linux-kernel - [PATCH v3 1/8] arm64: dts: qcom: add manual pullup setting to otg.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1456246186-18130-1-git-send-email-srinivas.kandagatla@linaro.org>
Date:	Tue, 23 Feb 2016 16:49:46 +0000
From:	Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To:	Andy Gross <andy.gross@...aro.org>, linux-arm-msm@...r.kernel.org
Cc:	Rob Herring <robh+dt@...nel.org>,
	Russell King <linux@....linux.org.uk>,
	linux-soc@...r.kernel.org, devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH v3 1/8] arm64: dts: qcom: add manual pullup setting to otg.

This patch adds manual pull up setting for usb otg indicating that the
vbus is vbus is not routed to USB controller/phy therefore enables
pull-up explicitly before starting controller.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index ff7ca44..c1592d4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -399,6 +399,7 @@
 			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
 			dr_mode = "peripheral";
 			qcom,otg-control = <2>; // PMIC
+			qcom,manual-pullup;
 
 			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
 				 <&gcc GCC_USB_HS_SYSTEM_CLK>,
-- 
1.9.1