| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1456411827-23962-12-git-send-email-peter.ujfalusi@ti.com>
Date: Thu, 25 Feb 2016 16:50:27 +0200
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: Tony Lindgren <tony@...mide.com>, <paul@...an.com>,
<robh+dt@...nel.org>
CC: Tero Kristo <t-kristo@...com>, <linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 11/11] ARM: DTS: dra7: Add nodes for McASP1/2/4/5/6/7/8
Add nodes to represent all McASP ports in the dra7 family.
For system consistency use the eDMA for audio operations. sDMA would be
fine for 4/5/6/7/8 since their DAT port is not through L3 interconnect.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
arch/arm/boot/dts/dra7.dtsi | 112 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 258e6712a76b..700382093922 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1464,6 +1464,38 @@
status = "disabled";
};
+ mcasp1: mcasp@...60000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp1";
+ reg = <0x48460000 0x2000>,
+ <0x45800000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@...64000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp2";
+ reg = <0x48464000 0x2000>,
+ <0x45c00000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
mcasp3: mcasp@...68000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp3";
@@ -1480,6 +1512,86 @@
status = "disabled";
};
+ mcasp4: mcasp@...6c000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp4";
+ reg = <0x4846c000 0x2000>,
+ <0x48436000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp5: mcasp@...70000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp5";
+ reg = <0x48470000 0x2000>,
+ <0x4843a000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp6: mcasp@...74000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp6";
+ reg = <0x48474000 0x2000>,
+ <0x4844c000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp7: mcasp@...78000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp7";
+ reg = <0x48478000 0x2000>,
+ <0x48450000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
+ mcasp8: mcasp@...7c000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp8";
+ reg = <0x4847c000 0x2000>,
+ <0x48454000 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
+ status = "disabled";
+ };
+
crossbar_mpu: crossbar@...02a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
--
2.7.1
Powered by blists - more mailing lists