| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 22 Feb 2016 14:55:28 -0700
From: Toshi Kani <toshi.kani@....com>
To: rjw@...ysocki.net, dan.j.williams@...el.com
Cc: robert.moore@...el.com, lv.zheng@...el.com, elliott@....com,
linux-nvdimm@...ts.01.org, linux-acpi@...r.kernel.org,
linux-kernel@...r.kernel.org, devel@...ica.org,
Toshi Kani <toshi.kani@....com>
Subject: [PATCH v2 1/3] ACPI/NFIT: Update Control Region Structure to comply ACPI 6.1
ACPI 6.1, Table 5-133, updates NVDIMM Control Region Structure
as follows.
- Valid Fields, Manufacturing Location, and Manufacturing Date
are added from reserved range. No change in the structure size.
- IDs defined as SPD values are arrays of bytes. The spec
clarified that they need to be represented as arrays of bytes
as well.
This patch makes the following changes to support this update.
- Change 'struct acpi_nfit_control_region' to reflect the update.
SPD IDs are defined as arrays of bytes, so that they can be
treated in the same way regardless of CPU endianness and are
not miss-treated as little-endian numeric values.
- Change the NFIT driver to show SPD ID values as array of bytes
in sysfs.
- Change sprintf format to use "0x" instead of "#" since "%#02x"
does not prepend '0' in some reason.
link: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
Signed-off-by: Toshi Kani <toshi.kani@....com>
Cc: Rafael J. Wysocki <rjw@...ysocki.net>
Cc: Dan Williams <dan.j.williams@...el.com>
Cc: Robert Moore <robert.moore@...el.com>
Cc: Lv Zheng <lv.zheng@...el.com>
Cc: Robert Elliott <elliott@....com>
Cc: <devel@...ica.org>
---
drivers/acpi/nfit.c | 20 +++++++++++++-------
include/acpi/actbl1.h | 24 +++++++++++++++---------
2 files changed, 28 insertions(+), 16 deletions(-)
diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c
index ad6d8c6..4982a18 100644
--- a/drivers/acpi/nfit.c
+++ b/drivers/acpi/nfit.c
@@ -722,7 +722,8 @@ static ssize_t vendor_show(struct device *dev,
{
struct acpi_nfit_control_region *dcr = to_nfit_dcr(dev);
- return sprintf(buf, "%#x\n", dcr->vendor_id);
+ return sprintf(buf, "0x%02x%02x\n",
+ dcr->vendor_id[0], dcr->vendor_id[1]);
}
static DEVICE_ATTR_RO(vendor);
@@ -731,7 +732,8 @@ static ssize_t rev_id_show(struct device *dev,
{
struct acpi_nfit_control_region *dcr = to_nfit_dcr(dev);
- return sprintf(buf, "%#x\n", dcr->revision_id);
+ return sprintf(buf, "0x%02x%02x\n",
+ dcr->revision_id[0], dcr->revision_id[1]);
}
static DEVICE_ATTR_RO(rev_id);
@@ -740,7 +742,8 @@ static ssize_t device_show(struct device *dev,
{
struct acpi_nfit_control_region *dcr = to_nfit_dcr(dev);
- return sprintf(buf, "%#x\n", dcr->device_id);
+ return sprintf(buf, "0x%02x%02x\n",
+ dcr->device_id[0], dcr->device_id[1]);
}
static DEVICE_ATTR_RO(device);
@@ -749,7 +752,7 @@ static ssize_t format_show(struct device *dev,
{
struct acpi_nfit_control_region *dcr = to_nfit_dcr(dev);
- return sprintf(buf, "%#x\n", dcr->code);
+ return sprintf(buf, "0x%02x%02x\n", dcr->code[0], dcr->code[1]);
}
static DEVICE_ATTR_RO(format);
@@ -758,7 +761,9 @@ static ssize_t serial_show(struct device *dev,
{
struct acpi_nfit_control_region *dcr = to_nfit_dcr(dev);
- return sprintf(buf, "%#x\n", dcr->serial_number);
+ return sprintf(buf, "0x%02x%02x%02x%02x\n",
+ dcr->serial_number[0], dcr->serial_number[1],
+ dcr->serial_number[2], dcr->serial_number[3]);
}
static DEVICE_ATTR_RO(serial);
@@ -956,7 +961,7 @@ static const struct attribute_group *acpi_nfit_region_attribute_groups[] = {
struct nfit_set_info {
struct nfit_set_info_map {
u64 region_offset;
- u32 serial_number;
+ u8 serial_number[4];
u32 pad;
} mapping[0];
};
@@ -1025,7 +1030,8 @@ static int acpi_nfit_init_interleave_set(struct acpi_nfit_desc *acpi_desc,
}
map->region_offset = memdev->region_offset;
- map->serial_number = nfit_mem->dcr->serial_number;
+ memcpy(map->serial_number, nfit_mem->dcr->serial_number,
+ sizeof(map->serial_number));
}
sort(&info->mapping[0], nr, sizeof(struct nfit_set_info_map),
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 16e0136..d8df62c 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -1040,15 +1040,18 @@ struct acpi_nfit_smbios {
struct acpi_nfit_control_region {
struct acpi_nfit_header header;
u16 region_index;
- u16 vendor_id;
- u16 device_id;
- u16 revision_id;
- u16 subsystem_vendor_id;
- u16 subsystem_device_id;
- u16 subsystem_revision_id;
- u8 reserved[6]; /* Reserved, must be zero */
- u32 serial_number;
- u16 code;
+ u8 vendor_id[2];
+ u8 device_id[2];
+ u8 revision_id[2];
+ u8 subsystem_vendor_id[2];
+ u8 subsystem_device_id[2];
+ u8 subsystem_revision_id[2];
+ u8 valid_fields;
+ u8 manufacturing_location;
+ u8 manufacturing_date[2];
+ u8 reserved[2]; /* Reserved, must be zero */
+ u8 serial_number[4];
+ u8 code[2];
u16 windows;
u64 window_size;
u64 command_offset;
@@ -1059,6 +1062,9 @@ struct acpi_nfit_control_region {
u8 reserved1[6]; /* Reserved, must be zero */
};
+/* Valid Fields */
+#define ACPI_NFIT_CONTROL_MFG_INFO_VALID (1) /* Manufacturing fields are valid */
+
/* Flags */
#define ACPI_NFIT_CONTROL_BUFFERED (1) /* Block Data Windows implementation is buffered */
Powered by blists - more mailing lists