| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1456210972-60639-3-git-send-email-qiujiang@huawei.com>
Date: Tue, 23 Feb 2016 15:02:52 +0800
From: qiujiang <qiujiang@...wei.com>
To: <linus.walleij@...aro.org>, <gnurou@...il.com>
CC: <mika.westerberg@...ux.intel.com>, <andy.shevchenko@...il.com>,
<linux-kernel@...r.kernel.org>, <linux-gpio@...r.kernel.org>,
<linux-acpi@...r.kernel.org>, <linuxarm@...wei.com>,
<haifeng.wei@...wei.com>, <charles.chenxin@...wei.com>
Subject: [PATCH v2 2/2] gpio: designware: add gpio-signaled acpi event for power button
This patch modifies the designware gpio controller driver to
support the gpio-signaled acpi events. This is used for power
button on hisilicon D02 board(an arm64 platform).
The corresponding DSDT table is defined as follows:
Device(GPI0) {
Name(_HID, "HISI0181")
Name(_ADR, 0)
Name(_UID, 0)
Name (_CRS, ResourceTemplate () {
Memory32Fixed (ReadWrite, 0x802e0000, 0x10000)
Interrupt (ResourceConsumer, Level, ActiveHigh,
Exclusive,,,) {344}
})
Device(PRTa) {
Name (_DSD, Package () {
Package () {
Package () {"reg",0},
Package () {"snps,nr-gpios",32},
}
})
}
Name (_AEI, ResourceTemplate () {
GpioInt(Edge, ActiveLow, ExclusiveAndWake, PullUp, ,
" \\_SB.GPI0") {8}
})
Method (_E08, 0x0, NotSerialized) {
Notify (\_SB.PWRB, 0x80)
}
}
Acked-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
Signed-off-by: qiujiang <qiujiang@...wei.com>
---
drivers/gpio/gpio-dwapb.c | 38 +++++++++++++++++++++++++++-----------
1 file changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 0ebbdf1..d961d3b 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -7,6 +7,7 @@
*
* All enquiries to support@...ochip.com
*/
+#include <linux/acpi.h>
#include <linux/gpio/driver.h>
/* FIXME: for gpio_get_value(), replace this with direct register read */
#include <linux/gpio.h>
@@ -25,6 +26,7 @@
#include <linux/spinlock.h>
#include <linux/platform_data/gpio-dwapb.h>
#include <linux/slab.h>
+#include "gpiolib.h"
#define GPIO_SWPORTA_DR 0x00
#define GPIO_SWPORTA_DDR 0x04
@@ -434,6 +436,10 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
else
port->is_registered = true;
+ /* Add GPIO-signaled ACPI event support */
+ if (pp->irq)
+ acpi_gpiochip_request_interrupts(&(port->gc));
+
return err;
}
@@ -447,7 +453,7 @@ static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
}
static struct dwapb_platform_data *
-dwapb_gpio_get_pdata_of(struct device *dev)
+dwapb_gpio_get_pdata(struct device *dev)
{
struct fwnode_handle *fwnode;
struct dwapb_platform_data *pdata;
@@ -455,9 +461,6 @@ dwapb_gpio_get_pdata_of(struct device *dev)
int nports;
int i;
- if (!IS_ENABLED(CONFIG_OF_GPIO) || !(dev->of_node))
- return ERR_PTR(-ENODEV);
-
nports = device_get_child_node_count(dev);
if (nports == 0)
return ERR_PTR(-ENODEV);
@@ -479,15 +482,13 @@ dwapb_gpio_get_pdata_of(struct device *dev)
if (fwnode_property_read_u32(fwnode, "reg", &pp->idx) ||
pp->idx >= DWAPB_MAX_PORTS) {
- dev_err(dev, "missing/invalid port index for %s\n",
- to_of_node(fwnode)->full_name);
+ dev_err(dev, "missing/invalid port index\n");
return ERR_PTR(-EINVAL);
}
if (fwnode_property_read_u32(fwnode, "snps,nr-gpios",
&pp->ngpio)) {
- dev_info(dev, "failed to get number of gpios for %s\n",
- to_of_node(fwnode)->full_name);
+ dev_info(dev, "failed to get number of gpios\n");
pp->ngpio = 32;
}
@@ -495,7 +496,7 @@ dwapb_gpio_get_pdata_of(struct device *dev)
* Only port A can provide interrupts in all configurations of
* the IP.
*/
- if (pp->idx == 0 &&
+ if (dev->of_node && pp->idx == 0 &&
of_property_read_bool(to_of_node(fwnode),
"interrupt-controller")) {
pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
@@ -505,9 +506,17 @@ dwapb_gpio_get_pdata_of(struct device *dev)
}
}
+ if (has_acpi_companion(dev) && pp->idx == 0)
+ pp->irq = platform_get_irq(to_platform_device(dev), 0);
+
pp->irq_shared = false;
pp->gpio_base = -1;
- pp->name = to_of_node(fwnode)->full_name;
+
+ if (dev->of_node)
+ pp->name = to_of_node(fwnode)->full_name;
+
+ if (has_acpi_companion(dev))
+ pp->name = acpi_dev_name(to_acpi_device_node(fwnode));
}
return pdata;
@@ -523,7 +532,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
struct dwapb_platform_data *pdata = dev_get_platdata(dev);
if (!pdata) {
- pdata = dwapb_gpio_get_pdata_of(dev);
+ pdata = dwapb_gpio_get_pdata(dev);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
}
@@ -580,6 +589,12 @@ static const struct of_device_id dwapb_of_match[] = {
};
MODULE_DEVICE_TABLE(of, dwapb_of_match);
+static const struct acpi_device_id dwapb_acpi_match[] = {
+ {"HISI0181", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, dwapb_acpi_match);
+
#ifdef CONFIG_PM_SLEEP
static int dwapb_gpio_suspend(struct device *dev)
{
@@ -674,6 +689,7 @@ static struct platform_driver dwapb_gpio_driver = {
.name = "gpio-dwapb",
.pm = &dwapb_gpio_pm_ops,
.of_match_table = of_match_ptr(dwapb_of_match),
+ .acpi_match_table = ACPI_PTR(dwapb_acpi_match),
},
.probe = dwapb_gpio_probe,
.remove = dwapb_gpio_remove,
--
1.9.1
Powered by blists - more mailing lists