!of_property_read_u32(np, "data-width", &tmp))
+ pdata->data_width = tmp;
+ else if (!of_property_read_u32(np, "data_width", &tmp))
+ pdata->data_width = BIT(tmp);
return pdata;
}
diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h
index feb3a4a..d0f9173 100644
--- a/drivers/dma/dw/regs.h
+++ b/drivers/dma/dw/regs.h
@@ -285,7 +285,7 @@ struct dw_dma {
/* hardware configuration */
unsigned char nr_masters;
- unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
+ unsigned char data_width;
};
static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index b881b97..4120a3e 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -42,8 +42,7 @@ struct dw_dma_slave {
* @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
* @block_size: Maximum block size supported by the controller
* @nr_masters: Number of AHB masters supported by the controller
- * @data_width: Maximum data width supported by hardware per AHB master
- * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
+ * @data_width: Maximum data width supported by hardware (in bytes)
*/
struct dw_dma_platform_data {
unsigned int nr_channels;
@@ -57,7 +56,7 @@ struct dw_dma_platform_data {
unsigned char chan_priority;
unsigned short block_size;
unsigned char nr_masters;
- unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
+ unsigned char data_width;
};
#endif /* _PLATFORM_DATA_DMA_DW_H */
--
2.7.0
Powered by blists - more mailing lists