| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1456408291-29559-1-git-send-email-minyard@acm.org> Date: Thu, 25 Feb 2016 07:51:31 -0600 From: minyard@....org To: kexec@...ts.infradead.org, linux-kernel@...r.kernel.org, Vivek Goyal <vgoyal@...hat.com>, Haren Myneni <hbabu@...ibm.com> Cc: minyard@....org, Corey Minyard <cminyard@...sta.com> Subject: [PATCH] kdump: Fix gdb macros work work with newer and 64-bit kernels From: Corey Minyard <cminyard@...sta.com> Lots of little changes needed to be made to clean these up, remove the four byte pointer assumption and traverse the pid queue properly. Also consolidate the traceback code into a single function instead of having three copies of it. Signed-off-by: Corey Minyard <cminyard@...sta.com> --- Documentation/kdump/gdbmacros.txt | 90 +++++++++++++++++---------------------- 1 file changed, 40 insertions(+), 50 deletions(-) I sent this earlier, but I didn't get a response. These are clearly wrong. I'd be happy to take over maintenance of these macros. It might be better to move them someplace else, too, since they are also useful for kgdb. diff --git a/Documentation/kdump/gdbmacros.txt b/Documentation/kdump/gdbmacros.txt index 9b9b454..e5bbd8d 100644 --- a/Documentation/kdump/gdbmacros.txt +++ b/Documentation/kdump/gdbmacros.txt @@ -15,14 +15,14 @@ define bttnobp set $tasks_off=((size_t)&((struct task_struct *)0)->tasks) - set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next) + set $pid_off=((size_t)&((struct task_struct *)0)->thread_group.next) set $init_t=&init_task set $next_t=(((char *)($init_t->tasks).next) - $tasks_off) while ($next_t != $init_t) set $next_t=(struct task_struct *)$next_t printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm printf "===================\n" - set var $stackp = $next_t.thread.esp + set var $stackp = $next_t.thread.sp set var $stack_top = ($stackp & ~4095) + 4096 while ($stackp < $stack_top) @@ -31,12 +31,12 @@ define bttnobp end set $stackp += 4 end - set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_t->thread_group.next) - $pid_off) while ($next_th != $next_t) set $next_th=(struct task_struct *)$next_th printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm printf "===================\n" - set var $stackp = $next_t.thread.esp + set var $stackp = $next_t.thread.sp set var $stack_top = ($stackp & ~4095) + 4096 while ($stackp < $stack_top) @@ -45,7 +45,7 @@ define bttnobp end set $stackp += 4 end - set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_th->thread_group.next) - $pid_off) end set $next_t=(char *)($next_t->tasks.next) - $tasks_off end @@ -54,42 +54,43 @@ document bttnobp dump all thread stack traces on a kernel compiled with !CONFIG_FRAME_POINTER end +define btthreadstruct + set var $pid_task = $arg0 + + printf "\npid %d; comm %s:\n", $pid_task.pid, $pid_task.comm + printf "task struct: " + print $pid_task + printf "===================\n" + set var $stackp = $pid_task.thread.sp + set var $stack_top = ($stackp & ~4095) + 4096 + set var $stack_bot = ($stackp & ~4095) + + set $stackp = *((unsigned long *) $stackp) + while (($stackp < $stack_top) && ($stackp > $stack_bot)) + set var $addr = *(((unsigned long *) $stackp) + 1) + info symbol $addr + set $stackp = *((unsigned long *) $stackp) + end +end +document btthreadstruct + dump a thread stack using the given task structure pointer +end + + define btt set $tasks_off=((size_t)&((struct task_struct *)0)->tasks) - set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next) + set $pid_off=((size_t)&((struct task_struct *)0)->thread_group.next) set $init_t=&init_task set $next_t=(((char *)($init_t->tasks).next) - $tasks_off) while ($next_t != $init_t) set $next_t=(struct task_struct *)$next_t - printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm - printf "===================\n" - set var $stackp = $next_t.thread.esp - set var $stack_top = ($stackp & ~4095) + 4096 - set var $stack_bot = ($stackp & ~4095) + btthreadstruct $next_t - set $stackp = *($stackp) - while (($stackp < $stack_top) && ($stackp > $stack_bot)) - set var $addr = *($stackp + 4) - info symbol $addr - set $stackp = *($stackp) - end - - set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_t->thread_group.next) - $pid_off) while ($next_th != $next_t) set $next_th=(struct task_struct *)$next_th - printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm - printf "===================\n" - set var $stackp = $next_t.thread.esp - set var $stack_top = ($stackp & ~4095) + 4096 - set var $stack_bot = ($stackp & ~4095) - - set $stackp = *($stackp) - while (($stackp < $stack_top) && ($stackp > $stack_bot)) - set var $addr = *($stackp + 4) - info symbol $addr - set $stackp = *($stackp) - end - set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off) + btthreadstruct $next_th + set $next_th=(((char *)$next_th->thread_group.next) - $pid_off) end set $next_t=(char *)($next_t->tasks.next) - $tasks_off end @@ -101,7 +102,7 @@ end define btpid set var $pid = $arg0 set $tasks_off=((size_t)&((struct task_struct *)0)->tasks) - set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next) + set $pid_off=((size_t)&((struct task_struct *)0)->thread_group.next) set $init_t=&init_task set $next_t=(((char *)($init_t->tasks).next) - $tasks_off) set var $pid_task = 0 @@ -113,29 +114,18 @@ define btpid set $pid_task = $next_t end - set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_t->thread_group.next) - $pid_off) while ($next_th != $next_t) set $next_th=(struct task_struct *)$next_th if ($next_th.pid == $pid) set $pid_task = $next_th end - set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_th->thread_group.next) - $pid_off) end set $next_t=(char *)($next_t->tasks.next) - $tasks_off end - printf "\npid %d; comm %s:\n", $pid_task.pid, $pid_task.comm - printf "===================\n" - set var $stackp = $pid_task.thread.esp - set var $stack_top = ($stackp & ~4095) + 4096 - set var $stack_bot = ($stackp & ~4095) - - set $stackp = *($stackp) - while (($stackp < $stack_top) && ($stackp > $stack_bot)) - set var $addr = *($stackp + 4) - info symbol $addr - set $stackp = *($stackp) - end + btthreadstruct $pid_task end document btpid backtrace of pid @@ -145,7 +135,7 @@ end define trapinfo set var $pid = $arg0 set $tasks_off=((size_t)&((struct task_struct *)0)->tasks) - set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next) + set $pid_off=((size_t)&((struct task_struct *)0)->thread_group.next) set $init_t=&init_task set $next_t=(((char *)($init_t->tasks).next) - $tasks_off) set var $pid_task = 0 @@ -157,13 +147,13 @@ define trapinfo set $pid_task = $next_t end - set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_t->thread_group.next) - $pid_off) while ($next_th != $next_t) set $next_th=(struct task_struct *)$next_th if ($next_th.pid == $pid) set $pid_task = $next_th end - set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off) + set $next_th=(((char *)$next_th->thread_group.next) - $pid_off) end set $next_t=(char *)($next_t->tasks.next) - $tasks_off end -- 2.5.0
Powered by blists - more mailing lists